Philips CE130/51 User manual

CE130
3
Register your product and get support at
www.philips.com/welcome
EN User manual
RU Руководство пользователя 25

3
English
EN
8 Adjust system settings 19
Turn beep sound on/off 19
Select blackout setting 19
Turn demo mode on/off 19
Reset 19
9 Additional information 20
Detach the front panel 20
Replace fuse 20
Remove the unit 20
10 Product information 21
11 Troubleshooting 22
12 Glossary 23
Contents
1 Important 4
Safety 4
Notice 4
2 Your car audio system 6
Introduction 6
What’s in the box 6
Overview of the main unit 7
3 Get started 8
Install the car audio 8
Turn on 12
Set clock 12
4 Listen to radio 13
Tune to a radio station 13
Store radio stations in memory 13
Tune to a preset station 13
5 Play with RDS 14
Turn on RDS 14
Select program type 14
Select alternate frequencies 15
Receive traffic announcement 15
Set RDS clock 15
6 Play audio files 16
Play from USB 16
Insert a card 16
Play options 17
7 Adjust sound 18
Adjust volume 18
Mute 18
Tunr on/off Max Sound 18
Turn Dynamic Bass Boost (DBB)
on/off 18
Select preset equalizer 18
Switch music listening zone 18
Other sound settings 18

4
Do not place any sources of danger on•
the apparatus (e.g. liquid filled objects,
lighted candles).
Notice
The making of unauthorized copies of
copy-protected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
Windows Media and the Windows logo are
trademarks, or registered trademarks of
Microsoft Corporation in the United States
and/or other countries.
This apparatus includes this label:
Recycling
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When you see the crossed-out wheel bin
symbol attached to a product, it means the
product is covered by the European Directive
2002/96/EC:
1 Important
Safety
Read and understand all instructions•
before you use your apparatus. If damage
is caused by failure to follow instructions,
the warranty does not apply.
This apparatus is designed for negative•
ground (earth) 12 V DC operation only.
To ensure safe driving, adjust the volume•
to a safe and comfortable level.
Improper fuses can cause damage or•
fire. When you need to change the fuse,
consult a professional.
Use only the supplied mounting hardware•
for a safe and secure installation.
To avoid short circuit, do not expose the•
apparatus, remote control or remote
control batteries to rain or water.
Never insert objects into the ventilation•
slots or other openings on the apparatus.
Clean the apparatus and frame with a•
soft, damp cloth. Never use substances
such as alcohol, chemicals or household
cleaners on the apparatus.
Never place any objects other than discs•
into the apparatus.
Never use solvents such as benzene,•
thinner, cleaners available commercially,
or anti-static sprays intended for discs.
Visible and invisible laser radiation when•
open. Avoid exposure to beam.
Risk of damage to the apparatus screen!•
Never touch, push, rub or strike the
screen with any object.
Caution
Use of controls or adjustments or•
performance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.
The apparatus shall not be exposed to•
dripping or splashing.
EN

5
Specifications are subject to change without
notice. Trademarks are the property of
Koninklijke Philips Electronics N.V. or their
respective owners. Philips reserves the right
to change products at any time without being
obliged to adjust earlier supplies accordingly.
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products. The correct
disposal of your old product helps prevent
potentially negative consequences on the
environment and human health.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed of with normal household
waste.
Please inform yourself about the local rules on
separate collection of batteries. The correct
disposal of batteries helps prevent potentially
negative consequences on the environment
and human health.
This product complies with the radio
interference requirements of the European
Community.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and
old equipment.
Any changes or modifications made to this
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
2011 © Koninklijke Philips Electronics N.V. All
rights reserved.
English
EN

