Pet Gear SPORTSTER PG8200 User manual

INSTRUCTION MANUAL
SPORTSTER
Pet Stroller
PG8200
To see our full line of products, visit us online at: www.petgearinc.com
CUSTOMER SERVICE HELP DESK
[email protected]
Toll-Free 877-752-9123 - Eastern Standard Time 8am-3pm, Monday through Friday
For Pets
Only
Interior Dimensions:
26L x 12W x 19.5H
For The ON-THE-GO Pet™

SPORTSTER Pet Stroller PG8200
PARTS LIST
2
Check that you have all the parts shown BEFORE assembling your product.
If any parts are missing, call Customer Service. No tools required.
• Do not carry additional bags, goods, or accessories in or on stroller except as recommended
in the manufacturer’s instructions.
• Recommended use of an approved safety restraint correctly fitted and adjusted.
• Do not leave pet unsupervised in stroller.
• Before making adjustments to stroller ensure that pet’s body is clear of any moving parts.
•This stroller is designed for one pet only.
• Do not hang bags from handles as this may cause the product to become unstable.
• Do not use on escalator or stairs; fold stroller and carry.
• Put on brake whenever you park the stroller.
• Ensure stroller is completely erected and check that all locks are engaged before placing
pet in stroller.
• Do not overload as stroller may become unstable; maximum weight of pet using this stroller
not to exceed 45 lbs.
• Any goods carried in the basket not to exceed 6 lbs.
WARNING!
FOR PETS ONLY.
Not intended to be used as a restraining device for aggressive or dangerous animals that dig,
chew or paw aggressively. Do not leave your pet unattended. PET GEAR is not liable for any damage
caused by aggressive, destructive, immature or untrained animals.
Do not use near an open or exposed
flame. Failure to follow these warnings and the instructions could result in serious injury or death.
Stroller Frame Washers (2)
Rear Wheels (2) Rear Axel Assembly
Cotter Pins (2) Hub Cap
Front Wheel Assembly
Back Tray

SPORTSTER Pet Stroller PG8200
OPENING THE STROLLER
TO ASSEMBLE FRONT WHEELS
3
Step 1. Turn stroller over as shown.
Step 2. Push wheel assembly onto stroller leg until it
snaps into place.
NOTE: To remove, squeeze tab and pull wheel off.
Note Direction
of Arrow
Step 1. Release locking latch.
Step 2. Unfold as shown. Make sure both
locks snap into place.

4SPORTSTER Pet Stroller PG8200
ASSEMBLING REAR WHEELS TO AXLE
ASSEMBLING REAR AXLE TO FRAME
4
Step 1. Slide wheel assembly onto axle.
Step 2. Slide washer onto axle.
Step 3. Fit straight part of cotter pin through
hole on axle.
Step 4. Line up each of the tabs in the hub
cap with the slots in the wheel, snap hub cap
into place.
Step 5. Fit cover to collet by firmly pressing
the cover into place.
Step 6. Push wheel hub cap onto the wheel
hub and make sure that the securing lugs
correctly locate into mating slots in wheel hub.
Step 7. Repeat for other side.
Step 1. Turn stroller over.
Step 2. Position rear axle assembly as shown.
Step 3. Push rear axle onto frame until it clicks and
locks into place on both sides.
NOTE: Pull down firmly on the brackets to be sure
they are securely attached to the stroller’s rear legs.

TO ASSEMBLE BACK TRAY
SPORTSTER Pet Stroller PG8200
Arrows indicate location of bolts on stroller.
Step 1. To assemble the back tray, first align a hole
on one side of the tray with one of the bolts on the
handle of the same side of the stroller.
Step 2. Snap one side of the tray over the bolt on
the handle then repeat for the other side.
TO USE FRONT WHEEL LOCKING MECHANISM
Step 1. To engage the front wheel locking
mechanism so that the front wheel does not
swivel, (best when the stroller is used for
fast walking or running), pull tab up.
Step 2. To disengage the locking
mechanism so that the front wheel swivels
(for easy steering) push tab down.
TO LOCK:
Pull tab up.
TO UNLOCK:
Push tab down.
APPLYING THE BRAKES
UNLOCK
LOCK
5
Step 1. Push levers on both rear wheels down to lock.
Step 2. Pull levers up to unlock.
WARNING: Never leave your stroller parked without
applying brakes.

6
•Always store product in a clean, dry place.
• Not recommended for use on the beach.
• Do not put heavy items on top of the stroller.
•Clean frame by wiping with a lightly oiled cloth.
• Do not use detergent or abrasives. Spot clean fabric with dry cleaning fluid or mild soap and warm water.
•To ensure easy maneuverability and to minimize wear and tear, (especially wheels, axles, and swivels),
keep all moving parts clean and lubricated with WD40® or light machine oil.
• NOTE: Do not lubricate brake components or swivel locks.
• Regularly check stroller for loose parts. These should be tightened or replaced.
LOOKING AFTER YOUR STROLLER
•To clean and lubricate front and rear wheels, push out locking lever under wheel housing
to release rear wheel.
•To ensure ease of maneuverability and to minimize wear and tear, keep all moving parts
clean and lubricated with WD40® or light machine oil.
•Push wheel sets back on until they click and lock in position; pull on wheel housings to
ensure they are secure.
•Push stroller back and forth and rotate swivels around to work in lubricant.
•Clean the rear wheel assembly and the rest of the frame with warm, soapy water; clean
off with warm water and dry thoroughly.
•NOTE: Do not lubricate brake components or swivel locks.
WHEEL MAINTENANCE
FOLDING STROLLER
Before folding the stroller close the canopy and unzip
stroller. Slide second frame lock release (H) to the right,
while squeezing the main frame lock release (G) rotate
the folding mechanism almost 180 degrees forward
untill stroller releases and handle is lowered to the rear
wheels. When closed, push folding lock (B) onto catch.
Step 1. Before folding the stroller, close the canopy
and unzip stroller.
Step 2. Slide second frame lock release (A) to the
right, while squeezing the main frame lock release
(B) rotate the folding mechanism almost 180
degrees forward until stroller releases and handle is
lowered to the rear wheels.
Step 3. When closed, push folding lock onto catch.
SPORTSTER Pet Stroller PG8200
A
B

7
SPORTSTER Pet Stroller PG8200
REPLACEMENT PARTS
Please have your model number ready before calling. Use only PET GEAR replacement parts.
For Pets
Up To
45 lbs
PO Box 99
West Rutland, VT 05777
877-752-9123
www.petgearinc.com