Philips HR2170/50 User manual

HR2171, HR2170, HR2168, HR2167, HR2161, HR2160
Register your product and get support at
www.philips.com/welcome

1

20

HR2171, HR2170, HR2168, HR2167, HR2161, HR2160
ENGLISH 6
INDONESIA 16
한국어 27
BAHASA MELAYU 37
ภาษาไทย 48
 57
繁體中文 67
简体中文 76
99
108

6
Introduction
Congratulations on your purchase and welcome to Philips! To fully benet from the support that
Philips offers, register your product at www.philips.com/welcome.
The appliance is equipped with a built-in safety system that prevents the appliance from functioning
if the accessories have been assembled incorrectly or have not been assembled at all.
General description (Fig. 1)
1 Measuring cup
2 Opening in lid
3 Lid of plastic blender jar
4 Level indication
5 Plastic blender jar (HR2168/HR2167/HR2161/HR2160)
6 Plastic blender blade unit
7 Motor unit with control knob
8 Ice button
9 Speed settings
10 Filter (HR2168/HR2167 only)
11 Pulse setting
12 Glass blender blade unit
13 Level indication
14 Glass blender jar (HR2170 only)
15 Lid of glass blender jar
16 Opening in lid
17 Measuring cup
18 Opening in lid
19 Lid of stainless steel jar
20 level indication
21 Stainless steel jar (HR2171)
22 Coupling unit
23 Chopper bowl (HR2168 only)
24 Chopper blade unit
25 Chopper lid
26 Mill beaker (HR2168/HR2167/HR2161 only)
27 Mill blade unit
Important
Read this user manual carefully before you use the appliance and save it for future reference.
General
Danger
- Never immerse the motor unit in water or any other liquid, nor rinse it under the tap. Use only
a moist cloth to clean the motor unit.
Warning
- Check if the voltage indicated on the appliance corresponds to the local mains voltage before
you connect the appliance.
- If the mains cord is damaged, you must have it replaced by Philips, a service centre authorised by
Philips or similarly qualied persons in order to avoid a hazard.
- Do not use the appliance if the plug, the mains cord or other parts are damaged.
- Never use the blender jar, mill beaker (HR2168, HR2167, HR2161 only) or chopper bowl
(HR2168 only) to switch the appliance on and off.
- Never let the appliance run unattended.
ENGLISH

- This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their
safety.
- Children should be supervised to ensure that they do not play with the appliance.
- Do not touch the blades, especially when the appliance is plugged in.The blades are very sharp.
Caution
- Always unplug the appliance before you assemble, disassemble or make adjustments to any of
the parts.
- Never use any accessories or parts from other manufacturers or that Philips does
not specically recommend. If you use such accessories or parts, your guarantee becomes
invalid.
- Do not exceed the maximum indication on the blender jar, the mill (HR2168, HR2167, HR2161
only) beaker and the chopper bowl (HR2168 only).
- Do not exceed the maximum quantities and processing times indicated in the relevant table.
- The appliance can only be switched on if the blender jar, the mill beaker (HR2168, HR2167,
HR2161 only) or the chopper bowl (HR2168 only) is assembled on the motor unit correctly.
Blender
Warning
- Never reach into the blender jar with your ngers or an object while the appliance is running.
- Make sure the blade unit is securely fastened to the blender jar before you assemble the
blender jar onto the motor unit.
- Do not touch the cutting edges of the blender blade unit when you handle or clean it.They are
very sharp and you could easily cut your ngers on them.
- If the blade unit gets stuck, unplug the appliance before you remove the ingredients that block
the blades.
Caution
- Never ll the blender jar with ingredients hotter than 80ºC/ 175°F.
- HR2171: Never ll the stainless steel blender jar with ingredients hotter than 100°C/ 212°F.
- To prevent spillage, do not put more than 1.5 litres of liquid in the blender jar, especially when
you process at a high speed. Do not put more than 1 litre in the blender jar when you process
hot liquids or ingredients that tend to foam.
- If food sticks to the wall of the blender jar, switch off the appliance and unplug it.Then use a
spatula to remove the food from the wall.
- Always make sure the lid is properly closed/assembled on the jar and the measuring cup is
inserted properly in the lid before you switch on the appliance.
- HR2171 only: The jar is made of stainless steel. Do not drop the jar on a hard oor. Avoid
extreme thermal shocks.
- HR2170 only:The jar is made of glass and therefore breakable. Do not drop the jar on a hard
oor. Also avoid extreme thermal shocks. If the jar is very cold, rinse it well with lukewarm water
before you pour hot liquid into it. If the glass jar cracks, stop using it.
Mill (HR2168/HR2167/HR2161 only)
Warning
- Make sure the blade unit is securely fastened to the mill beaker before you assemble the mill
beaker onto the motor unit.
- Do not touch the cutting edges of the mill blade unit when you handle or clean it.They are very
sharp and you could easily cut your ngers on them.
- Never use the mill to grind very hard ingredients such as nutmeg and ice cubes.
ENGLISH 7