6
What’s in the box
Check and identify the contents of your package:
aMain unit (with a sleeve)
bCarrying case (includes the front
panel)
cTrim plate
dISO male connector
eRubber cushion
fScrews x 4 pcs
gDisassembly tools x 2 pcs
hUser manual
iQuick start guide
a
e
cd
b
i
h
g
f
2 Your car audio
system
Congratulations on your purchase, and
welcome to Philips!To fully benefit from the
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With the in-car audio system, you can enjoy
your drive while listening to:
FM or AM (MW) radio•
Audio from USB devices•
Audio from SD/SDHC card•
Audio from other external devices•
The unit supports the following media format:
EN

7
Overview of the main unit
a
Unlock the panel.•
b
 6281'
Turn on or off Maximizing volume.•
cBAND/
Select tuner band.•
Return to previous menu.•
nml k j gie
ab c d
ohf
pq
English
EN
d
USB socket.•
eMP3 LINK
Connect external audio device.•
f+SONG/FOLDER -/PRESET
Select preset radio station.•
Search for track/folder.•

8
3 Get started
Caution
Use the controls only as stated in this user•
manual.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of your apparatus.The
model number and serial number are on the
bottom of your apparatus.Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
Install the car audio
These instructions are for a typical installation.
However, if your car has different requirements,
make the corresponding adjustment. If you have
any questions regarding installation kits, consult
your Philips car audio dealer.
Caution
This unit is designed for negative ground•
(earth) 12 V DC operation only.
Always install this unit in the car dashboard.
•
Other locations can be dangerous as the rear
of the unit heats up during use.
To avoid short-circuit: before you connect,
•
ensure that the ignition is off.
Ensure that you connect the yellow and red
•
power supply leads after all other leads are
connected.
Ensure that all loose leads are insulated with
•
electrical tape.
Ensure that the leads do not get caught under
•
screws orin parts that will move (e.g. seat rail).
Ensure that all ground (earth) leads are run to
•
a common ground (earth) point.
Use only the supplied mounting hardware for a
•
safe and secure installation.
Improper fuses can cause damage or fire.
•
When you need to change the fuse, consult a
professional.
gOPTIONS/CLOCK
Access option menu.•
View clock.•
h/
Tune for radio station.•
Skip/search for track.•
Fast forward/backward playback.•
iDISP
Display current status.•
jMENU
Access system menu.•
k/
Turn the unit on or off.•
Confirm selection.•
Mute or unmute sound.•
Rotate to adjust settings.•
lEQ AUDIO
Select equalizer (EQ) setting.•
Access audio setting menu.•
mSOURCE
Select audio source.•
nZONE
Switch the music listening zone.•
oDBB
Turn on/off Dynamic Bass Boost•
(DBB) sound.
pRESET
Restore default settings.•
qSD card slot
EN

9
Note on the power supply lead (yellow)
When you connect other devices to this•
system, ensure that the rating of the car
circuit is higher than the total fuse value
of all the connected devices.
Notes on speaker connection
Never connect speaker wires to the•
metal body or chassis of the car.
Never connect speaker wires with stripes•
to one another.
Connect wires: ISO male connectors
Caution
Ensure that all loose leads are insulated with•
electrical tape.
Note
Consult a professional to connect CE130 as•
instructed below.
1Connect the supplied male connector to
the unit.
2Check the car’s wiring carefully and
connect them to the supplied male
connector.
Note
Risk of danger! Please consult a professional to•
perform the below steps!
English
EN
1 Green/black strip Left speaker (Rear)
2 White/black strip Left speaker (Front)
3 Gray/black strip Right speaker (Front)
4 Purple/black strip Right speaker (Rear)
e Red Ignition key +12V DC
when ON/ACC
f Blue Motor/electric antenna
relay control lead/
Amplifier relay control
lead
gBlack Ground
h Yellow To the +12V car
battery which is
energized at all times
b
a
c
d
aa
bcd
ab
ef
cd
gh
b
c
d

