Philips AC2887/10 User manual

1
B
A
C
ED F
G
2
H J K M NL PO QI
AC2887
I N OH J MK L AC2882
AC2887
AC2882
© 2016 Koninklijke Philips N.V.
All rights reserved
Always there to help you
Register your product and get support from
Question?
Contact
Philips
www.philips.com/welcome
4241 210 87501
EN User manual 1
CS Příručka pro uživatele 17
HU Felhasználói kézikönyv 32
PL Instrukcja obsługi 49
RO Manual de utilizare 67
SK Príručka užívateľa 84
UK Посібник користувача 101

3s
3s 3s
3s
3s
3s
3
11
7
15
19
5
13
9
17
21
6
14
10
18
22
4
12
8
16
20
23
31
27
25
29
33
26
30
34
24
28
32

1EN
English
Contents
1 Important 2
Safety 2
2 Your air purier 5
Product overview (g.a) 5
Controls overview (g.b) 5
3 Getting started 6
Installing lters 6
4 Using the appliance 6
Understanding the air quality light 6
Switching on and o 6
Changing the Auto mode setting 7
Changing the fan speed 7
Setting the timer 8
Using the light on/o function 8
5 Cleaning 9
Cleaning schedule 9
Cleaning the body of the
appliance 9
Cleaning the air quality sensor 9
Cleaning the pre-lter (g.v) 10
6 Replacing the lter 11
Understanding the healthy air
protect lock 11
Replacing the lters (g.y) 11
Filter force reset 11
Filter type change 12
7 Troubleshooting 13
8 Guarantee and service 15
Order parts or accessories 15
9 Notices 15
Electromagnetic elds (EMF) 15
Recycling 16

2EN
1 Important
Safety
Read this user manual carefully before
you use the appliance, and save it for
future reference.
Danger
• Do not let water or any
other liquid or flammable
detergent enter the
appliance to avoid electric
shock and/or a fire
hazard.
• Do not clean the
appliance with water,
any other liquid, or a
(flammable) detergent to
avoid electric shock and/
or a fire hazard.
• Do not spray any
flammable materials
such as insecticides or
fragrance around the
appliance.
Warning
• Check if the voltage
indicated on the
appliance corresponds to
the local power voltage
before you connect the
appliance.
• If the power cord is
damaged, you must have
it replaced by Philips, a
service center authorized
by Philips, or similarly
qualified persons in order
to avoid a hazard.
• Do not use the appliance
if the plug, the power
cord, or the appliance
itself is damaged.
• This appliance can be
used by children aged
from 8 years and above
and persons with reduced
physical, sensory or
mental capabilities or
lack of experience and
knowledge if they have
been given supervision or
instruction concerning use
of the appliance in a safe
way and understand the
hazards involved. Child
shall not play with the
appliance. Cleaning and
maintenance shall not be
made by children without
supervision.
• Do not block the air inlet
and outlet, e.g. by placing
items on the air outlet or
in front of the air inlet.

3EN
English
• Make sure that foreign
objects do not fall into the
appliance through the air
outlet.
Caution
• This appliance is not
a substitute for proper
ventilation, regular
vacuum cleaning, or use
of an extractor hood or
fan while cooking.
• If the power socket used
to power the appliance
has poor connections,
the plug of the appliance
becomes hot. Make
sure that you plug the
appliance into a properly
connected power socket.
• Always place and use the
appliance on a dry, stable,
level, and horizontal
surface.
• Leave at least 20cm free
space behind and on both
sides of the appliance
and leave at least 30cm
free space above the
appliance.
• Do not place anything on
top of the appliance.
• Do not sit or stand on
the appliance. Sitting or
standing on the appliance
may lead to potential
injuiry.
• Do not place the
appliance directly below
an air conditioner to
prevent condensation
from dripping onto the
appliance.
• Make sure all filters
are properly installed
before you switch on the
appliance.
• Only use the original
Philips filters specially
intended for this
appliance. Do not use any
other filters.
• Combustion of the filter
may cause inreversible
human hazard and/or
jeopardize other lives. Do
not use the filter as fuel or
for similar purpose.
• Avoid knocking against
the appliance (the air inlet
and outlet in particular)
with hard objects.
• Always lift or move the
appliance by the handle
on back side of the
appliance.

