Perfect Prime AR1890 v3 User manual

Digital Pressure Gauge
AR1890 v3
Instruction Manual

....................................................... 2
.............................................................. 2
..................................................... 3
.......................................... 4
................................................................. 5
.............................................. 6
................................................ 7 - 9
................................................ 10
....................................... 11
............................................ 12
..................................................... 12
CONTENTS
P. 1
1. INTENDED USE
2. FEATURES
3. SPECIFICATIONS
4. RANGE SPECIFICATIONS
5. DISPLAY
6. METER DESCRIPTION
7. KEY OPERATION
8. BASIC OPERATION
9. BATTERY REPLACEMENT
10. TROUBLESHOOTING
11. CONVERSIONS

1. INTENDED USE AND FEATURES
P. 2
This instrument can measure the air pressure of the single pipe or the
pressure dierence between two detection ports. It oers 12 units of
measurement and advanced features like DATA HOLD, MIN-MAX- AVG
mode, ZERO, DATA RECORD, and AUTO POWER OFF. It is widely used in
natural gas pipelines, air-conditioning refrigeration, and ventilation
systems, mechanical hydraulics, plastic molding, biopharmaceutical
molding, mining area pressure detection, gas, liquid, and production
industrial equipment pressure detection.
Thank you for purchasing this digital manometer. We recommend that
you read and follow the manual care fully before use.
• 12 selectable units of Measurement
• Pressure dierence measurement
• Maximum / minimum / average data mode
• Data hold function
• Data storage function with a time stamp
• Zero function
• Low battery alarm
• Automatic power o function
• Over range indicator: Hi, Lo
• USB for power supply
FEATURES

3. SPECIFICATIONS
P. 3
Pressure Range
Unit of Measure
Accuracy
Repeatability
Linearity/Hystersis
Data Storage
Response Time
Out of Range Indicator
Automatic Power Off Conditions
Operating Conditions
Storage Conditions
Power Supply
Dimensions
Weight
±2 .000 Psi
Pa , psi , kgfcm2, bar, inH2O, ftH2O,
inHg, mmHg , ozin2, mbar , cmH2O,
and kPa
±0.3% FSO (a t 25°C )
±0.2% (Max±0.5%FSO)
±0.29% FSO
99 groups
0.5s
Hi or Lo
No operation for 10 mins
O to 50°C (32 to 122°F)
-10 to 60°C ( 14 to 140°F)
1.5V x 3pcs AAA batteries
165 X 70 X 33mm
150g (without batteries)

P. 4
4. RANGE SPECIFICATIONS
Function
Pa
psi
kgfcm²
bar
inH2O
ftH2O
inHg
mmHg
ozin2
mbar
cmH2O
kPa
Range
±9999
±2.000
±0.140
±0.137
±55.40
±4.613
±4.070
±103.4
±32.00
±137.8
±140.6
±13.78
Resolution
1
0.001
0.001
0.001
0.01
0.001
0.001
0.1
0.01
0.1
0.1
0.01

5. DISPLAY
P. 5
7. Auto power o disable
Indicator
8. Elapsed Time
9. Total number of records
10. Reading Display
11. Pressure Units
1. Data Hold Function
2. Dierential Pressure Mode
3. Max Indicator
4. Min Indicator
5. Avg Indicator
6. Low Battery Indicator

6. METER DESCRIPTION
P. 6
1. P1 Tube Connector (+)
2. P2 Tube Connector (-)
3. LCD Display
4. BACKLIGHT Button
5. DIF Button
6. UN T Button
7. MODE Button
8. HOLD Button
9. Power on/o Button
10. Hanging Hole
11. Battery Cover
12. USB Socket (for power supply only)

7. KEY OPERATION
P. 7
1. Power on/off Button
•When the power r is o, short press the button to tu rn the meter on.
•When the powe is on,
In order to conserve battery life, the meter has an automatic power o
function (without operation after 10 minutes). The auto power o disable
indicator will appear on the display when the auto power o function
is disabled. The meter will now remain on until the user turns it o or until
the battery runs out.
a. Short press the button to disable and enable the automatic power
o function.
b. Press and hold the button to turn o the meter.
Backlight buttton
Mode buttton
Unit buttton
DIF buttton
Hold buttton
Power buttton
Note that the Auto Power OFF function will be reactivated the next time
the meter is turned o and then on.