10
2Ensure that car dashboard opening is
within these measurements:
3Remove the mounting sleeve with the
supplied disassembly tools.
183 mm
53mm
5mm
3Connect the antenna and amplifier as
illustrated, if applicable.
Connector Connect to
1 ANTENNA Antenna
2 FRONT LINE OUT
R (Socket)
Front right
speaker
3 FRONT LINE OUT
L (Socket)
Front left
speaker
4 REAR LINE OUT R
(Socket)
Rear right
speaker
5 REAR LINE OUT L
(Socket)
Rear left
speaker
Tip
The pin arrangement for the ISO connectors•
depends on the type of vehicle you drive. Be
sure to make proper connections to prevent
damage to the unit.
Mount into the dashboard
1If the car does not have an on-board
drive or navigation computer, disconnect
the negative terminal of the car battery.
If you disconnect the car battery in•
a car that has an on-board drive or
navigation computer, the computer
may lose its memory.
If the car battery is not disconnected,•
to avoid short-circuit, ensure that the
bare wires do not touch each other.
L
R
Rear Front
EN

11
6Slide the unit into the dashboard until you
hear a click sound.
7Reconnect the negative terminal of the
car battery.
4Install the sleeve into the dashboard and
bend the tabs outward to fix the sleeve.
Note
If the unit is not fixed by sleeve but by the•
supplied screws, skip this step.
5Place the supplied rubber cushion over
the end of the mounting bolt.
183 mm
53.5 mm
English
EN

12
Set clock
1Press MENU.
2Press /repeatedly until the current
time is displayed.
3Rotate clockwise to set hour.
4Press to confirm.
5Rotate counterclockwise to set minute.
6Press to confirm.
View clock
1Press and hold OPTIONS repeatedly
until the clock is displayed.
Attach the front panel
1Attach the trim plate.
2Insert the right side of the panel in the
chassis until it is correctly engaged.
3Press the left side of the panel until it is
locked into place.
Turn on
1Press to turn on the unit.
To turn off the unit, press• for over
3 seconds.
1
2
EN

13
Store radio stations in
memory
You can store up to 6 stations in each band.
Store stations automatically
1Press OPTIONS repeatedly until
[AUTO-STORE] displays.
2Press to confirm.
The six strongest stations of the»
selected band are saved in preset
channel automatically.
Store stations manually
1Tune to a station that you want to store.
(see ‘Tune to a preset station’ on page 13)
2Press and hold +/PRESET or -/RRESET to
enter storing mode.
The preset number starts to blink..»
3Press +/PRESET or -/RRESET to select
radio channel.
4Press to confirm.
The station is saved in the selected»
channel.
The preset number on LCD screen»
lights up and remains on.
Tune to a preset station
1Press BAND/ to select band.
2Press +/PRESET or -/RRESET to select
the preset station.
4 Listen to radio
Tune to a radio station
1Press SOURCE repeatedly to select radio
mode.
2Press BAND/ to select band: [FM1],
[FM2], [FM3], [AW1] or [AW2] .
3Press or to tune to a radio station
manually.
The radio station is broadcast.»
To search for a radio station»
automatically, press or for over
3 seconds.
Select tuner region
You can select suitable country/region of the
radio.
1Press SOURCE to select Radio mode.
2Press MENU.
3Press /repeatedly until [AREA]
displays.
4Rotate to select:
• [USA]
• [LATIN]
• [Europe]
• [OIRT]
Select tuner sensitivity
To receive more radio stations or only
stations with strong signal, you can adjust the
tuner sensitivity.
1Press OPTIONS repeatedly to select
[LOCAL SEEK].
2Rotate to select a setting:
• [LOCAL SEEK ON]: Only stations
with strong signal can be broadcast.
• [LOCAL SEEK OFF]: Stations with
strong and weak signals can be
broadcast.
English
EN

