Philips AMF220/65 User manual

User manual
AMF220
This product is only suitable for well insulated spaces or occasional use.

1EN
Contents
1 Your 3-in-1: air purier, fan and heater ������������������������������������2
Product overview .......................................................................................................2
Display overview ........................................................................................................ 3
Controls overview ......................................................................................................4
2 Getting started ������������������������������������������������������������������������������5
Installing the lter ......................................................................................................5
Setting up the remote control ...............................................................................5
3 Using the 3-in-1: air purier, fan and heater ���������������������������5
Air quality light ............................................................................................................5
Turning on and o ......................................................................................................6
Heater and fan ............................................................................................................6
Oscillation .....................................................................................................................6
Setting the timer .........................................................................................................6
Setting the child lock ................................................................................................6
Sleep, turning light on/o ....................................................................................... 7
Pairing your remote control .................................................................................... 7
Replacing the battery ............................................................................................... 7
4 Cleaning and maintenance ��������������������������������������������������������8
Cleaning the body of the appliance ....................................................................8
Cleaning the lter surface .......................................................................................8
Filter replacement ......................................................................................................8
5 Troubleshooting ���������������������������������������������������������������������������9

2EN
1 Your 3-in-1: air purifier, fan and heater
Congratulations on your purchase, and welcome to Philips!
To fully benet from the support that Philips oers, register your product at
www.philips.com/welcome.
Product overview
AB
C
D
F
E
G
H
I
J
ARemote control FDisplay screen
BHousing GPhilips lter (FYM220/30)
CControl buttons HBack cover
DLight strip IStorage slot for remote control
EAir outlet JAir quality sensor

3EN
Display overview
K
L
M
N
O
KTemperature display NAir quality indicator
LChild lock indicator OFilter replacement alert
MPM2.5 display

4EN
Controls overview
Short press Timer Oscillation Fan setting Heater setting On/o
Press for
3 seconds
Sleep
Light on/o
Reset lter
lifetime Child lock

5EN
2 Getting started
Installing the lter
Note: Make sure the appliance is unplugged from the electrical outlet before installing the lter.
12 3 4 5
1 To remove the back cover, hold the side of it with both hands and pull.
2 Pull the lter from the appliance.
3 Remove all packaging materials from the lter.
4 Put the lter back into the appliance.
5 Reattach the back cover.
Setting up the remote control
1 Pull out the plastic lm on the remote control to
activate the battery.
2 Pair the remote control with the appliance if
you have multiple devices in one house (see the
chapter “Pairing your remote control”).
Note: Place the remote control in the slot and it snaps in place
automatically.
3 Using the 3-in-1: air purifier, fan and heater
Air quality light
PM2�5 level Air quality light color Air quality level
≤60 Blue Good
61-120 Blue-purple Fair
121-250 Purple-red Poor
> 250 Red Very poor

6EN
Turning on and o
Note:
• Plug the appliance into the power outlet; do not use a power strip.
• If the appliance is running in heating mode when you turn it o, it continues working
for 20 seconds to exhaust the remaining heat. Counting down will show on the display
panel.
1 Press to switch on the appliance.
2 The display panel lights up, and appliance shows the PM2.5 level
and temperature.
3 Press to switch o the appliance.
Heater and fan
Light strip
Heater ( ) Low Medium High Red
Fan ( ) Low Medium High Blue
Oscillation
Press the button, the appliance can oscillate at three angles: 60°, 120° and 350°.
Setting the timer
Press the button repeatedly to set operating hours of the appliance. The timer is available
from 1to 7hours.
1 hour 2 hours 3 hours 4 hours 5 hours 6 hours 7 hours
To deactivate the timer, press the button repeatedly until all the hour indicators are o.
Setting the child lock
1 Press and hold the button for 3 seconds to activate the child
lock.
»appears on the screen.
»All the other buttons are unresponsive except on/o.
2 Press and hold the button for 3 seconds to deactivate child
lock.
»disappears.
3s

7EN
Sleep, turning light on/o
1 Press and hold the button for 3 seconds.
»The display screen dims, rest lights will turn o.
2 Press any button to turn all lights on.
Pairing your remote control
X 2
1
5s
2
1 Unplug the appliance from the power outlet and wait for 10 seconds. Plug in the
appliance, then within 5 seconds,press the button on the appliance twice.
»The 2h indicator lights up.
2 Long press the button for 5 seconds on the remote control within 5 seconds.
»The and indicator of fan button on the appliance lights up, and the appliance
operates in the fan mode, indicating that the pairing is successful.
Note: If the “2h” indicator is blinking, you must repeat the pairing.
Replacing the battery
1
1
2
2 3
1 Push the battery bracket edge gently and pull it out of the remote control.
2 Insert the new CR2032 battery with correct polarities as indicated.
3 Put the battery bracket back into the remote control.
3s

