PHENYX PRO PDP-1 Series User manual

Table of Contents
SYSTEM DESCRIPTION
System Description..................1
System overview
Operation Guidance................................................................................4
WirelessTips............................................................................................4
Troubleshooting......................................................................................5
Specification............................................................................................6
Technical Support & Warranty Information..........................................7
System overview....................1
System features.....................1
System components..............1
Receiver
Accessories
PWR-P1
PWR-P2
Single wireless rechargeable receiver
Dual wireless rechargeable receiver
Transmitters
PWH-P
PWB-P
Handheld transmitter
Bodypack transmitter
1HM1LM-BLK Black headset & lapel mic combo
Angle TS male to 1/4’’ TS female adapter
6.35mm to 3.5mm adapter
USB-C charging cable
Microphone foam cover
AA batteries
User’s manual
Phenyx Pro always adheres to the mission of inspiring people to achieve next-level sound performance and exploring
better tenchniques to enhance the wireless experience. The PDP-1/2 series is our new digital soultion that balances
convenience and professionalism. With adjustable UHF frequency design, it boasts advanced digital circuitry for
noise immunity and delivers stellar sound for small-scale indoor and outdoor performances. This is a go-to audio
solution for weddings, church sermons, karaoke, broadcast, meetings, etc.
System features
System component
48kHz/24Bit UHF digital circuitry transmits encrypted signals to avoid signal crosstalk and deliver pure fidelity sound.
Tunable frequency design makes the system fearless to interference.
(US version has 15 frequencies for each transmitter. EU version has 5 frequencies for each transmitter.)
The dynamic cardioid microphone delivers stable performance.
Rock-firm wireless coverage is up to 200ft without interference.
Transmitter mute function for your convenience and safety.
Plug-and-go hookup. One-tap frequency selection from the transmitter.
Available to link up several units simultaneously.
The portable receiver and bodypack transmitter with the universal USB Type-C charging port offers ultimate
convenience and fast charging.
1500mAh battery of receiver and 550mAh battery of bodypack transmitter for long-lasting battery life.
The whole system is durable-metal built with elegant silver color.
Functions of Parts....................2
Receiver.................................2
Transmitters...........................3
Step 1: Power up and pair up the receiver and transmitters................4
Step 2: Link up with the sound system.................................................4
1
Thank you for purchasing the Phenyx Pro PDP-1/2 Series.
For the best results and the utmost satisfaction for your new unit,
please read this manual carefully to ensure proper operation,
and keep it for future reference. For more information,
please visit our store: www.phenyxpro.com

2
① Power/Pair button: Long press this button for 2 seconds to turn on/off the receiver, and tap it to initiate synchronization
with the transmitter.
② USB-C port: The USB-C charging port for the receiver.
③ Antenna: For better signal reception, please keep it upward while using.
④ Battery indicator: It doesn't light up when the receiver is turned on with enough battery. And it will turn red and flash
quickly when the receiver is in the low battery status. While charging, the indicator will stay red; then, it will turn off
when the receiver is fully charged.
⑤ RF indicator: It stays on, indicating the receiver is receiving signals. When it flashes slowly, the receiver is not paired
up with the transmitter; while flashing quickly, the receiver and transmitter are successfully synced.
*NOTE: If you want to verify whether the second transmitter of the PDP-2 is synced, please make sure both transmitters are in different
channels and that the RF indicator flashes quickly and then stays on when you turn on each one. Also, you'd better do a soundcheck
for both transmitters to confirm the successful synchronization.
⑥ 6.35mm TS connector: It is compatible with the 6.35mm TS jack of an audio mixer, amplifier or other devices to output
the audio signal received from the transmitter.
PWR-P1/2
The PWR-P1 receives the signal from only one transmitter, which should be in CHA. It can not receives the signal
from a transmitter in CHB.
The PWR-P2 can receive signals from two transmitters which should be in CHA and CHB.