14
Item Program type Description
1 NEWS News services
2 AFFAIRS Politics and current
affairs
3 INFO Special information
programs
4 SPORT Sports
5 EDUCATE Education and
advanced training
6 DRAMA Radio plays and
literature
7CULTURE Culture, religion and
society
8SCIENCE Science
9VARIED Entertainment
programs
10 POP M Pop music
11 ROCK M Rock music
12 EASY M Light music
13 LIGHT M Light classical music
14 CLASSICS Classical music
15 OTHER M Special music
programs
16 WEATHER Weather
17 FINANCE Finance
18 CHILDREN Children’s programs
19 SOCIAL Social Affairs
20 RELIGION Religion
21 PHONE IN Phone In
22 TRAVEL Travel
23 LEISURE Leisure
24 JAZZ Jazz Music
25 COUNTRY Country Music
26 NATION M National Music
27 OLDIES Oldies Music
28 FOLK M Folk Music
29 DOCUMENT Documentary
30 TEST Alarm Test
31 ALARM Alarm
5 Play with RDS
The RDS (Radio Data System) function
operates only in areas with FM stations
broadcasting RDS signals. If you tune to an RDS
station, an RDS icon and information about the
presenter, station or program is displayed.
Turn on RDS
Note
The default setting for RDS is off.•
1Press MENU repeatedly until [RDS] is
displayed.
2Rotate to select [RDS ON]:
The RDS function is turned on.»
Select program type
Before tuning to RDS stations, you can select
program type and let the unit search only for
programs of the selected category.
1Press OPTIONS repeatedly until [PTY] is
displayed.
2Turn to select a type, then press to
confirm.
EN

15
Set RDS clock
You can use time signal that is broadcast
together with the RDS signal to set the clock of
the unit automatically.
1Press MENU repeatedly until [CT] is
displayed.
2Rotate to select a setting:
• [CT ON]: Turn on the RDS clock.
Time shown on the unit synchronizes
with that on the RDS station.
• [CT OFF]: Turn off the RDS clock.
Tip
The accuracy of the transmitted time depends•
on the RDS station that transmits the time
signal.
Select alternate frequencies
If the radio signal is poor, turn on AF (Alternate
Frequency) to search for another station with
stronger signal.
1Press MENU or OPTIONS repeatedly
until [AF] is displayed.
2Rotate to select a setting:
• [AF ON]: Turn on the AF mode.
• [AF OFF]: Turn off the AF mode.
Set region for AF tuning
You can define AF tuning region:
[REG
ON]
Only stations in current region
can be tuned to automatically.
[REG
OFF]
All stations can be tuned to
automatically.
1Press MENU repeatedly until [REG]
(Regional Radio) is displayed.
2Rotate to select a setting.
Receive traffic announcement
If you do not want to miss traffic
announcement when enjoying music, turn on
the TA (Traffic Announcement) function.
1Press MENU or OPTIONS repeatedly
until [TA] is displayed.
2Rotate to select a setting:
• [TA ON]: When there is traffic
announcement, the unit switches
to the tuner mode (regardless of
the current mode) and begins to
broadcast the traffic conditions.
When the traffic announcement
is over, it returns to the previous
mode.
• [TA OFF]: Traffic announcement
does not cut in.
English
EN

16
Insert a card
Note
This unit supports SD and SDHC cards.•
1Press to release the panel.
2Push the left side of the panel rightward,
then pull the panel towards you to
disengage it from the chassis.
3Insert the card into the card slot.
The unit starts playing from the card»
automatically.
Remove the card
1Press to turn off the unit.
2Press the card until you hear a click
sound.
The card is now disengaged.»
3Remove the card.
6 Play audio files
Play from USB
Note
Ensure that the USB device contains playable•
music.
Insert the USB device
1Slide the USB socket cover marked
to the left.
2Insert the USB device into the USB
socket.
The unit starts to play from the USB»
device automatically.
Remove the USB device
1Press to turn off the unit.
2Remove the USB device.
EN

