PerfecTron OXY5740C User manual

Version 1.0
Revision Date: Nov.13.2019
www.perfectron.com
OXY5740C
Intel® QM175 EBX SBC, Kabylake
i7-7820EQ (4C x 3.7/3.0 GHz), 8M Cache
Quick Installation Guide

Safety Information
1. Electrical safety
• To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before
relocating the system.
• When adding or removing devices to or from the system, ensure that the power cables for the
devices are unplugged before the signal cables are connected. If possible, disconnect all power
cables from the existing system before you add a device.
• Before connecting or removing signal cables from the motherboard, ensure that all power
cables are unplugged.
• Seek professional assistance before using an adapter or extension cord. These devices could
interrupt the grounding circuit.
• Make sure that your power supply is set to the correct voltage in your area.
• If you are not sure about the voltage of the electrical outlet you are using, contact your local
power company.
• If the power supply is broken, do not try to fix it by yourself. Contact a qualified service
technician or your local distributor.
2. Operation safety
• Before installing the motherboard and adding devices on it, carefully read all the manuals that
came with the package.
• Before using the product, make sure all cables are correctly connected and the power cables
are not damaged. If you detect any damage, contact your dealer immediately.
• To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots,
sockets and circuitry.
• Avoid dust, humidity, and temperature extremes. Do not place the product in any area where it
may become wet.
• Place the product on a stable surface.
• If you encounter any technical problems with the product, contact your local distributor
Statement
• All rights reserved. No part of this publication may be reproduced in any form or by any means,
without prior written permission from the publisher.
• All trademarks are the properties of the respective owners.
• All product specifications are subject to change without prior notice

Revision History
Revision Date(dd/mm/yyyy) Changes
Version 1.0 11/11/2019 Initial release
Packing list:
□CD (Driver + user's manual)
If any of the above items is damaged or missing, please contact your local
distributor.

Table of Contents
Chapter 1: Product Information
Safety Information ............................................................................................................................ 1
1. Electrical safety ..................................................................................................................... 1
2. Operation safety .................................................................................................................... 1
Statement ......................................................................................................................................... 1
Revision History ................................................................................................................................ 2
Packing list: ....................................................................................................................................... 2
Optional Accessories: ........................................................................................................................ 2
Table of Contents ........................................................................................................................... 3-4
Chapter 1: Product Information ........................................................................................................ 5
1.1 Block Diagram ..................................................................................................................... 5
1.2 Key Features ........................................................................................................................ 6
1.3 Board Placement ................................................................................................................. 8
Chapter 2: Jumpers and Connectors .................................................................................................. 9
2.1 Jumpers and connectors list................................................................................................. 9
2.2 Jumper Settings ................................................................................................................. 10
CN19: LVDS CONNECTOR ................................................................................................. 10
SW3: LVDS Resolution select ............................................................................................ 10
JP3: LVDS_VDD select ...................................................................................................... 12
CN18: Inverter connector ................................................................................................ 12
CPU FAN: CPU FAN Connector.......................................................................................... 13
CN1/CN3: Serial ATA Connectors ...................................................................................... 11
CN2/CN4: SATA POWER Connectors ................................................................................. 11
CN17: Digital I/O Box Head .............................................................................................. 11
JP14: MCARD1 mSATA and mPCIE selection ..................................................................... 12
MCARD1: Mini PCIE Card Slot<COLAY M SATA> .............................................................. 132
MCARD2: Mini PCIE Card Slot .......................................................................................... 13
LAN1/LAN2 ...................................................................................................................... 13
CN20: USB 2.0 ................................................................................................................. 14
CN21: USB 2.0 ................................................................................................................. 14
CN8: USB3.0 *2................................................................................................................ 14
CN9: USB3.0 *2................................................................................................................ 14
CN6: Audio Jacks Connector (MIC) ................................................................................... 15
CN7: Audio Jacks Connector (Line-Out) ............................................................................ 15
CN22: DC Adapter Power Input ...................................................................................... 115
DC_JACK1: DC-IN ............................................................................................................. 15

