Philips SCD450/79 User manual

Philips
Analogue monitor
SCD450/79
Two parent units
Both parents can constantly stay in touch with the baby. Two parent units for freedom
of movement without loosing contact with your baby. With small, mobile and
rechargeable parent unit, belt clip and digital signal confirmation.
Complete peace of mind
• Minimum interference from other monitors
• Uses lights to indicate if the baby makes noise
• Indicates a continuous connection between the two units
• Lights up when batteries need recharging or replacing
Ultimate mobility in and around the house
• Now both parents can monitor baby
• Small, mobile parent unit to freely roam around the house
• Ensures secure reception in and around house
• Rechargeable, cordless monitoring anywhere
• Belt clip and neck cord for hands-free convenience
Convenience for you and your child
• Adjust volume and sound sensitivity to suit any situation
Soothing words
• Soft glow comforts baby if it wakes

Issue date 2010-12-08
Version: 2.2.1
12 NC: 0000 000 00000
© 2010 Koninklijke Philips Electronics N.V.
All Rights reserved.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
www.philips.com
Specifications
SCD450/79
Analogue monitor
Highlights
16 channels
Minimum interference from other monitors.
Small, mobile parent unit
Allows you to freely roam around the house due to
the small size, but still hear when your baby needs
you.
Up to 200 m range
Ensures secure reception in and around house.
Cordless parent unit
Rechargeable, cordless monitoring anywhere.
Soothing night-light
Soft glow comforts baby if it wakes
Tuner/Reception/Transmission
• Frequency band: 40.675 - 40.690 MHz
• Pilot tone: Digital
• Maximum range: 200 m
• Number of channels: 16
Convenience
• Auto out of range warning
• Battery charging indication
• Battery low indication
• Power on indication
• Sound-level lights
• System check: Battery check light, System check
light, System check alarm
•Volumecontrol
Accessories
• AC/DC adaptor: 3x 9V DC 200mA
• Batteries: 3 x AAA rech. batt pack, small parent
unit (incl.)
• Belt clip: Belt clip on both parent units
• Charger: Charging base for parent unit
• Docking station: For small parent unit
•Usermanual
•Quickstartguide
Power
• Operating time on battery: 12 hour(s)
•