17
Repeat play
1During play, press OPTIONS repeatedly
until [REPEAT] is displayed.
2Rotate to select a setting.
• [REPEAT ALL]: play all tracks repeatedly.
• [REPEAT TRK]: play current track
repeatedly.
• [REPEAT FLD]: play all tracks in the
current folder repeatedly.
Shuffle play
You can play the tracks in random order:
1During play, press OPTIONS repeatedly
until [RANDOM] is displayed.
2Rotate to select a setting:
• [RANDOM OFF]: Turn off random
play.
• [RANDOM FLD]: start random play
for all tracks in the current folder.
• [RANDOM ALL]: start random play
for all tracks.
Intro play
You can play the first 10 seconds of each track.
1During play, press OPTIONS repeatedly
until [INTRO] is displayed.
2Rotate to select a setting:
• [INTRO OFF]: Cancel intro play and
start normal play.
• [INTRO FLD]: Start introl play in the
current folder.
• [INTRO ALL]: Play the first 10
seconds of each track.
Connect external sound source
1Connect the external sound source to
MP3 LINK socket with a 3.5 mm cable.
2Press SOURCE repeatedly until [MP3
LINK] is displayed.
3Operate the external component (refer
to the instructions supplied with the
external component).
Play options
To pause, press• .
To resume play, press• again.
To skip to the previous/next track, press•
/ .
To search backward/forward rapidly•
within the current track, press /for
3 seconds.
Search for an MP3/WMA track
Search within the current folder
1Press +SONG.
The name of the current track is»
displayed.
2Rotate to select another track in current
folder.
3Press to confirm.
Search in other folder
1Press FOLDER -.
The name of the current folder is»
displayed.
2Rotate to navigate through all folders.
3Press to access the selected folder.
4Rotate to select a track in the folder.
5Press to start play.
Tip
To go back to upper level of a folder, press• .
View play information
1During playing, press DISP repeatedly to
view:
Track number and elapsed play time•
Folder•
File•
Title•
Album•
Artist•
English
EN

18
2Press EQ/Audio again to select a preset
EQ setting:
• [OPTIMAL] (optimal)
• [FLAT] (flat)
• [POP] (pop)
• [USER] (user)
• [TECHNO] (techno)
• [ROCK] (rock)
• [CLASSIC] (classic)
• [JAZZ] (jazz)
Switch music listening zone
Philips’ innovative Zone technology enables
driver or passengers to enjoy music with the
best speakers balance and experience more
vivid spacial effect as the artist is intended to
create.You can switch the music listening zone
from driver to passengers for the best speaker
sound settings in car.
1Press ZONE.
The current setting is displayed.»
2Rotate to select a setting:
• [ZONE ALL]
• [FRONT]
• [F. LEFT] (Front left)
• [F. RIGHT] (Front right)
3Press OK to confirm the selection.
Other sound settings
You can also adjust the preset EQ/Audio
settings.
1Press EQ/Audio for 3 seconds.
2Press /repeatedly to select the item
to be adjusted:
• [BAS] (Bass) range: -7 to +7
• [TRE] (Treble) range: -7 to +7
• [BAL] (Balance) range: 12L to 12R.
(L= left speaker, R = right speaker)
• [FAD] (Fader) range: 12R to 12F. (R
= rear speaker, F = front speaker)
3Rotate to select a value/option.
7 Adjust sound
Adjust volume
1Turn clockwise/counterclockwise to
increase/decrease volume.
Mute
You can turn off the sound of your audio.
1During play, press .
To resume sound, press• again.
Tunr on/off Max Sound
1Press
 6281'
.
The current setting is displayed.»
»[MAX ON]:The maximum sound
(max sound) function is on.
»[MAX OFF]:The maximum sound
function is off.
Turn Dynamic Bass Boost
(DBB) on/off
1Press DBB and the current setting is
displayed:
»[DBB ON] :The Dynamic Bass Boost
(DBB) function is on.
»[DBB OFF] :The DBB function is off.
2Press DBB again to change the DBB
setting.
Select preset equalizer
1Press EQ/Audio.
Current Equalizer setting is displayed.»
EN

