Philio PSC01 Operating and maintenance instructions

Philio Technology Corporation
www.philio-tech.com
Quick Installation Manual
PSC01 Z-Wave IP Gateway
PSE02 Multi Sound Siren
PST02 4 in 1 sensor
PAN11 Plug with Power Meter
Smart Home Kit

Z-Wave IP Gateway
PSC01 the Z-Wave IP Gateway
can be connected wireless or
wired to the Internet and
wirelessly connects all of your
sensors so that you can receive
notifications via mobile
devices and also control
different smart devices in your
home or office.

Know your Gateway
Here are the A.B.C.D. you need to know about PSC01.
5Vdc Power
USB slot
A. Front
White light LED for the Internet
indications
Lens : logo B. Connections

Know your Gateway
C. Green Lights LED
indications
Green LEDs indications
1. WiFi
2. Ethernet
3. Internet
4. Z-Wave
5. Power

Know your Gateway
WPS
holder
D.
Back
Reset
RJ45
Tamper
Switch

Installation 1 2 3
1. Download the APP
Search “Z-Wave Home Mate”
Or Scan QR Code below

Installation 12 3
2.1 Connect PSC01 to the Router by Ethernet
cable
Ethernet
5Vdc Power
Router
PSC01
Note: when the network is built, LED light 2 on the side will flash.

Installation 12 3
2.2 Connect PSC01 to the Router by
WPS
5Vdc Power
PSC01
Press the WPS button on the
Router and PSC01
And it will build a network
connection within 120 seconds.
Note: the white light LED will flash when WPS is making a connection.

Add the Gateway Main page
Installation 1 2 3
3. Add the Gateway and access the main
page

Add Gateway
Gateway Setting
To fill up UID/ IP Address: Select
either “QR Code” or “LAN
Search” to locate your Gateway
888888
Customize gateway
The default password is
“888888”