Caution
- Never use the mill for more than 30 seconds without interruption. Let the mill cool down to
room temperature between processing cycles.
- Always process cloves, star anise and aniseed together with other ingredients. If processed
separately, these ingredients may attack the plastic materials of the appliance.
- The mill beaker may become discoloured when you use the mill to process ingredients such as
cloves, anise and cinnamon.
- The mill is not suitable for chopping raw meat. Use the blender or chopper instead.
- Do not use the mill to process liquids such as fruit juice.
Chopper (HR2168 only)
Warning
- Make sure the coupling unit is securely fastened to the chopper bowl before you assemble the
chopper onto the motor unit.
- Do not touch the cutting edges of the chopper blade unit when you handle or clean it.They are
very sharp and you could easily cut your ngers on them.
- Never reach into the chopper bowl with your ngers or an object while the appliance is
running.
- If the blade unit gets stuck, unplug the appliance before you remove the ingredients that block
the blades.
Caution
- Always make sure the lid is properly assembled on the chopper bowl before you switch on the
appliance.
- If food sticks to the wall of the chopper bowl, switch off the appliance and unplug it.Then use a
spatula to remove the food from the wall.
Filter (HR2168/HR2167 only)
Caution
- Never use the lter to process ingredients hotter than 80°C/ 175°F.
- Never overload the lter. Do not ll the lter beyond its metal part.
- Always make sure the lid of the blender jar is closed/assembled properly and the measuring
cup is inserted properly in the lid before you switch on the appliance.
- Cut fruit into smaller pieces before you put it in the lter.
- Soak dried ingredients, such as soy beans, before you put them in the lter.
Electromagnetic elds (EMF)
This Philips appliance complies with all standards regarding electromagnetic elds (EMF). If handled
properly and according to the instructions in this user manual, the appliance is safe to use based on
scientic evidence available today.
Built-in safety lock
This feature ensures that you can only switch on the appliance if the blender jar and lid, the mill
beaker or the chopper bowl and lid (HR2168 only) are assembled on the motor unit properly. If the
blender jar and lid, the mill beaker or the chopper bowl and lid are correctly assembled, the built-in
safety lock will be unlocked.
Motor circuit protector
The appliance is equipped with a motor circuit protector that switches off the motor if the motor
jams (which might occur during heavy processing jobs or if the appliance is not used according to the
instructions in the user manual). If this happens, rst switch off and unplug the appliance and let it
cool down to room temperature.Then check if the quantity of ingredients you are processing does
not exceed the quantity mentioned in the user manual or if something is blocking the blade unit.
ENGLISH8

Before rst use
Thoroughly clean the parts that come into contact with food before you use the appliance for the
rst time (see chapter ‘Cleaning’).
Using the appliance
Blender
,The blender is intended for:
- Blending uids, e.g. dairy products, sauces, fruit juices, soups, mixed drinks, shakes.
- Mixing soft ingredients, e.g. pancake batter or mayonnaise.
- Pureeing cooked ingredients, e.g. for making baby food.
- HR2171 only: Blending hot soups up to 100°C/ 212°F.
Preparing the blender for use
1 Screw the blender blade unit clockwise onto the blender jar (Fig. 2).
2 Mount the blender jar with the blade unit attached to it onto the motor unit and turn it
clockwise until it locks into position (Fig. 3).
3 Put the ingredients in the blender jar.
Let hot ingredients cool down before you put them in the blender jar (max. temperature
80°C/175°F). HR2171 only: The max. temperature for ingredients processed in the stainless steel
blender jar is 100°C/212°F.
4 HR2170 only: Fasten the lid on the jar by pressing it onto the jar and turning it
clockwise. (Fig. 4)
Note: Make sure that the sieve in the lid is positioned in front of the spout of the jar to be able to pour
out liquids.
5 HR2171/HR2168/HR2167/HR2161/HR2160 only: Close the lid.
6 Insert the measuring cup into the lid (Fig. 5).
Note:To disassemble the blender, follow the instructions above in reverse order and direction.
Using the blender
Never reach into the jar with your ngers or an object (e.g. a spatula), while the blender is
running.
HR2171 only: Only touch the jar handle while hot ingredients are in the jar. The lid, bottom and
outer surface of the jar are hot.
Do not exceed the maximum level indicated on the blender jar. HR2171 only:You can see the
graduation on the inside of the jar.
1 Put the mains plug in the wall socket.
2 Switch on the appliance. (Fig. 6)
Note: See the blender table at the end of this user manual for the recommended quantities, speed
settings and processing times.
- To process ingredients at a particular speed, turn the control knob to the required speed setting.
Do not let the appliance run for more than 2 minutes at a time. Let the appliance cool down to
room temperature before you continue processing.
- To process ingredients very briey, turn the control knob to the pulse setting (P) several times.
Never use the pulse setting longer than a few seconds at a time.
ENGLISH 9

