Philips CED1910BT User manual

Register your product and get support at
www.philips.com/welcome
Always there to help you
Mode d’emploi 45
Manual del usuario 145
Manuale utente 245
User manual 1
Benutzerhandbuch 95
Gebruiksaanwijzing 195
CED1910BT
Question?
Contact
Philips

1
English
EN
Contents
1 Safety 3
2 Your car entertainment system 4
Introduction 4
What's in the box 4
Overview of the main unit 5
Overview of the remote control 6
3 Install the car entertainment system 7
Connect wires 8
Mount into the dashboard 11
4 Get started 12
Prepare the remote control 12
Turn on 12
Use the home menu 13
Set the date and time 14
Adjust the screen brightness 14
Switch display designs 15
5 Play from hard media 15
Load a disc 15
Connect a USB storage device 16
Insert an SD/SDHC card 16
Control play 16
Browse recorded les 18
About DivX® videos 18
6 Listen to radio 19
Switch to radio mode 19
Set up 19
Tune to a radio station 20
Store radio stations in memory 20
Tune to a preset radio station 21
Use RDS related features 21
7 Use the navigation system 22
Insert the map data card 22
Navigate your road trip 22
8 Use Bluetooth devices 23
Activate the Bluetooth function 23
Pair a device 23
Play audio from a connected device 25
Make a call 26
9 Play from an iPod/iPhone 28
Compatible iPod/iPhone models 28
Connect your iPod/iPhone 28
Control play 29
Charge your iPod/iPhone 29
10 Smart Connect Link 30
11 Universal USB Charging 30
12 Adjust sound 31
Adjust the volume level 31
Mute sound 31
Enable the MAX Sound effect 31
Enable the DBB sound effect 31
Enable the FullSound effect 31
Select a preset sound equalizer 31
Others 32
13 Adjust settings 33
Access system setup menus 33
Adjust general settings 34
View system information 34
Adjust Navigation settings 35
Adjust Bluetooth settings 35

2EN
14 Others 36
Play external audio/video input 36
Use rear monitors 36
Use buttons on the steering wheel 37
Reset the system 38
Replace the fuse 38
Upgrade the rmware 38
15 Product information 39
16 Troubleshooting 41
General 41
About the Bluetooth device 42
17 Notice 42
Compliance 42
Care of the environment 42
Trademark notice 43
Copyright 43

3
English
EN
1 Safety
Read and understand all instructions before you
use the device. If damage is caused by failure to
follow instructions, the warranty does not apply.
• Use of controls or adjustments or
performance of procedures other than
herein may result in hazardous radiation
exposure or other unsafe operation.
• The device is designed for negative ground
(earth) 12V DC operation only.
• To reduce the risk of trafc accidents, do
not watch video when driving.
• To ensure safe driving, adjust the volume to
a safe and comfortable level.
• Improper fuses can cause damage or
re. When you need to change the fuse,
consult a professional.
• Use only the supplied mounting hardware
for a safe and secure installation.
• To avoid short circuits, do not expose the
device, remote control or remote control
batteries to rain or water.
• The device shall not be exposed to
dripping or splashing.
• Do not place any sources of danger on
the device (e.g. liquid lled objects, lighted
candles).
• Never insert objects into the ventilation
slots or other openings on the device.
• Never place any objects other than discs
into the disc tray/slot.
• To avoid exposure to laser radiation, do
not disassemble the device.
• Risk of damage to the screen! Never touch,
push, rub or strike the screen with any
object.
• Never use solvents such as benzene,
thinner, cleaners available commercially, or
anti-static sprays intended for discs.
• Clean the device with soft, damp cloth.
Never use substances such as alcohol,
chemicals or household cleaners on the
device.
• Risk of swallowing batteries! A coin
type battery is bundled, which can be
swallowed. Keep the battery out of reach
of children at all times!

4EN
2 Your car
entertainment
system
Congratulations on your purchase, and
welcome to Philips! To fully benet from the
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With the car entertainment system, you can
• listen to music,
• watch videos,
• view pictures,
• listen to FM (RDS included) and AM/MW
radio,
• make phone calls via Bluetooth, and
• navigate your road trip.
What's in the box
Check and identify the contents of the package:
1Main unit 2Remote control
3Rubber cushion 4Screw X 4
(M5x8mm)
5Hexagon head
screw 6Remote control battery
7Use manual 8Trim plate
ab
cd
ef g
h

5
English
EN
Overview of the main unit
a
• Press to eject the disc.
b
• Press to access the navigation system.
• Access the the Smart Phone Mirror
Box (not supplied by Philips) via Smart
Connect Link (refer to Chapter 10).
c
• Press to turn on the unit.
• Press and hold to turn off the unit.
• Press to mute the speakers or release
them from mute status.
d RESET
• Press to reset the system.
e
• Insert an SD/SDHC card.
f MAP
• Insert a microSD card that stores the
digital map data.
g iR sensor
• The sensor that receives infra-red
signals from the remote control.
h AV-IN
• Connect to the audio and video
output sockets of an external player by
a composite AV cable.
i
j
h
a
b
c
e
f
g
d
l
k
i
• Connect to a USB storage device or
iPod/iPhone.
j LCD screen
k +/-
• Press to increase or decrease the
volume.
l MIC
• The built-in microphone for phone
calls.