4EN
such as TVs, radios, and
radio-controlled clocks.
• The appliance is only
intended for household
use under normal
operating conditions.
• Do not use the appliance
in wet surroundings or in
surroundings with high
ambient temperatures,
such as the bathroom,
toilet, or kitchen.
• The appliance does
not remove carbon
monoxide (CO) or radon
(Rn). It cannot be used
as a safety device in
case of accidents with
combustion processes
and hazardous chemicals.
• If you need to move the
appliance, disconnect the
appliance from the power
supply first.
• Do not move the
appliance by pulling its
power cord.
• Always cleanse your
hands after changing the
filters.
• Do not insert your fingers
or objects into the air
outlet or the air inlet to
prevent physical injury
or malfunctioning of the
appliance.
• Do not use this appliance
when you have used
indoor smoke-type insect
repellents or in places
with oily residues, burning
incense, or chemical
fumes.
• Do not use the appliance
near gas appliances,
heating devices or
fireplaces.
• Always unplug the
appliance after use
and before cleaning,
or carrying out other
maintenance or replacing
the filters.
• Do not use the appliance
in a room with major
temperature changes,
as this may cause
condensation inside the
appliance.
• To prevent interference,
place the appliance at
least 2 meters away from
electrical appliances that
use airborne radio waves

5EN
English
Controls overview (g.b)
For AC2887
HOn/Off button
ILight dimming button
JAuto mode button
KDisplay screen
LGeneral mode icon
MAllergen mode icon
NBacteria&Virus mode icon
OFan speed button
PTimer button
QReset button
For AC2882
HOn/Off button
IAuto mode button
JDisplay screen
KGeneral mode icon
LAllergen mode icon
MBacteria&Virus mode icon
NFan speed button
OReset button
2 Your air purifier
Congratulations on your purchase, and
welcome to Philips!
To fully benefit from the support that
Philips offers, register your product at
www.philips.com/welcome.
Product overview (g.a)
AControl panel
BAir quality light
CAir quality sensors
DNanoProtect filter Series 3
(FY2422)*
ENanoProtect filter AC (FY2420)*
FPre-filter
GFront panel
* Hereinafter referred to as air
purification filter

6EN
4 Using the
appliance
Understanding the air
quality light
Air quality light
color
Air quality level
Blue Good
Blue-violet Fair
Red-purple Unhealthy
Red Very unhealthy
The air quality light automatically goes
on when the air purifier is switched on,
and lights up all colors in sequence.
After approximately 30 seconds, the
air quality sensors select the color that
corresponds to the surrounding air
quality of airborne particles.
Switching on and o
1 Put the plug of the appliance in the
wall outlet.
2 Touch to switch on the appliance
(fig.i).
»The appliance beeps.
»The appliance operates under
the general mode by default.
»After measuring the air quality
for a short time, the air quality
sensor automatically selects the
color of the air quality light.
»For AC2887, " " displays on
the screen when the appliance
is warming up. After measuring
the particle matters in the air,
the appliance goes to auto
mode with xx displayed on the
screen (fig. j).
3 Getting started
Installing lters
Note
• Make sure the air purifier is unplugged
from the electrical outlet before
installing the filters.
• Make sure the side of the filter with the
tag is pointing towards you.
1 Remove all packaging materials of
the air purification filters (fig.c).
2 Pull the bottom part of the front
panel to remove it from the
appliance (fig.d).
3 Press the two clips down and pull
the pre-filter towards you (fig.e).
4 Put the unpacked air purification
filters back into the appliance
(fig.f).
5 Attach the pre-filter back into the
appliance (fig.g).
Note
• Make sure that the side with the two
clips is pointing towards you, and that
all hooks of the pre-filter are properly
attached to the purifier.
6 Reattach the front panel by pressig
the top part of the panel onto the
top of the air purifier (1). Then,
gently push the panel against the
body of the air purifier (2) (fig.h).
7 Wash your hands thoroughly after
installing filters.