- To crush ice, press the ICE button.
Tip:You can see the result thorough the transparent lid.
3 When you have nished processing, set the control knob to 0 and unplug the appliance.
Always set the control knob to 0 before your open the lid.
Tips
- To prevent spillage, do not put more than 1.5 litres of liquid in the blender jar, especially when
you process at a high speed. Do not put more than 1 litre in the blender jar when you process
hot liquids or ingredients that tend to foam.
- You can use the opening in the lid to add ingredients while the appliance is running (Fig. 7).
- Do not process dry ingredients for more than 1 minute.
- Cut solid ingredients into smaller pieces before you put them in the blender jar. Do not process
a large quantity of solid ingredients at the same time. Process these ingredients in a series of
small batches instead.
- If you are not satised with the results when you blend solid ingredients, use the pulse setting a
few times to let the blender run briey. If you want to use a spatula, switch off the appliance,
open the lid and then stir the ingredients.You can also remove some of the contents of the jar
and process smaller amounts.
- To crush ice cubes, put max. 5 cubes in the jar at a time and press the ICE button a few times.
HR2171 only: The jar is made of stainless steel. Do not drop the jar on a hard oor. Avoid
extreme thermal shocks. HR2170 only:The jar is made of glass and therefore breakable. Do not
drop the jar on a hard oor. Also avoid extreme thermal shocks. If the jar is very cold, rinse it
well with lukewarm water before you pour hot liquid into it. If the glass jar cracks, stop using it.
Filter (HR2168/HR2167 only)
You can use the lter to obtain extra nely blended sauces, fresh fruit juices or cocktails. All pips and
skins are caught in the lter.
HR2170/HR2160: You can order the lter (type number HR2963) from your Philips dealer.
Never ll the lter beyond its metal part.
Do not use the lter to process hot ingredients.
Preparing the lter for use
1 Assemble the blender jar onto the motor unit (see section ‘Preparing the blender for use’ in
this chapter).
2 Put the lter in the blender jar (Fig. 8).
Make sure the lter is placed properly on the bottom of the jar.
The grooves of the lter and the ribs inside the blender jar help you put the lter in the right
position.
3 Close the lid.
Using the lter
1 Put the ingredients in the lter through the opening in the lid.
Cut fruits into smaller pieces and soak dried pulses, such as soy beans, before you process them in
the lter.
2 Add water or another liquid.
3 Put the measuring cup in the lid, set the control knob to the highest speed and let the
appliance run for max. 40 seconds.
ENGLISH10

4 Set the control knob to 0 and remove the blender jar from the motor unit.
5 Pour out the drink through the spout of the blender jar (Fig. 9).
Make sure the lid is closed and the measuring cup is in the lid.This prevents pulp and skins from
ending up in your drink.
6 For optimal results, put the jar with the remaining ingredients back onto the appliance,
without opening/removing the lid.Then let the appliance run for a few more seconds.
7 Pour out the rest of the drink.
8 When you have nished processing, set the control knob to 0 and unplug the appliance.
Tips
- When you process a large quantity, we advise you not to put all the ingredients in the lter at
the same time. Start to process a small quantity and let the appliance run for a few seconds.
Then switch off the appliance and add another small quantity. Repeat this procedure until you
have processed all the ingredients. Always keep the lid on the blender jar during processing.
- To get the best result when you make fruit juices and cocktails, add approx. 300ml water to
150g fruit.You can also use other liquids, e.g. to make cocktails.
- To make tomato juice, cut the tomatoes in four and drop the pieces through the opening in the
lid onto the rotating blades.
Mill (HR2168/HR2167/HR2161 only)
You can use the mill to grind and chop ingredients such as peppercorns, sesame seeds, rice, wheat,
coconut esh, nuts (shelled), coffee beans, dried soy beans, dried peas, cheese, breadcrumbs, etc.
Always process cloves, star anise and aniseed together with other ingredients. If processed
separately, these ingredients may attack the plastic materials of the appliance.
The mill is not suitable for chopping very hard ingredients like nutmeg and ice cubes.
Do not exceed the maximum level indicated on the mill beaker.
Preparing the mill for use
1 Put the ingredients in the mill beaker (Fig. 10).
Note: See the mill table at the end of this user manual for the recommended quantities and processing
times.
2 Screw the mill blade unit clockwise onto the mill beaker (Fig. 11).
3 Turn the assembled mill upside down and screw it clockwise onto the motor unit (Fig. 12).
Using the mill
1 Switch on the appliance.
We advise you to use the pulse setting or speed setting 5.
Never let the mill run for more than 30 seconds without interruption.
2 When you have nished processing, set the control knob to 0 and unplug the appliance.
3 To remove the mill from the motor unit, turn the mill anticlockwise.
Chopper (HR2168 only)
You can use the chopper to chop ingredients such as onions, meat, herbs, vegetables, fruit, chocolate,
rm cheese, baby food and nuts.
ENGLISH 11