6EN
Overview of the remote
control
a SOURCE
• Press repeatedly to select a source.
b
• Press to eject the disc.
c
• Return to the previous menu or mode.
d VOLUME + / -
• Press to increase or decrease the
volume.
e
• Access the home menu.
f
• Enable or disable the maximum sound.
g
• Switch to video playback mode.
h
• Enable or disable the FullSound effect.
b
c
a
d
f
h
g
e
j
i
k
l
x
w
y
v
t
u
s
q
o
p
r
n
m
i DVD AUDIO
• Select an audio language or audio
channel.
j DBB
• Enable or disable the DBB (Dynamic
Bass Boost) sound effect.
k EQ
• Select a preset sound equalizer.
l MUSIC ZONE
• Select a music listening zone.
m
• Turn on or off the screen.
n
• Switch to the control interface for
front source or rear source.
o TOP MENU
• Return to top menu.
p DVD MENU
• Access the DVD menu.
q
• Switch to music playback mode.
r
• Switch to picture slideshow mode.
s
• Start, pause, or resume the play.
t OK
• Conrm an option.
u / /TRACK -/TRACK +
• Skip to the previous or next track,
chapter, or le.
• For DVD, press and hold to select a
speed for fast backward or forward
search.
v BAND
• Select a tuner band.
w / /PRESET +/PRESET -
• Tune to the previous or next preset
radio station.
• Skip to the previous or next folder.

7
English
EN
x
• Press to turn on the system.
• Press and hold to turn off the system.
• Press to mute the speakers or release
them from mute status.
y NAVI
• Press to access the navigation system.
3 Install the car
entertainment
system
Always follow the instructions in this chapter in
sequence.
These instructions are for a typical installation.
However, if your car has different requirements,
make the adjustment accordingly. If you have
any question regarding installation kits, consult
your local retailer.
Note
•This system is designed for negative ground (earth) 12V
DC operation only.
•Always install this system in the car dashboard. Other
locations can be dangerous as the rear of the system
heats up during use.
•To avoid short-circuit: before you connect, make sure
that the ignition is off.
•Make sure that you connect the yellow and red power
supply leads after all other leads are connected.
•Make sure that all loose leads are insulated with
electrical tape.
•Make sure that the leads do not get caught under
screws iron parts that will move (e.g. seat rail).
•Make sure that all ground (earth) leads are run to a
common ground (earth) point.
•Use only the supplied mounting hardware for a safe
and secure installation.
•Improper fuses can cause damage or re. When you
need to change the fuse, consult a professional.
•When you connect other devices to this system, make
sure that the rating of the car circuit is higher than the
total fuse value of all the connected devices.
•Never connect speaker wires to the metal body or
chassis of the car.
•Never connect speaker wires with stripes to one
another.

8EN
Connect wires
Note
•Make sure that all loose leads are insulated with
electrical tape.
•Consult a professional to connect wires as instructed
below.
•Before connection, check the car's wiring carefully.
1 Connect the ISO male connectors.
ISO male connectors Connect to
a Green strip, black-
edged green strip Rear left speaker
bWhite strip, black-
edged white strip Front left speaker
c Gray strip, black-
edged gray strip Front right speaker
dPurple strip, black-
edged purple strip Rear right speaker
e Red strip Ignition key +12V
DC when ON/ACC
f Blue strip Motor/electric
antenna relay
control lead
g Blue strip, white strip Amplier relay
control lead
h Black strip Ground
i Yellow strip The +12V car
battery which is
energized at all times
2 Connect other wires if necessary.
Connectors and
sockets on rear panel
External sockets or
connectors
1 For ISO male
connectors As indicated above
2REAR OUT R (Red
socket) Rear right speaker
3AV-IN R(Red socket) Right audio
channel output
socket of an
external player
4AV-IN L(White
socket) Left audio channel output socket of
an external player
5REAR OUT L (White
socket) Rear left speaker
6VIDEO IN (Yellow
socket) Video output socket of an
external player
7VIDEO OUT 1
(Yellow socket) Video input socket of an external
display device
8VIDEO OUT 2
(Yellow socket) Video input socket of an external
display device
9RADIO ANTENNA
(Green socket) Radio antenna
10 CAMERA IN (Purple
socket) Video output socket of an
external camera
11 SUB-W OUT (Blue
socket) Sub-woofer
12 REVERSE CAMERA
(Purple wire) Reverse camera (B+)
13 PARKING BRAKE
(Pink wire) Parking brake (-)

9
English
EN
Connectors and
sockets on rear panel
External sockets or
connectors
14 OE SWC IR
REMOTE IN (Brown
wire)
OE SWC remote
in
15 OE SWC IR
REMOTE IN (Black
wire)
Ground
16 OE SWC AD LEARN
(White wire) OE SWC AD Learn line 1
17 OE SWC AD LEARN
(White wire) OE SWC AD Learn line 2
18 OE SWC AD LEARN
(Black wire) Ground
19 Smart Connect Link
Connector (Black
connector)
Compatible with
external accessory
box (refer to
Chapter 10)
20 External Mic (Black
connector) External microphone
21 GPS AERIAL (Black
connector) GPS smart antenna
22 FRONT OUT R (Red
connector) Front right speaker
23 FRONT OUT L
(White connector) Front left speaker
24 Rear Monitor
Audio Out 1 (white
connector)
Left audio channel
input socket of
one rear monitor
25 Rear Monitor
Audio Out 1 (Red
connector)
Right audio
channel input
socket of one rear
monitor
26 Rear Monitor
Audio Out 2 (White
connector)
Left audio channel
input socket of
another rear
monitor
27 Rear Monitor
Audio Out 2 (Red
connector)
Right audio
channel input
socket of another
rear monitor
Tip
•The pin arrangement for the ISO connectors depends
on the type of your vehicle.To avoid damage to the
system, connect properly.