7EN
English
»For AC2882, after measuring
the particle matters in the air,
the appliance operates in auto
mode with displayed on the
screen (fig.k).
3 Touch and hold for 3 seconds to
switch off the appliance.
Note
• If the air purifier stays connected to
the electrical outlet after turning OFF,
the air purifier will operate under the
previous settings when turned ON
again.
Changing the Auto mode
setting
You can choose the General mode
( ), the Allergen mode ( ) and the
Bacteria & Virus mode ( ).
General mode
The specially designed pollution
mode can effectively remove airborne
pollutants such as pm2.5.
• Touch the Auto mode button to
select the General mode (fig.k).
»Auto (A) and display on the
screen.
Allergen mode
The specially designed allergen mode
can effectively remove common
allergens such as pollen and pet
dander.
• Touch the Auto mode button to
select the Allergen mode (fig.l).
»Auto (A) and display on the
screen.
Bacteria & Virus mode
The specially designed bacteria&virus
mode can effectively remove bacteria
& viruses such as staphylococcus albsp
and H1N1.
• Touch the Auto mode button to
select the Bacteria & Virus mode
(fig.m).
»Auto (A) and display on the
screen.
Changing the fan speed
There are several fan speeds available.
You can choose the sleep mode (SL),
speed 1, 2, 3 or turbo mode (t).
Sleep (SL)
In sleep mode, the appliance operates
quietly under very low speed.
• Touch the fan speed button to
select the sleep mode (SL) (fig.n).
Note
• In sleep mode, "SL" displays on the
screen for one minute. After that,all the
lights will go off and the display screen
will be dimmed with " " displayed.
• You can turn on the lights manually by
touching .
Manual
• Touch the fan speed button
repeatedly to select the fan speed
you need (fig.p).

8EN
Turbo (t)
In turbo mode, the appliance operates
under the highest speed.
• Touch the fan speed button to
select the turbo mode (t) (fig.o).
Setting the timer
Note
• The timer function is only applicable
for AC2887.
With the timer, you can let the
appliance operate for a set number of
hours. When the set time has elapsed,
the appliance will automatically switch
off.
• Touch the timer button
repeatedly to choose the number
of hours you want the appliance to
operate (fig.q).
»The timer has set intervals of 1,
4 or 8 hours.
To deactivate the timer, touch the timer
button repeatedly until "--"displays
on the screen.
Note
• If you have set the timer once, next
time when you use the timer, it starts
from the previous setting time.
Using the light on/o
function
Note
• The light dimming function is only
applicable for AC2887.
With the light dimming button, you can
switch on or off the air quality light,
the display screen and the function
indicators if needed.
1 Touch the light dimming button
once, the air quality light will be
dimmed.
2 Touch the light dimming button
again, the air quality light will go off.
The display screen and the function
indicators will still be on, but the
lights will be dimmed with " "
displayed on the screen.
3 Touch the light dimming button
for the third time, all lights will be on
again.