HR2170/HR2161/HR2160:You can order the chopper (type number HR2965) from your Philips
dealer.
Do not use the chopper to mix liquids. Use the blender for this purpose.
1 Insert the coupling unit of the chopper into the bottom of the chopper bowl (1).Turn the
coupling unit anticlockwise to x it (2) (Fig. 13).
2 Place the chopper bowl (1) on the motor unit and turn it clockwise to x it (2). (Fig. 14)
3 Place the chopper blade unit in the chopper bowl (Fig. 15).
4 Put the ingredients in the chopper bowl (Fig. 16).
Note: See the chopper table at the end of this user manual for the recommended quantities and
processing times.
Do not exceed the maximum quantities indicated in the table.
Tip: Precut large pieces of food into pieces of 1-2cm.
5 Put the lid on the chopper bowl (1) and turn it clockwise to x it (2) (Fig. 17).
Note: Make sure the lid is properly xed before you switch on the appliance.
6 Switch on the appliance.
Note: If the appliance shakes because the food is not evenly distributed, put your hand on the lid.
Note:The chopper does its work in a few seconds. Never let it run longer than a few seconds.
7 When you have nished processing, set the control knob to 0 and unplug the appliance.
8 Turn the chopper bowl anticlockwise (1) and remove it from the motor unit (2). (Fig. 18)
9 Turn the coupling unit clockwise (1) and remove it from the bottom of the chopper
bowl (2) (Fig. 19).
10 Remove the lid and the blade unit from the chopper bowl.
Be careful when you handle the blade unit.The cutting edges of the blade unit are sharp.
11 Empty the chopper bowl.
Always remove blade unit from the chopper bowl and the chopper from the motor unit before
you empty the chopper bowl.
Cleaning (Fig. 20)
Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone
to clean the appliance.
1 Switch off and unplug the appliance.
2 Disassemble all removable parts before you clean them.
3 Clean the different parts of the appliance as indicated in the cleaning table.
Tips:
- Cleaning the appliance and its parts is easiest immediately after use.
- If necessary, clean the mesh of the lter with a very soft brush.
Quick-cleaning the blender jar
1 Fill the blender halfway with warm water and add a few drops of washing-up liquid.
ENGLISH12

2 Turn the control knob to the pulse setting a few times.
3 Detach the blender jar, empty it and rinse it under the tap.
Storage
1 To store the mains cord, push it into the cord storage compartment in the base (Fig. 21).
2 Store the appliance in a safe and dry place.
Environment
- Do not throw away the appliance with the normal household waste at the end of its life, but
hand it in at an ofcial collection point for recycling. By doing this, you help to preserve the
environment (Fig. 22).
Guarantee & service
If you need service or information or if you have a problem, please visit the Philips website at www.
philips.com or contact the Philips Consumer Care Centre in your country. You nd its phone
number in the worldwide guarantee leaet. If there is no Consumer Care Centre in your country, go
to your local Philips dealer.
Recipes
For more recipes, visit our website www.philips.com/kitchen.
Baby food
Ingredients
- 250g cooked chicken meat
- 250g cooked potatoes
- 250g cooked green beans
- 450ml milk
1 Assemble the blender jar onto the motor unit (see section ‘Using the appliance’).
2 Precut the ingredients into pieces of 2x2x2cm.
3 Put the ingredients in the blender jar.
4 Blend the ingredients for 25 seconds (or longer for a ner result).
Note: If you want to prepare a larger quantity, let the appliance cool down to room temperature before
you process the next batch of ingredients.
Soy milk
Ingredients
- 180g soy beans (soaked)
- 500ml warm water
1 Soak the soy beans in fresh water for at least 4 hours until they are soft.
2 Process the soaked soy beans with 500ml warm water in the blender for approx 60 seconds
until you have obtained a smooth liquid.
Note: If you want to prepare a larger quantity, let the appliance cool down to room temperature before
you process the next batch of ingredients.
ENGLISH 13

Five Spice powder
Ingredients
- 2g aniseed
- 2g star anise
- 2g Chinese cassia
- 2g cloves
- 2g Chinese liquorice
1 Put all ingredients in the mill beaker.
2 Grind the ingredients for 30 seconds.
Note: If you want to prepare a larger quantity, let the appliance cool down to room temperature before
you process the next batch of ingredients.
Thai massaman
Ingredients
- 20g shallots
- 15g garlic
- 7g galangal
- 9g lemongrass
- 2 cloves
- 1 tbsp coriander seeds
- 1 tbsp cumin seeds
- 3 dried chillies
- 5 peppercorns
- 1 tbsp shrimp paste
- 1 tbsp salt
1 Cut the galangal into slices of approx. 1cm.
2 Put all ingredients in the mill beaker.
3 Grind the ingredients for 30 seconds.
Note: If you want to prepare a larger quantity, let the appliance cool down to room temperature before
you process the next batch of ingredients.
Chilli paste
Ingredients
- 20g fresh red chillies
- 30g shallots
- 2 cloves garlic
1 Cut the chillies and shallots into large pieces that t into the chopper bowl.
2 Put the chillies, shallots and garlic in the chopper bowl.
3 Chop the ingredients for 30 seconds.
Note: If you want to prepare a larger quantity, let the appliance cool down to room temperature before
you process the next batch of ingredients.
ENGLISH14