8EN
4 Cleaning and maintenance
Note: Switch o the appliance and unplug it from the power outlet before continuing.
Cleaning the body of the appliance
Use a soft, dry cloth to clean the appliance surface, including air inlet and
outlet.
Clean particle sensor surface. Do not open particle sensor cover.
Cleaning the lter surface
Clean the lter surface with a vacuum cleaner or brush every two weeks.
1 4 532
1 Pull the back cover and remove it from the appliance.
2 Pull the lter from the appliance.
3 Clean the surface of the lter with a vacuum cleaner.
4 Put the lter back into the appliance.
5 Reattach the back cover.
6 Wash your hands thoroughly after cleaning the lter.
Filter replacement
When the lter replacement alert lights up
Note:
• The lter is not washable or reusable.
• Do not smell the lter because it contains air pollutants.
Replace the lter when lights up on the screen.
1 Replace the lter with Philips lter (FYM220/30). Follow the
instructions in the chapter “Installing the lter”.
2 Press to switch on the appliance.
6

9EN
3 Press and hold the button for
3 seconds to reset the lter replacement
time.
»The lter replacement alert
disappears from the screen.
4 Wash your hands thoroughly after
replacing the lter.
3
3s
4
Before the lter replacement alert lights up
You can replace the lter before the lter replacement alert ( ) lights up. If you do this, you
need to reset the lter lifetime counter manually.
1 Unplug the appliance from the power outlet and wait 10 seconds.
2 Plug the appliance into the power outlet.
3 Within 15 seconds after power on, press and hold the button for
3 seconds to reset the lter lifetime counter.
»The lter replacement alert blinks once after successfully
resetting the lter.
5 Troubleshooting
This chapter summarizes the most common problems you could encounter with the
appliance. If you are unable to solve the problem with the information below, contact the
Consumer Care Center in your country.
Problem Possible solution
The airow from
the air outlet is
signicantly weaker
than before.
• The surface of the lter is dirty. Clean the surface of the lter (see
the chapter “Cleaning and maintenance”).

10 EN
Problem Possible solution
The air quality does
not improve even
though the appliance
has been operating
for a long time.
• Check whether the packing material is removed from the lter.
• Check whether the lter is installed in the appliance.
• Clean the sensor cover surface with mop or vacuum cleanser;
Do not open sensor cover or touch inside.
• Room size is too large, or the outdoor air quality is poor.
For optimum purication performance, close the doors and
windows when operating the appliance.
• There are indoor pollution sources. Examples include cigarette
smoke, cooking fumes, incense, perfume and alcohol.
• Filter has reached end of life. Replace the lter with a new one.
The appliance
produces a strange
smell.
• The rst few times you use the appliance, it may produce a plastic
smell. This is normal.
• If the appliance produces a burning smell, immediately unplug
it and turn it upside down to check whether any foreign objects
have fallen into the appliance. If nothing is found, please contact
your Philips dealer or an authorized Philips service center.
• The lter may produce an odor after being used for a while
because of the absorption of indoor gases. It’s recommended that
you reactivate the lter by putting it in direct sunlight for repeated
use. If the odor remains, replace the lter.
The appliance is too
loud.
• The noise level is higher if you select high speed.
• If anything drops into air outlet, it may also cause abnormal loud
sound. Immediate turn o the appliance and turn it upside down
to remove foreign objects.
• If there is an abnormal sound, contact the Consumer Care Center
in your country.
The appliance still
indicates that I need
to replace a lter, but
I already did.
• Perhaps you did not reset the lter lifetime counter. Switch on the
appliance. Then press and hold the button for 3 seconds.
The heating function
is not working.
• Check whether the air inlet or air outlet is blocked.
• Check whether the lter surface is excessively dirty and
blocking airow. If so, the heating function may stop working for
protection.

11EN
Model identier(s): AMF220
Item Symbol Value Unit Item Unit
Heat output Type of heat input, for electric storage
local space heaters only (select one)
Nominal heat output Pnom 2,1 kW manual heat charge control, with
integrated thermostat
[no]
Minimum heat output
(indicative)
Pmin 1,2 kW manual heat charge control with room
and/or outdoor temperature feedback
[no]
Maximum continuous
heat output
Pmax, C 1,8 kW electronic heat charge control with room
and/or outdoor temperature feedback
[yes]
Auxiliary electricity
consumption
fan assisted heat output [no]
At nominal heat output elmax N/A kW Type of heat output/room temperature control
(select one)
At minimum heat
output
elmin N/A kW single stage heat output and no room
temperature control
[no]
In standby mode elSB 0 kW Two or more manualstages, no room
temperature control
[no]
with mechanic thermostat room
temperature control
[no]
with electronic room temperature control [yes]
electronic room temperature control plus
day timer
[no]
electronic room temperature control plus
week timer
[no]
Other control options (multiple selections possible)
room temperature control, with
presence detection
[no]
room temperature control, with open
window detection
[no]
with distance control option [no]
with adaptive start control [no]
with working time limitation [yes]
with black bulb sensor [no]
Contact details DAP B.V.
Tussendiepen 4 a, 9206AD Drachten, The Netherlands
Information requirements for electric local space heaters

© 2021 Philips Domestic Appliances Holding B.V.
All rights reserved.
3000 066 33101