9EN
English
5 Cleaning
Note
• Always turn the air purifier off and
unplug from the electrical outlet
before cleaning.
• Never immerse the appliance in water
or any other liquid.
• Never use abrasive, aggressive, or
flammable cleaning agents such as
bleach or alcohol to clean any part of
the appliance.
• Only the pre-filter is washable. The air
purification filter is not washable nor
vacuum cleanable.
Cleaning schedule
Frequency Cleaning method
When necessary
Wipe the surface
of the appliance
with a soft dry
cloth
When F0
displays on the
screen
Clean the
pre-filter
Every two
months
Clean the air
quality sensors
Cleaning the body of the
appliance
Regularly clean the inside and outside
of the air purifier to prevent dust from
collecting.
1 Use a soft, dry cloth to clean both
the interior and exterior of the air
purifier.
2 The air outlet can also be cleaned
with a dry, soft cloth.
Cleaning the air quality
sensor
Clean the air quality sensor every
2 months for optimal functioning of the
purifier. Clean them more frequently
if you use the purifier in a dusty
environment.
Note
• When the humidity level in the
room is very high, it is possible that
condensation develops on the air
quality sensor. As a result, the air
quality light may indicate that the air
quality is bad even though it is good.
In this case you have to clean the
air quality sensor or use one of the
manual speed settings.
1 Switch off the air purifier and
unplug from the wall outlet.
2 Clean the air quality sensor inlet
and outlet with a soft brush (fig.r).
3 Remove the air quality sensor cover
(fig.s).
4 Clean the air quality sensor, the
dust inlet and the dust outlet with
a lightly moistened cotton swab
(fig.t).
5 Dry them with a dry cotton swab.
6 Reattach the air quality sensor
cover (fig.u).

10 EN
7 To reattach the front panel, mount
the panel onto the top of the
appliance first (1). Then, gently push
the panel against the body of the
appliance (2) (fig.h).
8 Touch and hold the reset button
for 3 seconds to reset the pre-filter
cleaning time (fig.x).
Cleaning the pre-lter
(g.v)
Filter alert light
status
Follow this
F0 displays on the
screen
Clean the pre-
filter
1 Switch off the air purifier and
unplug from the wall outlet.
2 Pull the bottom part of the front
panel to remove it from the
appliance (fig.d).
3 Press the two clips down and pull
the pre-filter towards you (fig.e).
4 Wash the pre-filter under a running
tap. If the pre-filter is very dirty, use
a soft brush to brush away the dust
(fig.w).
5 Air dry the pre-filter.
Note
• To optimize the lifetime of the pre-
filter, make sure it dries completely
after cleaning.
• Wash your hands after handling the
filter.
6 Put the pre-filter back into the
appliance (fig.g).
Note
• Make sure that the side with the two
clips is pointing towards you, and that
all hooks of the pre-filter are properly
attached to the purifier.

11EN
English
6 Replacing the
filter
Understanding the
healthy air protect lock
This appliance is equipped with the
healthy air protect lock to make sure
that the air purification filter is in
optimal condition when the appliance
is operating. When the filters are almost
expired, the filter code displays on the
screen to indicate that you need to
replace the filters.
If the filters are not replaced in 14 days,
the appliance will stop operating and
get locked.
Replacing the lters
(g.y)
Note
• The air purification filters are not
washable nor vacuum cleanable.
• Switch off the appliance before
replacing the filters.
Filter alert light
status
Follow this
A3 displays on the
screen
Replace the
NanoProtect filter
Series 3 (FY2422)
C7 displays on the
screen
Replace the
NanoProtect filter
AC (FY2420)
A3 and C7 display
on the screen
alternately
Replace both
filters
1 Take out the expired air purification
filter according to the filter code
displayed on the screen, and gently
put the expired filter into the trash
bin (fig.z).
Note
• Do not touch the pleated filter surface,
or smell the filters as they have
collected pollutants from the air.
2 Remove all packaging material of
the new filters (fig.c).
3 Place the new filters into the
appliance (fig.f).
4 Touch and hold the reset button
for 3 seconds to reset the filter
lifetime counter (fig.{).
Note
• Wash your hands after changing the
filter.
Filter force reset
1 Touch and simultaneously
for 3 seconds to enter the filter force
reset mode (fig.|).
»Code (A3) of the NanoProtect
filter Series 3 displays on the
screen.
2 Touch and hold for 3 seconds to
force reset the filter lifetime of the
NanoProtect filter Series 3(fig.{).
3 Code (C7) of the NanoProtect filter
AC displays on the screen after the
lifetime of the NanoProtect filter
Series 3 has been reset (fig.}).
4 Touch and hold for 3 seconds to
force reset the filter lifetime of the
NanoProtect filter AC and exit the
filter force reset mode (fig.~).
Filter type change
1 Touch and simultaneously
for 3 seconds to enter the filter type
change mode (fig.|).

