Pericom PA10W-N1 User manual

1
Safety Precautions
Both the installer and the operator of the Android panel PC must read and
understand this installation manual carefully before installing and operating the
device.
Only qualified personnel may install or operate the device.
The device must be installed according to the installation instructions.
The device is designed for the installation on a flat surface under the following
conditions:
•No extreme high and low working temperatures
•no high explosive risks
•no strong magnetic fields
•no high polluting risks
Never allow fluids, metal filings or wiring debris to enter any ventilation
openings in device. This could cause fire or electrical shock.
Don’t cover the openings as they are for air convection hence protects the
equipment from overheating.
Don’t store the device in an environment where the temperature is
lower/higher than recommended in this manual as it may damage the device.
Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet.
The LCD display liquid contains a powerful irritant. In case of skin contact, wash
immediately with plenty of water. In case of eye contact, hold the eye open,
flush with plenty of water and get medical attention.
The supplier is not responsible for modified, altered or reconstructed
equipment.
The figures in this manual serve an illustrative purpose. Because of the many
variables associated with any particular installation, the supplier cannot
assume responsibility for actual use based on the figures.
The supplier neither guarantees that the device is suitable for your particular
application, nor assumes responsibility for your product design, installation or
operation.
2
Product Specification
2.1
Product Specification (Wide Screen Model)
Model
PA10W-N1
PA11W-N1
PA15W-R1
PA17W-R1
PA22W-R1
Type
10.1" TFT
11.6" TFT
15.6" TFT
17.3" TFT
21.5" TFT
Resolution
1280x800
1920x1080
1920x1080
1920x1080
1920x1080
Brightness
300 cd/m2
300 cd/m2
300 cd/m2
400 cd/m2
250 cd/m2
Backlight
Lifetime
50,000 hr
50,000 hr
50,000 hr
50,000 hr
50,000 hr
CPU
Quad-core A53
Dual-core A72 + Quad-core A53
RAM/Storage
2G/8G
4G/32G (max. 64G)
Touch Screen
Projected Capacitive Touch
COMs
2 x RS232 (422/485 option)
Ethernet
1 x GbE RJ-45
USB
2 x USB 2.0, 1 x OTG
Wireless
WIFI 2.4/5G and Bluetooth BT 4.0, GPS (option)
Memory Card
MicroSD
Audio
1 x Audio Out, 2 x Speaker
Video Output
1 x HDMI 1080P@60fps
1 x HDMI 1080P@60fps or 4K@60fps
Power Input &
Consumption
12~24V, max. 35 watts
Weight
1.7 Kgs
2.8 Kgs
3.7 Kgs
4.2 Kgs
5.7 Kgs
Operating
Temp.
-10~60℃
Storage Temp.
-20~80℃
Moisture
10% ~ 80% @40°C
Construction
Silver Aluminum front bezel and chassis (Black as option)
IP Rating
IP65 (Front)
Mounting
Panel mount, VESA 75x75 / 100 x 100
Dimension(mm)
(WxHxD)
283.7x
186.2x56
328.3x
216.3x56
405.3x
254.7x68
452.0x
285.0x67
537.4x
328.8x63
Cut-out(mm)
(WxH)
269.7x172.2
314.3x202.3
391.3x240.6
435.0x268.0
523.4x314.8
CE/FCC
EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3
System Support
Android 6.0
Android 7.1