CN10: LPC (Update BIOS) ................................................................................................. 15
DP1: DISPLAY PORT .......................................................................................................... 15
DP2: DISPLAY PORT ........................................................................................................ 156
SIM_CARD1: SIM card socket ......................................................................................... 156
DVI: DVI-D ....................................................................................................................... 16
COM1: RS232/422/485 with 5V/12V selectable ............................................................... 16
JP4: COM1 5V/12V selection ......................................................................................... 16
JP5: COM2 5V/12V selection ......................................................................................... 16
COM2: RS232.................. .................................................................................................... 17
COM3/4: RS232 ............................................................................................................... 17
CON A1: CONNECTOR A TOP ............................................................................................ 18
LED1: LAN1 LED STATUS ................................................................................................... 20
LED2: LAN2 LED STATUS ................................................................................................... 20
LED3: POWER/HDD LED ................................................................................................... 20
SW1: POWER BUTTON ..................................................................................................... 20
FP1: Front Panel .............................................................................................................. 20
FP2: LAN LED ................................................................................................................... 21
CHAPTER 3: AMI BIOS UTILITY .......................................................................................................... 21
3.1 STARTING ....................................................................................................................... 21
3.2 NAVIGATION KEYS ......................................................................................................... 21
3.3 MAIN PAGE .................................................................................................................... 21
3.4 ADVANCED PAGE ........................................................................................................... 22
3.4.1 CPU Configuration…………………………………………………………………………………………..............23
3.4.2 Power & Performance…………………………………………………………..……………………………...……23
3.4.3 PCH-FW Configuration…………………………………………………………………………………….…...….…24
3.4.4 ACPI Setting……………………………………………………………………………………................……………24
3.4.5 IT8786 Super IO Configuration………………………………………………………………………...………….25
3.4.6 Hardware Monitor………………………………………………………………………………………………….…..27
3.4.7 CSM Configuration………………………………………………………………………………………........……..28
3.5 Chipset……………………………………………………………………………………………………………...…………….28
3.5.1 SA Configuration……………………………………………………………………………………..................…….29
3.5.1.1 Graphics Configuration…………………………………………….………………………………............…….29
3.5.1.2 LCD Control………………………………………………………………………………………….............…………30
3.5.2 PCH-IO Configuration……………………………………………………………………………………………………..31
3.6 Security………………………………………………………………………………………………………….........…………31
3.7 Boot…………………………………………………………………………………………………………...............…………31
3.8 Save & Exit…………………………………………………………………………………………….........................….32

Chapter 1: Product Information
1.1 Block Diagram

1.2 Key Features
System
CPU Type Intel® Kabylake-H Core™ i7/i5, BGA type
Intel® Core™ i7-7820EQ (8M Cache, up to 3.70 GHz)
Intel® Core™ i5-7440EQ (6M Cache, up to 3.60 GHz)
Chipset Intel® Haswell QM175 PCH
Memory Type 1 x DDR4 SO-DIMM up to 16GB SDRAM
BIOS AMI® UEFI BIOS
Supoer I/O ITE8786
Watchdog 1-255 sec. or 1-255 min. software programmable
can generate system reset
Expansion Slot 1 x Full-size mPCIe/mSATA and SIM
1 x Half-size mPCIe
Display
Chipset Intel® HD Graphics 630
DisplayPort 2, Max resolution up to 3840 x 2160
DVI-D 1, Max resolution up to 2048 x 1536
LVDS Dual channel 24-bit LVDS
Audio
Codec Realtek ALC887 High Definition Audio Codec
Ethernet
Chipset Intel® I210IT & i219-LM GbE
WOL Yes
Boot from LAN
Yes for PXE
Rear I/O
DisplayPort 1
DVI-D 1
Ethernet 2 x RJ45
COM Port 1 x RS232/422/485 with 5V/12V selectable
USB 2 x USB 3.0
Audio 1 x MIC, 1 x Line out
Front I/O
USB 2 x USB 3.0
Indicator LED LAN1, LAN2, Power, HDD LED
Power Button 1
Power Connector 1 (Terminal Block)
Internal I/O
Touch Panel 1 x 5-pin
Front Panel 1 x (2 x 5-pin)
Smart Fan 1 x CPU FAN
Power Connector 2 (1 x 4-pin/ 2 x 2-pin)
SATA 2 x SATAIII (6 Gb/s)
USB 4 x USB 2.0