12 EN
»Code (A3) of the NanoProtect
filter Series 3 displays on the
screen.
2 Touch to select the filter code of
the new filter you will use (fig.).
3 Touch and hold for 3 seconds to
confirm the filter code of the new
filter (fig.€).
Note
• After you have selected the filter code
of the new filter using the button,
if you do not touch any other buttons
in 10 seconds, the appliance will
automatically confirm the filter code of
the new filter.
4 Code (C7) of the Nanoprotect filter
AC displays on the screen after the
first filter type has been changed
(fig.}).
5 Touch to select the new filter
code of the second filter (fig.).
6 Touch and hold for 3 seconds to
confirm the filter code of the second
filter and exit the filter type change
mode (fig.‚).
Note
• After you have selected the filter code
of the new filter using the button,
if you do not touch any other buttons
in 10 seconds, the appliance will
automatically confirm the filter code of
the new filter.

13EN
English
7 Troubleshooting
This chapter summarizes the most common problems you could encounter with the
appliance. If you are unable to solve the problem with the information below, contact
the Consumer Care Center in your country.
Problem Possible solution
The appliance
does not work
even though it is
plugged in.
• The filter replacement code has been displaying on the
screen but you have not replaced the corresponding filter
yet. The appliance will be locked if you keep using the
expired filter. In this case, replace the filter and reset the
filter lifetime counter.
The appliance
does not work
even though it is
switched on.
• The filter replacement code has been on continuously but
you have not replaced the corresponding filter, and the
appliance is now locked. In this case, replace the filter and
reset the filter lifetime counter.
The appliance
accidentally
powers o.
• The appliance restarts automatically and goes to the
previous mode when the power resumes.
The airow that
comes out of
the air outlet
is signicantly
weaker than
before.
• The pre-filter is dirty. Clean the pre-filter (see chapter
"Cleaning").
The air quality
does not improve,
even though the
appliance has
been operating for
a long time.
• One of the filters has not been placed in the appliance.
Make sure that all filters are properly installed in the
following order, starting with the innermost filter:
1) NanoProtect filter Series 3; 2) pre-filter.
• The air quality sensor is wet. The humidity level in your
room is high and causes condensation. Make sure that the
air quality sensor is clean and dry (see chapter "Cleaning").
The color of the air
quality light always
stays the same.
• The air quality sensor is dirty. Clean the air quality sensor
(see chapter "Cleaning").

14 EN
Problem Possible solution
The appliance
produces a strange
smell.
• The first few times you use the appliance, it may produce
a plastic smell. This is normal. However, if the appliance
produces a burnt smell, contact your Philips dealer or an
authorized Philips service centre. The appliance may also
produce an unpleasant smell when the filter is dirty. In this
case, clean or replace the filter concerned.
The appliance is
extra loud.
• If the appliance is too loud, you can change the fan speed
to a lower fan speed level. When using the appliance in a
bedroom at night, choose the sleep mode.
The appliance still
indicates that I
need to replace a
lter, but I already
did.
• Perhaps you did not reset the filter lifetime counter. Plug
in the appliance, touch to switch on the appliance, and
touch and hold the reset button for 3 seconds.
Error codes "E1",
"E2", "E3" or "E4"
displays on the
screen.
• The appliance has malfunctions. Contact the Consumer
Care Center in your country.

