Philips 2000i Series User manual

How many phones can connect to my Philips Air Purifier?
Find out here how many smartphones can be connected to your Philips Air Purifier and how the
settings work in the case of multiple users.
Amount of phones that can be connected to one Air Purifier
You can connect a maximum of 6 apps to one Philips Air Purifier.
More than one user choosing settings
If more than one connected person chooses settings, your Philips Air Purifier will follow the
settings chosen by the last user.
Wi-Fi networks compatible with Philips Connected Purifier
Discover here which Wi-Fi networks can be used with the Connected Purifier.
Wi-Fi networks compatible with the Connected Purifier
• The Connected Purifier is compatible with 802.11 b/g/n networks (2.4 GHz).
• It is NOT compatible with 802.11 ac (5 GHz) network.
• Web authentication networks are not supported.
• If the router your purifier is connected to is dual-band and it is currently not connecting to a
2.4 GHz network, please switch to another band (2.4 GHz) of the same router and try to pair
your purifier again. 5 GHz networks are not supported.
How many Philips Air Purifiers can connect to a smartphone?
Find out here how many Philips Air Purifiers can connect to the same smartphone.
Amount of Air Purifiers that can connect to one phone
You can connect up to 20 Philips Air Purifiers to the same smartphone.
What do the codes on my Philips Air Purifier mean?
Your Philips Air Purifier gives you reassurance by displaying indoor air quality codes in real
time. Discover what the codes mean.
Meanings of codes in Philips Air Purifiers

Depending on the Air Purifier model you have, you might see one or more of the following
indicators or codes:
Code: A
Auto mode
Code: C
Gas mode (AC3254 and AC3256 only)
Code: L
Child lock on
Code: UL
Child lock off
Code: F0
Clean the pre-filter
Code: A0 to A9
Replace NanoProtect S3 HEPA filter
Code C0 to C9:
Replace NanoProtect S3 AC filter
Code SL
Sleep Mode
Code 1h:
Timer mode
Code t:
Turbo Mode.
Error Code: Er
The hall sensor is not working properly. Remove and then reattach the front panel If the
error code "Er" still persists, we recommend that you contact us.
Error code: E1 to E4
Should I reset my Philips Air Purifier or Humidifier after replacing a filter?
Your Philips Air Purifier or Humidifier needs to be reset after each filter replacement.
This is done to activate the counting system for the new filter(s).
Also, your air purifier/humidifier is equipped with a filter replacement alert. It warns you
when the filter needs to be cleaned (pre-filter only) and replaced.
If you do not reset the air purifier or humidifier after replacing a new filter, the appliance
will alert you to replace a filter.
Can I clean the filters and pre-filter of my Philips Air Purifier?
You can clean or wash the pre-filter (indicated as C in the image below).
The other filters (indicated as A and B in the image below) cannot be washed: they need
to be replaced. Please check your user manual to see replacement indications specific for
your model.


What filters should I use with my Philips Air Purifier?
If you are wondering which filters to use with your Philips Air Purifier, please see if there is an
answer to your questions below.
Philips Air Purifier filters
Your Philips Air Purifier comes with multiple filters and will warn you when a filter must be
replaced. When one of the filters is almost full and needs to be cleaned or replaced, the
appropriate filter replacement light starts to flash to prompt you to replace that filter. That is how
you will know which filter to replace.
Please find what filter applies to your Philips Air Purifier here
Depending on the Air Purifier you have, you might see different types of filter replacement alert
lights:
A) Purifiers AC400x, AC401x, AC402x, AC407x, AC408x, ACP073x, ACP077x, ACP007x:
:
Filter replacement light 1
Filter replacement light 2
Filter replacement light 3/4
Filter replacement light 5
See further explanations below.
B) All other purifiers:
Purifiers that do not feature in the list above will show a filter replacement alert light or an error
code (models with a display panel).
See further explanations below.
A) Purifiers AC400x, AC401x, AC402x, AC407x, AC408x, ACP073x, ACP077x, ACP007x:

If filter replacement light 1 flashes (in red)
The pre-filter needs to be cleaned. You can wash it under a running tap and dry it completely it
before reinstalling it. Alternatively, you can clean it using a vacuum cleaner.
If filter replacement light 2 is on or flashing (in red)
If filter replacement light 2 is flashing or is on continuously, you need to replace the multi-care
filter (for Air purifier AC4004 only). This filter cannot be washed. After replacing, make sure
you reset your appliance
Filter replacement light 3/4 is on (in red)
The filter 3 (activated carbon filter) and filter 4 (HEPA filter) need to be replaced. After
replacing them, make sure you reset your purifier. Please note that these filters cannot be
washed.
Filter replacement light 5 is flashing (in red)
This light indicates that the humidification filter should be replaced.
B) All other purifiers
In this case (and for models without a display screen), your Philips Air Purifier features a filter
replacement light. This light will stay on and will be coloured red.
If your purifier has a display screen, then it will show one of the following error codes:
Codes A1 to A9:
Replace NanoProtect S3 HEPA filter.
Codes C1 to C9:
Replace NanoProtect S3 AC filter.
Code: F0
Clean the Pre-filter.
What is the CADR specification in my Philips Air Purifier?
If you would like to know what the CADR specification mentioned in your Philips Air Purifier's
package or leaflet is, read about it here.
What is CADR?
CADR stands for Clean Air Delivery Rate.
It indicates the volume of filtered air delivered by your Philips Air Purifier. Your Air Purifier
will run faster when the amount of particles, tobacco smoke, pollen and dust increases.
What does the PM2.5 indicator in my Philips Air Purifier mean?

PM2.5 is a scale for measuring real-time air quality. Its values vary from 0 to 500.
The PM2.5 indication is connected to your Philips Purifier's air quality ring light to inform you
in real time about the quality of the ambient air.
The different colours indicate the following:
Blue: good.
Blue-Violet: fair
Red-Purple: unhealthy
Red: very unhealthy
What do my Philips Air Purifier's lights mean
If you're wondering what the air quality lights or ring lights of your Philips Air Purifier mean,
please find out here.
Note: All images shown below are generic representations only; there can be some differences
among specific appliances.
Air purifiers with air quality ring lights
You can see the quality of air your Philips Air Purifier is cleaning using the air quality lights (see
image below). The different colours indicate the following:
Blue: good
Blue-violet: fair
Red-Purple: unhealthy
Red: very unhealthy
The following table contains further details for each colour. The second column for Thailand,
Indonesia and India is based on the Chinese standard. The third column is only for India and takes
effect from week 30, year 2020:
IAI
(Allergen
levels)
PM2.5 for ACxxxx/20;
(Standard for fine
particulate matter)
For
Thailand,
Indonesia,
India, it is
based on
the
Chinese
standard
India
(effective
date:
YYWW：
2030)
1
1~12
1~20

2
13~23
21~40
3
24~35
41~60
4
36~48
61~80
5
49~61
81~100
6
62~75
101~120
7
76~87
121~160
8
88~101
161~200
9
102~115
201~250
10
116~132
251~300
11
133~150
301~350
12
151~500
350~500
To check which standard your air purifier uses, see the image below. If the number is 2030 (year
2020, week 30) or higher, the air purifier uses the new Indian standard. If the number is below 2030,
for example 1842, it uses the Chinese standard.
Air purifiers with a quality light
In this case, your air purifier indicates the current quality of the air by displaying a red or green
light.
In the first few minutes after you select the SmartAir Control function, the air quality indicator
will flash red to indicate that the air quality sensor is measuring the ambient air quality. After
approximately 5 minutes, the air quality indicator lights up green if the air quality is good or
lights up red if the air quality is poor.
Note: The SmartAir Control function is only applicable for purifiers AC406x. For these
purifiers, this function automatically adjusts speed settings according to the current air quality.
The information on this page applies to the following models: AC0820/30, AC1214/60,
AC3829/60. more