COM 3 x RS232 (COM2 with 5V/12V selectable)
LVDS 2 x 15-pin
DIO 2 x 10-pin, 6 in/2 out with isolation
SIM card holder 1
Power Requirements
Input Voltage 12 VDC (4-pin terminal block for V+, V+, V-, V-)
Mechanical and Environment
Form Factor EBX
Power Type 12V DC-in
Dimension 203 x 146 mm (5.75" x 8")
Operating Temp. -40 to 85°C
Storage Temp. -40 to 85°C
Relative Humidity 10% to 90%, non-condensing
*All specifications and photos are subject to change without notice.

1.3 Board Placement

Chapter 2: Jumpers and Connectors
2.1 Jumpers and connectors list
Label
Functio
n
BAT1
BATTERY connector
DIMM
0
DDR
4
SO DIMM Socket
CN19 LVDS CONNECTOR
MCARD1
Mini PCIE Card Slot<
Full size Co
-
lay mSATA
>
JP14
mSATA and mPCIE selection
MCARD
2
Mini PCIE Card Slot
(Half Size)
CN
1/CN3
Serial ATA Connectors
CN
2/CN4
SATA POWER
LAN1
INTEL I21
9
LM
LAN2
INTEL I210IT
CN20/CN21
USB2.0
(Total 4 Port)
CN8
USB
3.0
x
2
CN9
USB
3.0
x
2
CN6
Audio Jacks Connector
(MIC
-
In)
CN7
Audio Jacks Connector
(Line
-
Out)
CN17
Digital I/O Box Head
CN1
0
LPC connector (
U
pdate
B
IOS
)
DP1
DISPLAY PORT
DP2
DISPLAY PORT
DVI
1
DVI
-
D
SIM_CARD1
SIM card socket
JP
4
COM
1
+12/+5V selection
JP
5
COM
2
+12/+5V selection
COM1
RS232/422/485 with 5V/12V selectable
COM2
RS232 with 5V/12V selectable
COM3
RS232
COM4
RS232
DC
_
JACK
1
ATX12V
DC connector
CN22
4P
DC
Terminal Block
connector
CPU FAN
CPU FAN CONNECTOR
LED1 LAN1 LED STATUS
LED2
LAN2 LED STATUS
LED3
POWER/HDD LED
SW1
POWER BUTTON
CN18
LVD
S
POWER BOX HEADER
SW3
LVDS Resolution sele
ction
FP1
Front Panel
FP
2
LAN LED

2.2 Jumper Settings
CN19: LVDS CONNECTOR
PIN
DEFINITION
PIN
DEFINITION
1
LVDS_BCLK
2
GND
3
LVDS_BCLK#
4
LVDS_A3
5
GND
6
LVDS_A3#
7
LVDS_B3
8
GND
9
LVDS_B3#
10
LVDS_ACLK
11
LVDS_B2
12
LVDS_ ACLK #
13
LVDS_B2#
14
GND
15
LVDS_B1
16
LVDS_A2
17
LVDS_B1#
18
LVDS_A2#
19
LVDS_B0
20
LVDS_A1
21
LVDS_B0#
22
LVDS_A1#
23
GND
24
LVDS_A0
25
LVDS_DCC_SC
26
LVDS_A0#
27
LVDS_DCC_SD
28
GND
29
LVDS_VDD
(define by J
P3
)
30
LVDS_VDD
(define by J
P3
)
SW3: LVDS Resolution select
SW3
1
2
3
4
DEFINITION
on on on on 800*600/18bit (single)
off on on on
1024*768/18bit (single)
on off on on 1024*768/24bit (single)
off off on on 1280*800/18bit(single)
on on off on 1280*1024/24bit (dual)
off on off on 1366*768/24bit(single)
on off off on 1440*900/24bit (dual)
off off off on 1920*1080/24bit (dual)
JP3: LVDS_VDD select
Jumper
Function description
Setting
1-2 3.3V
2-3 5V
Default setting: 2
-
3