Transmitters
Handhled transmitter
PWH-P
Bodypack transmitter
PWB-P
②
④
①
⑥
⑧
⑤④
⑤
⑥
⑦
③
⑩
⑨
CH:B
CH
*NOTE: Please make sure the sound source is toward the capsule.
①Microphone capsule
*NOTE: For handheld mic, tap this button to mute the mic. The LCD screen flashes when the transmitter is muted.
②Bodypack antenna
③Mini 3-pin XLR jack: Connect a headset/lapel microhone.
④LCD display: It shows real-time battery indicator, frequency number and channel number. The screen shows “----”
when the transmitter is stand by.
⑤Power button: Long press this button for 2 seconds to turn on/off the transmitter.
*NOTE: For the detailed frequency, please check it on the frequency list on page 6.
⑥CH button: Tap this button to adjust the channel frequency.
*NOTE: It doesn’t light up when the bodypack isn’t charged to the USB-C charger.
⑦Mute button: Tap this button to mute the bodypack. The LCD screen flashes when the transmitter is muted.
⑧Battery compartment: Install AA batteries with the correct polarity to charge the handheld mic.
⑨USB-C port: The USB-C charging port for the bodypack transmitter.
⑩Power indicator: It lights red when the bodypack transmitter is charging and turns blue when fully charged.
3

OPERATION GUIDANCE
CH:B
CH
*NOTE: The LCD screen of the transmitter shows “----” in standby mode.
Step 1: Power up and pair up the receiver and transmitters
①Make sure the receiver is fully charged before using it.
②Long press the power button of the receiver for 2 seconds to turn it on.
③For the handheld mic, unscrew the battery cover of the transmitter and install fresh batteries with the correct polarity.
For the bodypack transmitter, make sure it is fully charged.
④Long press the power button of the transmitter for 2 seconds to turn it on.
*NOTE: A frequency accommodates only one wireless channel. Please ensure that the frequencies
of each transmitter are different from each other.
⑤Tap the CH button of the transmitter to select the desired frequency.
⑥Tap the power/pair button of the receiver to pair it up with the transmitter.
⑦Check the indicators of the receiver to ensure effective synchronication.
⑧When pairing up the second transmitter for the PDP-2 system, please make sure to select a different frequency from
the first one and follow the procedures above.
4

TROUBLESHOOTING
*NOTE: The PWR-P1 receiver only has CHA to operate, while the
PWR-P2 have CHA and CHB.
*NOTE: The LCD screen would show “U272” (for the handheld mic) or
“U291” (for the bodypack) before the channel number is switched.
*NOTE: Please initiate the channel switch function only when
necessary.
The original system is automatically paired up before
delivery. But if you need to pair up a transmitter to the
receiver, please follow the below steps.
Check if the new transmitter is in the channel (A or B)
you would like to replace. Otherwise, switch its channel
to CHA or CHB
Make sure the receiver and any other transmitters are off.
Turn off the transmitter you desired to pair it up. Long
press the power button and CH button together for about
4 seconds until the screen shows “CH00”.
Turn on the receiver and the RF indicator flashes slowly.
Wait for 2 seconds and then tap the CH button. If the RF
indicator stays on, the transmitter is successfully synced.
Turn on the transmitter you desire to switch channel. Long
press the power button and CH button together for about
5 seconds to switch CHA to CHB or vice versa.
After the channel switch process, you have to pair up the
transmitter with the receiver for operation.
Make sure the receiver and any other transmitters are off.
5

SPECIFICATION
PWR-P1/2 Wireless Receiver
PWH-P Handheld Transmitter
PWR-P Bodypack Transmitter
Headset/lapel mic type
Polar pattern
Frequency response
Output impedance
Sample rate
Bit rate
THD+N
Charging interface
Charging time
Working time
Condenser
Omni
Headset mic: -36dB (±2dB)
Lapel mic: -30dB (±2dB)
96dB
110Hz-18kHz
2.2kΩ
48kHz
24bit
0.1%
USB-C
About 2h
About 5.5h
1500mAh
S/N ratio
Sensitivity
6

7