Frequently asked questions
If the appliance does not work or does not work properly, rst check the list below or visit the
Philips website at www.philips.com/welcome. If the problem is not mentioned in this list or on the
internet, the appliance probably has a defect. In that case we advise you to take the appliance to
your dealer or to an authorised Philips service centre.
Question Answer
Why doesn’t the
appliance work?
This appliance is equipped with a safety system.The appliance does not
work if the blender jar with lid, the chopper bowl with lid (HR2168 only)
or the mill beaker (HR2168, HR2167, HR2161 only) are not assembled
correctly on the motor unit or are not assembled at all. Check if you
have assembled the blender jar with lid, the chopper bowl with lid or the
mill beaker correctly (see the various sections in this user manual). Set
the control knob to 0 rst.
Can I clean all
removable parts in the
dishwasher?
Yes, except the motor unit and the coupling unit of the chopper
(HR2168 only).
What does ‘pulse’
mean?
When you turn the control knob to the pulse setting, the appliance runs
at its highest speed as long as you keep the knob in this position. Use the
pulse setting if you want to have more control over the processing jobs.
Can I pour boiling hot
liquids into the
blender jar?
No, let hot liquids cool down to 80°C/175°F to avoid damage to the jar.
HR2171 only: You can pour hot ingredients (up to 100°C/ 212°F) in the
jar. Only touch the jar handle.The lid, bottom and outer surface of the jar
are hot.
Why does the motor
produce an unpleasant
smell during
processing?
It is common for a new appliance to give off an unpleasant smell or emit
some smoke the rst few times it is used. This phenomenon stops after
you have used the appliance a number of times.The appliance may also
give off an unpleasant smell or emit some smoke if it has been used too
long. In this case, set the control knob to 0 and let the appliance cool
down for 60 minutes.
The appliance stopped
running because the
blade unit is blocked.
What should I do?
Set the control knob to 0 and use a spatula to dislodge the ingredients
that block the blade unit.We also advise you to process a smaller
quantity.
Why does the fruit
juice or soy milk
contain a lot of pulp
or skins?
To prevent pulp and skins from ending up in your drink, make sure that
the lter (HR2168, HR2167 only) is placed properly in the jar, the lid
is closed and the measuring cup is inserted in the lid.
The blender jar leaks.
What should I do?
Set the control knob to 0 and pour out the ingredients. Make sure that
the sealing ring is properly in place on the blade unit.Also make sure
that the blade unit is assembled correctly.
Quantities and preparation times (Fig. 23)
ENGLISH 15

16
Pendahuluan
Selamat atas pembelian Anda dan selamat datang di Philips! Untuk memanfaatkan sepenuhnya
dukungan yang ditawarkan Philips, daftarkan produk Anda di www.philips.com/welcome.
Alat ini dilengkapi dengan sistem pengaman bawaan yang mencegah alat berfungsi jika aksesori
tidak dipasang dengan benar atau sama sekali tidak dipasang.
Gambaran umum (Gbr. 1)
1 Gelas ukur
2 Lubang pada tutup
3 Tutup tabung blender plastik
4 Indikator ukuran
5 Tabung blender plastik (HR2168/HR2167/HR2161/HR2160)
6 Unit pisau blender plastik
7 Unit motor unit dengan kenop kontrol
8 Tombol es
9 Setelan kecepatan
10 Filter (HR2168/HR2167 saja)
11 Setelan pulsa
12 Unit pisau blender kaca
13 Indikator ukuran
14 Tabung blender kaca (HR2170 saja)
15 Tutup tabung blender kaca
16 Lubang pada tutup
17 Gelas ukur
18 Lubang pada tutup
19 Tutup tabung baja anti karat
20 Indikator ukuran
21 Tabung baja anti karat (HR2171)
22 Unit sambungan
23 Mangkuk perajang (HR2168 saja)
24 Unit pisau perajang
25 Tutup pencacah
26 Gelas gilingan (HR2168/HR2167/HR2161 saja)
27 Unit pisau penggiling
Penting
Bacalah petunjuk penggunaan ini dengan saksama sebelum Anda menggunakan alat dan simpanlah
sebagai referensi di masa mendatang.
Umum
Bahaya
- Jangan sekali-kali merendam unit motor dalam air atau cairan lain, membilasnya di bawah keran.
Gunakan hanya kain lembab untuk membersihkan unit motor.
Peringatan
- Periksalah apakah voltase pada alat sesuai dengan voltase listrik di rumah Anda
sebelum menghubungkan alat.
- Jika kabel listrik rusak, maka harus diganti oleh Philips, pusat layanan resmi Philips atau orang yang
mempunyai keahlian sejenis agar terhindar dari bahaya.
- Jangan menggunakan alat jika steker, kabel listrik atau komponen lain ada yang rusak.
- Jangan sekali-kali menggunakan tabung blender, gelas gilingan (hanya HR2168, HR2167, HR2161)
atau mangkuk perajang (hanya HR2168) untuk menghidupkan dan mematikan alat.
INDONESIA