MAX MODE - When in this mode, only the highest (MAX) reading
recorded since the button was rst pressed will appear on the
reading display.
MIN MODE - When in this mode, only the lowest (MIN) reading
recorded since the button was rst pressed will appear on the
reading display.
AVG MODE - When in this mode, only the average (AVG) reading
recorded since the button was rst pressed will appear on the
reading display.
7. KEY OPERATION
P. 8
2. BACKLIGHT BUTTON
a. Short press the button to store the current measured pressure
value with a time stamp (can store up to 99 groups).
b. Press and hold the button to open/close the backlight.
3. HOLD BUTTON
a. Short press the button to freeze/release the displayed reading.
b. Press and hold the button to clear the stored data.
b. Press and hold the button to view the stored data, the no.
indicator will appear on the right-hand comer of the LCD display, to
indicate that it is in the data review mode. Press the or button
to view the data one by one.
c. Press and hold the button again to exit the data review mode.
4. MODE BUTTON
a. Short press the button to enter the MAX, MIN, and AVG mode.

7. KEY OPERATION
P. 9
5. DIF BUTTON
a. Short press the button to enter P1 and P2 dual channel
dierential pressure mode. DIF icon will appear on the display.
b. Short press the button again to exit dierential pressure mode.
c. Press and hold the button to clear the drift zero. (The data before
measurement does not return to zero and without ttings attached
to the meter) .
6. UNIT BUTTON
a. Short press the button to select the desired measurement unit.
This meter oers up to 12 pressure units.
b. Press and hold the button to enter the time setting mode.
c. While on the time setting mode, short press on the button to exit
the time setting mode or save the setting.
7. OVER RANGE
will appear on the display when the pressure reading is
over the Maximum range.
will appear on the display when the pressure reading is
below the Minimum range.

8. BASIC OPERATION
P.10
1. Short press the button to turn on the meter and select the desired
measurement unit by pressing the button.
2. The reading before measurement and without ttings attached to the
meter should return to zero. If not, need to ZERO the meter by pressing
and holding the button for 3 seconds or until the display shows all
zeros.
3. Press and hold the button to enter the time setting if needed. The
current setting value will be blinking on the LCD, press the or
button to increase or decrease the value. Once the current setting value
is done press the or button to move forward or backward to the
next value setting. Short press the button to save the setting when
all are done.
4. Connect the tubing to the P1, P2 (or both ) input port(s). If both inputs
are used (D IF mode ), the meter displays a positive pressure reading if
the P1 pressure is greater than P2 and a negative reading if P2 is greater
than P1.
5. Short press the button to store the current measured pressure value
with a time stamp (can store up to 99 groups ).
Note that once the stored data reached the 99 groups, it will start to recor
d from scratch (the rst group R0 1) if you still press the button to
record. The previous records will be cleared up.
6. Press and hold the button to view the stored data, the no. indicator
will appear on the right-hand corner of the LCD display, to indicate that it
is in the data review mode. Press the or button to view the data
one by one.
7. To clear up the stored data, press and hold the button for 3 seconds.

9. BATTERY REPLACEMENT
P.11
If the meter is not turning on even when the button is pressed or if
the display shows replace the batteries with 3 pieces of AAA 1.5V
battery.
Dispose of the battery in an environmentally safe recycling point.
DO NOT DISPOSE IN YOUR BIN

10. TROUBLESHOOTING
11. CONVERSIONS
1. Power on but no display or the display disappears
a. Check the batteries if they are in place (in proper contact with the
pins) and incorrect polarity.
b. Remove the battery for one minute and re-install.
c. Replace the batteries.
2. For all other issues please contact your supplier.
P.12
TROUBLESHOOTING
CONVERSIONS
Useful conversion Factors
From
in of H2O
in of H2O
mm of Hg
To
in of Hg
cm of H2O
in of H2O
Multiplier
0.07355
2.54
0.03937

CUSTOMER SERVICE INQUIRIES
Your emails are important to us so we strive to reply all
inquiries and emails within 24 hours. In exceptional cases,
we may require more time to respond.
Thank you for your understanding.
For more information about our products and services,
please send us an email:
[email protected]
For B2B or project-based application, please send an email:
[email protected]
FOR MORE INFORMATION ABOUT PERFECTPRIME PLEASE VISIT
OUR ABOUT US PAGE AND FEEL FREE TO BROWSE.
Scan QR Code for the Product
Manual page (Multi-Language
available for certain products)
Scan QR Code for the Youtube
channel for video manual
Scan QR Code to register the
product for 1 year warranty

HORMES LIMITED
[email protected]
G/F UNIT 3, 61 GLENTHORNE ROAD,
LONDON W6 0LJ UNITED KINGDOM
[phone]
Retailer
Email
Address
Telephone