CN18: Inverter connector
PIN
DEFINITION
1
12V
2
12V
3
12V
4
5VS
5
5VS
6
GND
7
GND
8
BL_EN
9
LVDS0_BKL_CTRL_R
10
GND
CPU FAN: CPU FAN Connector
PIN
DEFINITION
1 CPUFAN_PWN
2 CPUFAN_IO
3
CPUFAN_VCC
4
GND
CN1/CN3: Serial ATA Connectors
PIN
DEFINITION
1
GND
2
TXP
3
TXN
4
GND
5
RXN
6
RXP
7
GND
CN2/CN4: SATA POWER Connector
PIN
DEFINITION
1
12V
2
GND
3
GND
4
5VS
CN17: Digital I/O Box Head
PIN
DEFINITION
PIN
DEFINITION
1
VCC
2
GND
3
DI_0
4
DI_1
5
DI_2
6
DI_3
7 DI_4 8 DI_5
9 DO_0 10 DO_1

JP14: MCARD1 mSATA and mPCIE selection
Jumper
Function description
Setting
1-2 mPCIE
2-3 mSATA
Default setting:
1
-
2
MCARD1: Mini PCIE Card Slot<COLAY M SATA>
PIN
DEFINITION
PIN
DEFINITION
1
WAKE#
2
3.3V
AUX
3
COEX1
4
GND
5
COEX2
6
1.5V
7
CLKREQ#
8
UIM_PWR
9
GND
10
UIM_
DATA
11
REFCLK
-
12
UIM_CLK
13
REFCLK+
14
UIM_RESET
15
GND
16
UIM_VPP
17
Reserved
18
GND
19
Reserved
20
W_Disable#
21
GND
22
PERST#
23
PERn0
24
+3.3Vaux
25
PERp0
26
GND
27
GND
28
1.5V
29
GND
30
SMB_CLK
31
PETn0
32
SMB_DA
TA
33
PETp0
34
GND
35
GND
36
USB_D
-
37
GND
38
USB_D+
39
+3.3VAUX
40
GND
41
+3.3VAUX
42
LED_WWAN#
43
GND
44
LED_WLAN#
45
Reserved
46
LED_WPAN#
47
Reserved
48
1.5V
49
Reserved
50
GND
51
Reserved
52
3.3VAUX

MCARD2: Mini PCIE Card Slot
PIN DEFINITION PIN DEFINITION
1 WAKE# 2 3.3V
3 Reserved 4 GND
5 Reserved 6 1.5V
7 CLKREQ# 8 UIM_PWR
9 GND 10 UIM_DATA
11 REFCLK- 12 UIM_CLK
13 REFCLK+ 14 UIM_RESET
15 GND 16 UIM_VPP
17 Reserved 18 GND
19 Reserved 20 W_Disable#
21 GND 22 PERST#
23 PERn0 24 3.3Vaux
25 PERp0 26 GND
27 GND 28 1.5V
29 GND 30 SMB_CLK
31 PETn0 32 SMB_DATA
33 PETp0 34 GND
35 GND 36 USB_D-
37 Reserved 38 USB_D+
39 Reserved 40 GND
41 Reserved 42 LED_WWAN#
43 Reserved 44 LED_WLAN#
45 Reserved 46 LED_WPAN#
47 Reserved 48 1.5V
49 Reserved 50 GND
51 Reserved 52 3.3V
LAN1: Intel I219LM
LAN2: Intel I210IT
LAN1
LAN2
PIN
DEFINITION
PIN
DEFINITION
A
1
I218_LAN1_MDI0_DP
B
1
LAN2_MDIP0
A2
I218_LAN1_MDI0_DN
B2
LAN2_MDIN0
A3
I218_LAN1_MDI1_DP
B3
LAN2_MDIP1
A4
I218_L
AN1_MDI1_DN
B4
LAN2_MDIN1
A7
I218_LAN1_MDI2_DP
B7
LAN2_MDIP2
A8
I218_LAN1_MDI2_DN
B8
LAN2_MDIN2
A9
I218_LAN1_MDI3_DP
B9
LAN2_MDIP3
A10
I218_LAN1_MDI3_DN
B10
LAN2_MDIN3

