Philips INFRACARE HP3643 User manual

ServiceManual
Philips Consumer Lifestyle
Published by Philips Consumer Lifestyle Printed in the Netherlands © Copyright reserved Subject to modification
Infra Care
HP3643
09/10
PRODUCT INFORMATION
- Product meets the requirements regarding interference
suppression on radio and television.
- After the product has been repaired, it should function
properly and has to meet the safety requirements as laid
down officially established at this moment.
TECHNICAL INFORMATION
- Input voltage : 220 - 230 V / 50 - 60 Hz
: 220 V / 50 Hz
: 220 V / 60 Hz
: 110 V / 60 Hz
- Input consumption : Approx. 650 W
- IR source : Sylvania IR 650 W / 230 V
: Sylvania IR 650 W / 115 V
- Timer : 15 minutes
- Weight : 7,9 kg
L
N
ASO switch
15 min.
IR lamp
TCO
M

HP3643
2-3
DISASSEMBLY- AND RE-ASSEMBLY ADVISE
How to exchange a lamp and/or switch
- Undo and remove the 8 screws at the back of the lamp
housing.
- The lamp holders and the switch are now accessible.
Exchanging the lamp:
- Unscrew the lamp holder at one end and let the lamp slide
out of the housing between the reflector and the glass pane.
- Put the reflector with the glass pane in vertical position, i.e.
with its narrow end pointing downwards, and slip the lamp
through the opening next to the lamp holder. Make sure
the contact point of the lamp rests properly on the contact
point of the lower lamp holder.
- Tighten the lamp holder and make sure the contact points
are seated properly.
REPAIR INSTRUCTION
To replace the filter:
1. Open the device.
Be aware you keep the wiring in place.
2. Unscrew one lamp holder.
3. Lift up the lamp out of the reflector.
4. Remove the other lamp holder and unplug the wires.
5. Replace the whole reflector unit.
OPTIONAL (accessories)
- No specific issues.

HP3643
3-3
EXPLODED VIEW & PARTS LIST
1
2
3
Pos Service code Description
1
2
3
4222 062 97030
4222 062 97040
4222 062 97050
4222 062 97060
4222 062 97070
4222 036 17440
Sylvania lamp IR 230 V
Sylvania lamp IR 115 V
Switch 230 V / 50 Hz
Switch 230 V / 60 Hz
Switch 110 V / 60 Hz
Filter