- Jangan sekali-kali meninggalkan alat yang sedang bekerja tanpa ditunggui.
- Alat ini tidak dimaksudkan untuk digunakan oleh orang (termasuk anak-anak) dengan cacat sik,
indera atau kecakapan mental yang kurang, atau kurang pengalaman dan pengetahuan, kecuali
jika mereka diberikan pengawasan atau petunjuk mengenai penggunaan alat oleh orang yang
bertanggung jawab bagi keselamatan mereka.
- Anak kecil harus diawasi untuk memastikan mereka tidak bermain-main dengan alat ini.
- Jangan menyentuh pisau-pisaunya, khususnya bila alat sudah dihubungkan ke stopkontak. Pisau-
pisau ini sangat tajam.
Perhatian
- Cabut selalu steker alat dari listrik sebelum Anda memasang, membongkar, membersihkan atau
menyesuaikan komponennya.
- Jangan sekali-kali menggunakan aksesori atau komponen apa pun dari produsen lain atau yang
tidak secara khusus direkomendasikan oleh Philips. Jika Anda menggunakan aksesori atau
komponen tersebut, garansi Anda tidak berlaku.
- Jangan melampaui tanda maksimum pada tabung blender, gelas gilingan (hanya HR2168, HR2167,
HR2161) dan mangkuk perajang (hanya HR2168).
- Jangan melampaui takaran maksimum dan waktu pengolahan yang ditunjukkan dalam tabel
bersangkutan.
- Alat hanya dapat dihidupkan jika tabung blender, gelas gilingan (hanya HR2168, HR2167,
HR2161) atau mangkuk perajang (hanya HR2168) telah dipasang pada unit motor dengan benar.
Blender
Peringatan
- Jangan sekali-kali memasukkan jari atau benda lainnya ke dalam tabung blender sewaktu alat
sedang bekerja.
- Pastikan unit pisau telah terpasang erat pada tabung blender sebelum memasang tabung blender
pada unit motor.
- Jangan menyentuh tepi tajam pada unit pisau blender saat Anda memegang atau
membersihkannya. Pisau ini sangat tajam dan mudah melukai jari Anda.
- Jika unit pisau macet, cabut steker dari stopkontak sebelum mengeluarkan bahan makanan yang
mengganjal pisau.
Perhatian
- Jangan sekali-kali mengisi tabung blender dengan bahan makanan yang lebih panas dari 80ºC/
175°F.
- HR2171: Jangan sekali-kali mengisi tabung blender baja anti karat dengan bahan makanan yang
lebih panas dari 100°C/212°F.
- Agar jangan tumpah, jangan memasukkan cairan ke dalam tabung lebih dari 1,5 liter, khususnya
saat mengolah pada kecepatan tinggi. Jangan memasukkan lebih dari 1 liter ke dalam tabung
blender saat mengolah cairan yang panas atau bahan yang menimbulkan busa.
- Jika makanan lengket ke dinding tabung blender, matikan alat dan cabut stekernya. Kemudian
gunakan spatula untuk melepas makanan tersebut dari dindingnya.
- Pastikan selalu tutup blender dirapatkan/terpasang dengan benar dan gelas ukurnya dimasukkan
dengan benar dalam tutupnya sebelum Anda menghidupkan alat.
- Hanya HR2171:Tabungnya terbuat dari baja anti karat. Hindari tabung terjatuh di lantai keras.
Hindari kejutan panas yang berlebihan.
- HR2170 saja:Tabungnya terbuat dari kaca sehingga dapat pecah. Jangan jatuhkan tabung pada
lantai keras. Juga hindari kejutan panas yang berlebihan. Jika tabungnya sangat dingin, bilaslah
dengan air hangat-hangat kuku sebelum Anda menuang cairan panas ke dalamnya. Jika tabung
kacanya retak, hentikan penggunaannya.
INDONESIA 17