CN20: USB 2.0
PIN
DEFINITION
1
5V
2
USB1
-
3
USB1+
4
GND
5
GND
6
5V
7
USB2
-
8
USB2+
9
GND
10 GND
CN21: USB 2.0
PIN
DEFINITION
1
5V
2
USB1
-
3
USB1+
4
GND
5
GND
6
5V
7
USB2
-
8
USB2+
9
GND
10 GND
CN8: USB3.0 *2
LOWER USB
UPPER USB
PIN
DEFINITION
PIN
DEFINITION
1
USB_VCC0
1
0
USB
_VCC1
2
USBD2
-
11
USBD3
-
3
USBD2+
12
USBD3+
4
GND
13
GND
5
USB_SSRX1N_C
14
USB_SSRX2N_C
6
USB_SSRX1P_C
15
USB_SSRX2P_C
7
GND
16
GND
8
USB3TN1
17
USB3TN2
9
USB3TP1
18
USB3TP2
CN9: USB3.0 *2
LOWER USB
UPPER USB
PIN
DEFINITION
PIN
DEFINI
TION
1
USB_VCC2
1
0
USB_VCC3
2
USBD0
-
11
USBD1
-
3
USBD0+
12
USBD1+
4
GND
13
GND
5
USB_SSRX3N_C
14
USB_SSRX4N_C
6
USB_SSRX3P_C
15
USB_SSRX4P_C
7
GND
16
GND
8
USB3TN3
17
USB3TN4
9
USB3TP3
18
USB3TP4

CN6: Audio Jacks Connector (MIC)
PIN
DEFINITION
5
MIC_L
4
GND
3
NC
2
MIC1_R
1
GND
CN7: Audio Jacks Connector (Line-Out)
PIN
DEFINITION
5
FRONT_
L
4
GND
3
N
C
2
FRONT_
R
1
GND
CN22: DC Adapter Power Input
PIN
DEFINITION
1
+VIN
2
+VIN
3
GND
4
GND
DC_JACK1: DC-IN
PIN DEFINITION PIN DEFINITION
1 GND 2 GND
3 +VIN 4 +VIN
CN10: LPC (Update BIOS)
PIN
DEFINITION
1
GND
2
INT_SERIRQ
3
3.3V
4
LPC_AD0
5
LPC_AD
1
6
LPC_AD
2
7
LPC_AD
3
8
L
PC_FRAME#
9
CHIP_PLTRST#
10
CLK
DP1: DISPLAY PORT
PIN
DEFINITION
PIN
DEFINITION
1
DPC_LANEP0
2
GND
3
DPC_LANE
N
0
4
DPC_LANEP1
5
GND
6
DPC_LANE
N
1
7
DPC_LANEP2
8
GND
9
DPC_LANE
N
2
1
0
DPC_LANEP3
11
GND
12
DPC_LANE
N
3
13
DDIC_DDC_AUX_SEL
14
GND
15
DPC_AUXP
16
GND
17
DPC_AUXN
18
DPC_DET
19
GND
20
DPC_PWR