15EN
English
9 Notices
Electromagnetic elds
(EMF)
This Philips appliance complies with all
applicable standards and regulations
regarding exposure to electromagnetic
fields.
Compliance with EMF
Koninklijke Philips N.V. manufactures
and sells many products targeted at
consumers, which, like any electronic
apparatus, in general have the ability
to emit and receive electromagnetic
signals.
One of Philips' leading Business
Principles is to take all necessary health
and safety measures for our products,
to comply with all applicable legal
requirements and to stay well within the
EMF standards applicable at the time of
producing the products.
Philips is committed to develop,
produce and market products that
cause no adverse health effects. Philips
confirms that if its products are handled
properly for their intended use, they
are safe to use according to scientific
evidence available today.
Philips plays an active role in the
development of international EMF
and safety standards, enabling Philips
to anticipate further developments in
standardization for early integration in
its products.
8 Guarantee and
service
If you need information or if you have a
problem, please visit the Philips website
at www.philips.com or contact the
Philips Consumer Care Center in your
country (you find its phone number
in the worldwide guarantee leaflet). If
there is no Consumer Care Centre in
your country, go to your local Philips
dealer.
Order parts or
accessories
If you have to replace a part or want to
purchase an additional part, go to your
Philips dealer or visit www.philips.com/
support.
If you have problems obtaining the
parts, please contact the Philips
Consumer Care Center in your country
(you can find its phone number in the
worldwide guarantee leaflet).

16 EN
Recycling
This symbol means that this product
shall not be disposed of with normal
household waste (2012/19/EU).
Follow your country’s rules for the
separate collection of electrical and
electronic products. Correct disposal
helps prevent negative consequences
for the environment and human health.

17
CS
Čeština
Obsah
1 Důležité 18
Bezpečnost 18
2 Vaše čistička vzduchu 21
Přehled výrobku (obr. a) 21
Přehled ovládacích prvků
(obr. b) 21
3 Začínáme 22
Instalace ltrů 22
4 Použití přístroje 22
Jak funguje kontrolka kvality
vzduchu 22
Zapnutí a vypnutí 22
Změna nastavení
automatického režimu 23
Změna rychlosti ventilátoru 23
Nastavení časovače 24
Používání funkce zapnutí/
vypnutí osvětlení 24
5 Čištění 25
Plán čištění 25
Čištění těla přístroje 25
Čištění snímače kvality vzduchu 25
Čištění předltru (obr. v) 25
6 Výměna ltru 26
Jak funguje zámek ochrany
zdravého vzduchu 26
Výměna ltrů (obr. y) 26
Vynucené resetování ltrů 27
Změna typu ltru 27
7 Odstraňování problémů 28
8 Záruka a servis 30
Objednání dílů nebo doplňků 30
9 Upozornění 30
Elektromagnetická pole (EMP) 30
Recyklace 31

18
CS
1 Důležité
Bezpečnost
Před použitím přístroje si pozorně
přečtěte tuto uživatelskou příručku a
uschovejte ji pro budoucí použití.
Nebezpečí
• Zamezte proniknutí
vody, jiné kapaliny nebo
hořlavého čisticího
prostředku do přístroje.
Předejdete tak úrazu
elektrickým proudem a/
nebo požáru.
• Přístroj nečistěte vodou,
jakoukoli jinou tekutinou
ani (hořlavým) čisticím
prostředkem. Předejdete
tak úrazu elektrickým
proudem a/nebo požáru.
• Kolem přístroje
nerozstřikujte žádné
hořlavé látky, jako jsou
například insekticidy nebo
parfémy.
Varování
• Dříve než přístroj připojíte
do sítě, zkontrolujte,
zda napětí uvedené na
přístroji souhlasí s napětím
v místní elektrické síti.
• Pokud by byl poškozen
napájecí kabel, musí
jeho výměnu provést
společnost Philips,
autorizovaný servis
společnosti Philips nebo
obdobně kvalikovaní
pracovníci, aby se
předešlo možnému
nebezpečí.
• Pokud byste zjistili závadu
na zástrčce, na napájecím
kabelu nebo přímo na
přístroji, přístroj dále
nepoužívejte.
• Děti od 8 let věku a osoby
s omezenými fyzickými,
smyslovými nebo
duševními schopnostmi
nebo nedostatkem
zkušeností a znalostí
mohou tento přístroj
používat v případě, že
jsou pod dohledem
nebo byly poučeny
o bezpečném používání
přístroje a chápou rizika,
která mohou hrozit. Děti
si s přístrojem nesmí hrát.
Čištění a údržbu nesmí
provádět děti bez dozoru.