Gilingan (HR2168/HR2167/HR2161 saja)
Peringatan
- Pastikan unit pisau telah terpasang erat pada gelas gilingan sebelum memasang gelas gilingan
pada unit motor.
- Jangan menyentuh tepi tajam pada unit pisau gilingan saat Anda memegang atau
membersihkannya. Pisau ini sangat tajam dan mudah melukai jari Anda.
- Jangan sekali-kali menggunakan gilingan untuk menghaluskan bahan-bahan yang sangat keras
seperti biji pala dan es batu.
Perhatian
- Jangan sekali-kali menggunakan lebih dari 30 detik tanpa henti. Biarkan gilingan dingin dulu hingga
ke suhu kamar di antara siklus pengolahan.
- Olahlah selalu cengkeh, adas bintang dan adas manis bersama-sama bahan lainnya. Jika diolah
secara terpisah, bahan-bahan ini dapat merusak bahan plastik alat itu.
- Gelas penggiling dapat berubah warna bila penggiling digunakan untuk mengolah bahan-bahan
seperti cengkeh, adas dan kayu manis.
- Gilingan tidak cocok untuk mencacah daging mentah. Sebaiknya gunakan blender atau perajang.
- Jangan menggunakan penggiling untuk mengolah cairan seperti jus buah.
Perajang (HR2168 saja)
Peringatan
- Pastikan unit sambungan telah terpasang erat pada mangkuk perajang sebelum memasang
perajang pada unit motor.
- Jangan menyentuh tepi tajam pada unit pisau perajang saat Anda memegang atau
membersihkannya. Pisau ini sangat tajam dan mudah melukai jari Anda.
- Jangan sekali-kali memasukkan jari atau benda lainnya ke dalam mangkuk perajang sewaktu alat
sedang bekerja.
- Jika unit pisau macet, cabut steker dari stopkontak sebelum mengeluarkan bahan makanan yang
mengganjal pisau.
Perhatian
- Pastikan selalu tutupnya terpasang dengan benar pada mangkuk perajang sebelum Anda
menghidupkan alat.
- Jika makanan lengket ke dinding mangkuk perajang, matikan alat dan cabut stekernya. Kemudian
gunakan spatula untuk melepas makanan tersebut dari dindingnya.
Filter (HR2168/HR2167 saja)
Perhatian
- Jangan sekali-kali menggunakan lter untuk mengolah bahan yang lebih panas dari 80°C/175°F.
- Jangan berlebihan mengisi lter. Jangan mengisi lter melebihi bagian logamnya.
- Pastikan selalu tutup tabung blender dirapatkan/terpasang dengan benar dan gelas
ukur dimasukkan dengan benar dalam tutupnya sebelum Anda menghidupkan alat.
- Potong buah menjadi kecil-kecil sebelum memasukkannya ke dalam saringan.
- Rendam bahan makanan kering, seperti kacang kedelai, sebelum memasukkannya ke dalam
saringan.
Medan elektromagnet (EMF)
Alat dari Philips ini telah mematuhi semua standar yang berkenaan dengan medan elektromagnet
(EMF). Jika ditangani dengan benar dan sesuai dengan instruksi yang diberikan dalam petunjuk
penggunaan ini, alat ini aman digunakan berdasarkan pada bukti ilmiah yang kini tersedia.
INDONESIA18

Kunci pengaman terpasang
Fitur ini memastikan bahwa Anda hanya dapat menghidupkan alat jika telah memasang tabung
blender dan tutupnya, gelas gilingan atau mangkuk perajang dan tutupnya (hanya HR2168) pada unit
motor dengan benar. Jika tabung blender dan tutupnya, gelas gilingan atau mangkuk perajang dan
tutupnya telah dipasang dengan benar, kunci pengaman bawaan akan terbuka.
Pelindung sirkuit motor
Alat ini dilengkapi dengan pelindung sirkuit motor yang akan mematikan motor jika motor macet
(dapat terjadi saat melakukan pekerjaan pengolahan berat atau jika alat tidak dipakai sesuai dengan
instruksi pada petunjuk pengguna). Jika ini terjadi, pertama matikan alat lalu cabut steker dan biarkan
dingin dulu hingga ke suhu kamar. Kemudian periksa apakah takaran bahan yang Anda olah tidak
melebihi yang disebutkan di dalam petunjuk pengguna atau ada yang memblokir unit pisau.
Sebelum menggunakan alat pertama kali
Bersihkan dengan saksama bagian-bagian yang akan bersentuhan dengan makanan sebelum alat
digunakan untuk pertama kali (lihat bab ‘Membersihkan’).
Menggunakan alat
Blender
,Blender dimaksudkan untuk:
- Memblender bahan cair seperti susu, saus, jus buah, sup, minuman campuran, shakes.
- Mencampur bahan makanan lembut seperti adonan kue penekuk atau mayones.
- Menghaluskan bahan makanan masak, misalnya untuk membuat makanan bayi.
- Hanya HR2171: Memblender sup panas hingga 100°C/212°F.
Menyiapkan blender untuk penggunaan
1 Putar unit pisau blender searah jarum jam pada tabung blender (Gbr. 2).
2 Pasang tabung blender bersama unit pisau yang telah terpasang padanya ke unit motor dan
putar searah jarum jam hingga terkunci ke posisinya (Gbr. 3).
3 Masukkan bahan-bahan ke dalam tabung blender.
Biarkan bahan yang panas menjadi dingin terlebih dahulu sebelum memasukkannya ke dalam tabung
blender (suhu maks. 80°C/175°F). Hanya HR2171: Suhu maks. untuk memproses bahan-bahan dalam
tabung blender baja anti karat adalah 100°C/212°F.
4 Hanya HR2170: Kencangkan tutupnya pada tabung dengan menekannya ke tabung dan
memutarnya searah jarum jam. (Gbr. 4)
Catatan: Pastikan ayakan dalam tutupnya dipasang di depan cerat tabung agar bisa menuang isinya.
5 Hanya HR2171/HR2168/HR2167/HR2161/HR2160: Rapatkan tutupnya.
6 Masukkan gelas ukur ke dalam tutupnya (Gbr. 5).
Catatan: Untuk melepas blender, ikuti petunjuk di atas dalam urutan dan arah terbalik.
Menggunakan blender
Jangan memasukkan jari atau benda lainnya (misalnya spatula) ke dalam tabung, pada saat blender
sedang bekerja.
Hanya HR2171: Sentuh hanya pegangan tabung saat bahan makanan yang panas ada dalam tabung.
Tutup, bagian bawah dan permukaan luar tabung panas.
INDONESIA 19