DP2: DISPLAY PORT
PIN
DEFINITION
PIN
DEFINITION
1
DPD_LANEP0
2
GND
3
DPD_LANE
N
0
4
DPD_LANEP1
5
GND
6
DPD_LANE
N
1
7
DPD_LANEP2
8
GND
9
DPD_LANE
N
2
10
DPD_LANEP3
11
GND
12
DPD_LANE
N
3
13
DDID_DDC_AUX_SEL
14
GND
15
DDID_
AUXP
16
GND
17
DDID_
AUX
N
18
DPD_DET
19
GND
20
DPD_PWR
SIM_CARD1: SIM card socket
PIN
DEFINITION
1
VCC
2
RESET
3
CLOCK
4
GND
5
V
PP
6
DATA
DVI: DVI-D
PIN
DEFINITION
PIN
DEFINITION
1
TMDS Data2
-
13
NC
2
TMDS Data2+
14
+5V Power
3
GND
15
GND
4
NC
16
Hot Plug Detect
5
NC
17
TMDS Data0
-
6
DDC Clock
18
TMDS Data0+
7
DDC Data
19
GND
8
Analog VSYNC
20
NC
9
TMDS Data1
-
21
NC
10
TMDS Data1+
22
GND
11
GND
23
TMDS Clock+
12
NC
24
TMDS Clock
-
C1
NC
C2
NC
C3
NC
C4
NC
C5
DVI_
GND
C6
DVI_
GND
COM1: RS232/422/485 with 5V/12V selectable
PIN
DEFINITION
PIN
DEFINITION
1
DCD1#_OPTO
6
DSR1#_OPTO
2
RXD1_OPTO
7
RTS1#_OPTO
3
TDX1_OPTO
8
CTS1#_OPTO
4
DRT1#_OPTO
9
COM1P9SEL
5
GND
10
GND

JP4: COM1 5V/12V selection
PIN
DEFINITION
PIN
DEFINITION
1
RI1#_OPTO
2
COM1P9SEL
3
5V
4
COM1P9SEL
5
12V
6
COM1P9SEL
JP5: COM2 5V/12V selection
PIN
DEFINITION
PIN
DEFINITION
1
RI1#_OPTO
2
COM1P9SEL
3
5V
4
COM1P9SEL
5
12V
6
COM1P9SEL
COM2: RS232, with 5V/12V selectable
PIN
DEFINITION
1
5VS
2
GND
3
COM2P9SEL
4
DTR
-
5
CTS2
-
6
TXD2
-
7
RTS2
-
8
RXD
-
9
DSR
-
10
DCD
-
COM3/4: RS232
PIN
DEFINITION
1
5VS
2
GND
3
RI
-
4
DTR
-
5
CTS
-
6
TXD
-
7
RTS
-
8
RXD
-
9
DSR
-
10
DCD
-

LED1: LAN1 LED STATUS
LED1
Light
Dark
Flash
RED 1000M 100M NA
GREEN LINK UNLINK ACTIVITY
LED2: LAN2 LED STATUS
LED2
Light
Dark
Flash
RED 1000M 100M NA
GREEN Link Un-link Activity
LED3: POWER/HDD LED
LED2
Light
Dark
Flash
RED NA HDD un-access HDD access
GREEN Power On Power Off NA
SW1: POWER BUTTON
PIN DEFINITION
ON NO LIGHT
OFF BLUE LIGHT
FP1: Front Panel
PIN
DEFINITION
PIN
DEFINITION
1
HDLED+
2
PLED+
3
HDLED
-
4
GND
5
GND
6
EC_PWR
_
B
TN
7
EXT_RESET#
8
GND
9
NC
10
NC

FP2: LAN LED
PIN
DEFINITION
PIN
DEFINITION
1
3V3M
2
3V3M
3
LAN_LED_LNK#_ACT
4
LAN2_ACT#
5
LAN_LED_LNK_1000#
6
LAN2_LED_1000
-
7
LAN_LED_LNK_100#
8
LAN2_LED_100
-
Plug LED cable to FP2 pin header
Active LED: plug 1-3 pin
Single 1000M LED: plug 1-5 pin
Single 100M LED: plug 1-7 pin
Dual 1000M LED: plug 5-7 pin