2.2
Product Specification (Standard 4:3 Screen Model)
Model
PA10S-N1
PA12S-R1
PA15S-R1
PA17S-R1
PA19S-R1
Type
10.4" TFT
12" TFT
15" TFT
17" TFT
19" TFT
Resolution
1024x768
1024x768
1024x768
1280x1024
1280x1024
Brightness
350 cd/m2
450 cd/m2
450 cd/m2
350 cd/m2
250 cd/m2
Backlight
Lifetime
50,000 hr
50,000 hr
50,000 hr
50,000 hr
50,000 hr
CPU
Quad-core
A53
Dual-core A72 + Quad-core A53
RAM/Storage
2G/8G
4G/32G (max. 64G)
Touch Screen
Projected Capacitive Touch
COMs
2 x RS232 (422/485 option)
Ethernet
1 x GbE RJ-45
USB
2 x USB 2.0, 1 x OTG
Wireless
WIFI 2.4/5G and Bluetooth BT 4.0, GPS (option)
Memory Card
MicroSD
Audio
1 x Audio Out, 2 x Speaker
Video Output
1 x HDMI
1080P
1 x HDMI 1080P@60fps or 4K@60Hz
Power Input &
Consumption
12~24V, Max. 35 watts
Weight
TBD
2.8 Kgs
3.7 Kgs
4.2 Kgs
5.6 Kgs
Operating
Temp.
-10~60℃
Storage Temp.
-20~80℃
Moisture
10% ~ 80% @40°C
Construction
Silver Aluminum front bezel and chassis
IP Rating
IP65 (Front)
Mounting
Panel mount, VESA 75x75 / 100 x 100
Dimension(mm)
(WxHxD)
283.9x
231.3x56
312.3x
250.8x60
366.1x
290.0x62
399.2x
331.6x63
438.6x
363.6x63
Cut-out(mm)
(WxH)
267.9x215.3
298.3x236.8
352.1x276.0
385.2x317.6
424.6x349.6
CE/FCC
EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3
System Support
Android 6.0
Android 7.1
2.3
Mechanic & Interface Description
Top
Back
Bottom
Less than 12”
12”& Above

2.4
Communication Ports
COM1 and COM2, 9-pin male connectors, are used to connect the device to
a controller via RS232 or RS485.
RS-232 DB-9 male connector
PIN
Assignment
1
2
RxD
3
TxD
4
5
GND
6
7
8
9
5V Out (≤0.25A)
3
Installation
3.1
Mounting the Device
Cut out the mounted panel to match the dimensions (mm) according to the
size of the device.
Model
Cut-out
W
H
PA10W
269.7
172.2
PA11W
314.3
202.3
PA15W
391.3
240.6
PA17W
435.0
268.0
PA22W
523.4
314.8
PA10S
267.9
215.3
PA12S
298.3
236.8
PA15S
352.1
276.0
PA17S
385.2
317.6
PA19S
424.6
349.6

4
Power Connection
4.1
Power Source
The device is equipped with a 12~24 V DC input. Supply power other than
12~24 VDC ± 15% will severely damage the unit. Thus, check the power
supply supporting the DC power regularly.
4.2
Remove the terminal block
1. Loosen the two screws that secure the terminal block.
2. Gently pull the terminal block away from the connector
4.3
Connect the terminal block
1. Verify that the terminal block is not connected to a power source.
2. Secure the DC power wires to the terminal block. Follow the markings
on terminal blocks and power connector for proper connections.
4.4
Install the terminal block
1. Reattach the terminal block to the connector until seated.
2. Tighten the two screws that secure the terminal block to the power
connector
4.5
Power on the device
1. Long press the “Power Button”on the back for at least 3 seconds
2. The Android logo screen will be displayed and the system will be
started
3. Once Android system is ready, the Android desktop will be displayed
4.6
Power off the device
To power off the device, press the “Power Button”on the back of the device
or press the “Power Off”icon on the navigation of the screen
5
General Navigation of Android Device
At the bottom of your device’s screen, you’ll find the navigation bar with
these seven buttons:
Hide Bar
Press to hide the Navigation Bar. Swipe up from the bottom
of the screen to show the Navigation Bar.
Volume Down
Turn the speaker volume down
Back
Open the previous screen you were working in, even if it was
in a different app. Once you back up to the Home screen,
you can’t go back any further.
Home
Returns to the Home screen.
Overview
Opens a list of thumbnail images of screens you’ve worked
with recently. To open one, touch it. To remove a screen
from the list, swipe it left or right or touch the X.
Volume Up
Turn the speaker volume up
Power Off
Power off or reboot the device