Jangan melampaui batas maksimum yang tertera pada tabung blender. Hanya HR2171:Anda bisa
melihat ukurannya di dalam tabung.
1 Masukkan steker listrik pada stopkontak dinding.
2 Hidupkan alat. (Gbr. 6)
Catatan: Lihat tabel blender di akhir petunjuk pengguna ini untuk takaran, setelan kecepatan dan waktu
pengolahan yang dianjurkan.
- Untuk mengolah bahan pada kecepatan tertentu, putar kenop kontrol ke setelan kecepatan yang
diinginkan.
Jangan biarkan alat beroperasi lebih dari 2 menit untuk setiap kalinya. Biarkan alat dingin dulu
hingga ke suhu kamar sebelum Anda melanjutkan pengolahan.
- Untuk mengolah bahan sebentar saja, putar kenop kontrol ke setelan pulsa (P) beberapa kali.
Jangan sekali-kali menggunakan setelan pulsa lebih lama dari beberapa detik setiap kalinya.
- Untuk menghancurkan es, tekan tombol ICE.
Tip:Anda bisa melihat hasilnya melalui tutup transparan.
3 Setelah Anda selesai mengolah, setel kenop kontrol ke 0 dan cabut steker alat dari
stopkontak.
Selalu setel kenop kontrol ke 0 sebelum membuka tutupnya.
Tip
- Agar jangan tumpah, jangan masukkan cairan ke dalam tabung lebih dari 1,5 liter, khususnya saat
mengolah pada kecepatan tinggi. Jangan memasukkan lebih dari 1 liter ke dalam tabung blender
saat mengolah cairan yang panas atau bahan yang menimbulkan busa.
- Anda dapat menggunakan lubang pada tutupnya untuk menambahkan bahan saat alat sedang
beroperasi (Gbr. 7).
- Jangan mengolah bahan makanan kering selama lebih dari 1 menit.
- Potong kecil-kecil bahan yang padat sebelum memasukkannya dalam tabung blender. Jangan
mengolah jumlah besar dalam waktu yang sama. Olah bahan ini sedikit-sedikit.
- Jika Anda tidak puas dengan hasilnya saat memblender bahan makanan padat, gunakan setelan
pulsa beberapa kali agar blender berjalan sebentar. Jika Anda ingin menggunakan spatula, matikan
alat, buka tutupnya kemudian aduklah bahan tersebut. Anda juga dapat mengeluarkan sebagian isi
tabung dan mengolah jumlah yang lebih kecil.
- Untuk menghancurkan es batu, masukkan maks. 5 bongkah kecil es batu setiap kalinya ke dalam
tabung dan tekan tombol ICE beberapa kali.
Hanya HR2171:Tabungnya terbuat dari baja anti karat. Hindari tabung terjatuh di lantai keras.
Hindari kejutan panas yang berlebihan. HR2170 saja:Tabungnya terbuat dari kaca sehingga dapat
pecah. Jangan jatuhkan tabung pada lantai keras. Juga hindari kejutan panas yang berlebihan. Jika
tabungnya sangat dingin, bilaslah dengan air hangat-hangat kuku sebelum Anda menuang cairan
panas ke dalamnya. Jika tabung kacanya retak, hentikan penggunaannya.
Filter (HR2168/HR2167 saja)
Anda dapat menggunakan lter untuk membuat saus, jus buah segar atau koktail yang ekstra lembut.
Semua biji dan kulit akan tersaring.
HR2170/HR2160: Anda dapat memesan lter (nomor tipe HR2963) dari dealer Philips Anda.
Jangan sekali-kali mengisi lter melebihi bagian logamnya.
Jangan menggunakan lter untuk mengolah bahan makanan yang panas.
INDONESIA20