19
Turn demo mode on/off
1Press MENU.
2Press /repeatedly until [DEMO]
displays.
3Rotate to select a setting:
• [DEMO ON] : Turn on the demo
mode. When the unit is idle for
more than 10 seconds, all functions
are displayed.
• [DEMO OFF] : Turn off the demo
mode.
Reset
You can reset the unit to its default setting.
1Detach the front panel.
2Press the reset button by using a ball-
point pen or a similar tool.
Preset adjustments such as preset»
channels and sound adjustments are
erased.
RESET
8 Adjust system
settings
Turn beep sound on/off
Each time you press a button, the unit beeps.
You can turn on or off this beep sound.
1Press MENU.
2Press /repeatedly until [BEEP]
displays.
3Rotate to select a setting:
• [BEEP ON]: Turn on the beep
sound.
• [BEEP OFF]: Turn off the beep
sound.
Select blackout setting
You can set the screen to turn off automatically
after the unit is idle for 10 or 20 seconds.
1Press MENU.
2Press /repeatedly until [BKO] is
displayed.
3Rotate to select a setting:
• [BKO 10 S] : Turn off the screen
automatically 10 seconds after last
operation.
• [BKO 20 S] : Turn off the screen
automatically 20 seconds after last
operation.
• [BKO OFF] : Never turn off the
screen.
English
EN

20
Replace fuse
If the fuse is damaged,
1Check the electric connection.
2Buy a fuse that matches the voltage of the
damaged fuse.
3Replace the fuse.
Note
If the new fuse gets damaged again, there may•
be an internal malfunction. Consult your Philips
dealer.
Remove the unit
You can remove the unit from the dashboard.
1Detach the front panel and the trim plate.
2Pull out the unit by using the disassembly
tools.
9 Additional
information
Detach the front panel
You can detach the front panel to deter theft.
1Press to release the panel.
2Push the left side of the panel rightward.
3Pull the panel towards you to disengage it
from the chassis.
4Store the panel in the supplied carry case
to protect it from dirt or damage.
EN

21
Compatible USB devices:
USB flash memory: USB 1.1 host•
with interface reading all speed
support (1.1, 2.0)
USB flash players: USB 1.1 host with•
interface reading all speed support
(1.1, 2.0)
Memory cards (SD / SDHC)•
Supported formats:
USB or memory file format: FAT16,•
FAT32 (maximum capacity of USB/
SD card is 16 GB)
MP3 bit rate (data rate): 32-320 Kbps•
and variable bit rate
WMA V4, V7, V8, V9 (L1, L2)•
ISO9660, Joliet•
Maximum title number: 512•
(depending on file name length)
Maximum album number: 255•
Supported sampling frequencies: 2•
kHz, 44.1 kHz, 48 kHz
Supported Bit-rates: 2~256 (kbps),•
variable bit rates
Directory nesting up to a maximum•
of 8 levels
Number of albums/ folders: CD•
maximum 99, USB maximum 199
Number of tracks/titles: maximum 999•
ID3 tag v2.0 to v2.4•
File name in Unicode UTF8•
(maximum length 64 bytes)
10 Product
information
Note
Product information is subject to change•
without prior notice.
Power supply 12 V DC (11 V - 16 V),
negative ground
Fuse 15 A
Suitable speaker
impedance
4 - 8
Maximum power
output
45 W x 4 channels
Continuous power
output
22 W x 4 RMS
(4 10% T.H.D.)
Pre-Amp output
voltage
2.5 V
Aux-in level 500 mV
Dimensions
(W x H x D) 188 x 58 x 140 mm
Weight 0.8 kg
Radio
Frequency range
- FM
- ORIT
87.5 - 108.0 MHz
65 - 74 MHz
Frequency range
- AM (MW)
522 - 1620 KHz (9 kHz)
530 - 1710 kHz (10 kHz)
Usable sensitivity
- FM 8 μV
Usable sensitivity
- AM(MW) 30 μV
English
EN