Philips AMF220 User manual

AMF220
EN User manual 1 22
ﻡﺪﺨﺘﺴﳌﺍ ﻞﻴﻟﺩ AR
This product is only suitable for well insulated spaces or occasional use.
           .

1EN
English
Contents
1 Your 3-in-1: air purier, fan and heater ������������������������������������2
Product overview .......................................................................................................2
Display overview ........................................................................................................ 3
Controls overview ......................................................................................................4
2 Getting started ������������������������������������������������������������������������������5
Installing the lter ......................................................................................................5
Setting up the remote control ...............................................................................5
3 Using the 3-in-1: air purier, fan and heater ���������������������������5
Air quality light ............................................................................................................5
Turning on and o ......................................................................................................6
Heater and fan ............................................................................................................6
Oscillation .....................................................................................................................6
Setting the timer .........................................................................................................6
Setting the child lock ................................................................................................6
Sleep, turning light on/o ....................................................................................... 7
Pairing your remote control .................................................................................... 7
Replacing the battery ............................................................................................... 7
4 Cleaning and maintenance ��������������������������������������������������������8
Cleaning the body of the appliance ....................................................................8
Cleaning the lter surface .......................................................................................8
Filter replacement ......................................................................................................8
5 Troubleshooting ���������������������������������������������������������������������������9

2EN
1 Your 3-in-1: air purifier, fan and heater
Congratulations on your purchase, and welcome to Philips!
To fully benet from the support that Philips oers, register your product at
www.philips.com/welcome.
Product overview
AB
C
D
F
E
G
H
I
J
ARemote control FDisplay screen
BHousing GPhilips lter (FYM220/30)
CControl buttons HBack cover
DLight strip IStorage slot for remote control
EAir outlet JAir quality sensor

3EN
English
Display overview
K
L
M
N
O
KTemperature display NAir quality indicator
LChild lock indicator OFilter replacement alert
MPM2.5 display

4EN
Controls overview
Short press Timer Oscillation Fan setting Heater setting On/o
Press for
3 seconds
Sleep
Light on/o
Reset lter
lifetime Child lock

5EN
English
2 Getting started
Installing the lter
Note: Make sure the appliance is unplugged from the electrical outlet before installing the lter.
1 2 3 4 5
1 To remove the back cover, hold the side of it with both hands and pull.
2 Pull the lter from the appliance.
3 Remove all packaging materials from the lter.
4 Put the lter back into the appliance.
5 Reattach the back cover.
Setting up the remote control
1 Pull out the plastic lm on the remote control to
activate the battery.
2 Pair the remote control with the appliance if
you have multiple devices in one house (see the
chapter “Pairing your remote control”).
Note: Place the remote control in the slot and it snaps in place
automatically.
3 Using the 3-in-1: air purifier, fan and heater
Air quality light
PM2�5 level Air quality light color Air quality level
≤35 Blue Good
36-75 Blue-purple Fair
76-115 Purple-red Poor
> 115 Red Very poor

6EN
Turning on and o
Note:
• Plug the appliance into the power outlet; do not use a power strip.
• If the appliance is running in heating mode when you turn it o, it continues working for
a few seconds to exhaust the remaining heat.
1 Press to switch on the appliance.
2 The display panel lights up, and appliance shows the PM2.5 level
and temperature.
3 Press to switch o the appliance.
Heater and fan
Light strip
Heater ( ) Low Medium High Red
Fan ( ) Low Medium High Blue
Oscillation
Press the button, the appliance can oscillate at three angles: 60°, 120° and 350°.
Setting the timer
Press the button repeatedly to set operating hours of the appliance. The timer is available
from 1to 7hours.
1 hour 2 hours 3 hours 4 hours 5 hours 6 hours 7 hours
To deactivate the timer, press the button repeatedly until all the hour indicators are o.
Setting the child lock
1 Press and hold the button for 3 seconds to activate the child
lock.
»appears on the screen.
»All the other buttons are unresponsive except on/o.
2 Press and hold the button for 3 seconds to deactivate child
lock.
»disappears.
3s

7EN
English
Sleep, turning light on/o
1 Press and hold the button for 3 seconds.
»The display screen dims, rest lights will turn o.
2 Press any button to turn all lights on.
Pairing your remote control
X 2
1
5s
2
1 Unplug the appliance from the power outlet and wait for 10 seconds. Plug in the
appliance, then within 5 seconds,press the button on the appliance twice.
»The 2h indicator lights up.
2 Long press the button for 5 seconds on the remote control within 5 seconds.
»The and indicator of fan button on the appliance lights up, and the appliance
operates in the fan mode, indicating that the pairing is successful.
Note: If the “2h” indicator is blinking, you must repeat the pairing.
Replacing the battery
1
1
2
2 3
1 Push the battery bracket edge gently and pull it out of the remote control.
2 Insert the new battery with correct polarities as indicated.
3 Put the battery bracket back into the remote control.
3s

8EN
4 Cleaning and maintenance
Note: Switch o the appliance and unplug it from the power outlet before continuing.
Cleaning the body of the appliance
Use a soft, dry cloth to clean the appliance surface, including air inlet and
outlet.
Clean particle sensor surface. Do not open particle sensor cover.
Cleaning the lter surface
Clean the lter surface with a vacuum cleaner or brush every two weeks.
1 4 532
1 Pull the back cover and remove it from the appliance.
2 Pull the lter from the appliance.
3 Clean the surface of the lter with a vacuum cleaner.
4 Put the lter back into the appliance.
5 Reattach the back cover.
6 Wash your hands thoroughly after cleaning the lter.
Filter replacement
When the lter replacement alert lights up
Note:
• The lter is not washable or reusable.
• Do not smell the lter because it contains air pollutants.
Replace the lter when lights up on the screen.
1 Replace the lter with Philips lter (FYM220/30). Follow the
instructions in the chapter “Installing the lter”.
2 Press to switch on the appliance.
6