Philips EM6E User manual

Published by WO 0365 Service PaCE Printed in the Netherlands Subject to modification EN 3122 785 13100
©
Copyright 2003 Philips Consumer Electronics B.V. Eindhoven, The Netherlands.
All rights reserved. No part of this publication may be reproduced, stored in a
retrieval system or transmitted, in any form or by any means, electronic,
mechanical, photocopying, or otherwise without the prior permission of Philips.
Colour Television Chassis
EM6E
AB
For DVD module use Service Manual DVD SD5.31SL (3122 785 13710)
CL 36532008_156.eps
130603
Contents Page Contents Page
1. Technical Specifications and Chassis overview 2
2. Safety & Maintenance Instr., Warn., and Notes 5
3. Directions for Use 7
4. Mechanical Instructions 20
5. Service Modes, Error Codes and Faultfinding 23
6. Block Diagram, Testpoints, and Overviews
Wiring Diagram 41
Block Diagram Supply and Deflection 42
Testpoint Overv. LSP, Auto SCAVEM, and CRT 43
Block Diagram Video 44
Testpoint Overview Small Signal Board 45
Block Diagram Audio 46
Block Diagram Controls 47
I2C IC’s overview 48
Supply Lines Overview 49
Block Diagram Wireless Kit 50
7. Electrical Diagrams and PWB’s Diagram PWB
LSP: Main Supply (Diagram A1) 51 59-64
LSP: Stand-by Supply (Diagram A2) 52 59-64
LSP: Line Deflection (Diagram A3) 53 59-64
LSP: Frame Deflection E/W Drive(Diagr. A4) 54 59-64
LSP: Rotation Circuitry (Diagram A5) 55 59-64
LSP: Audio Amplifier (Diagram A6) 56 59-64
LSP: Small Signal Part (Diagram A8) 57 59-64
LSP: Front (Diagram A9) 58 59-64
SSB: Connector (Diagram B1) 65 86-99
SSB: IF, I/O Video Processing (Diagram B2) 66 86-99
SSB: PICNIC (Feature Box) (Diagram B3A) 67 86-99
SSB: Falconic (Diagram B3B) 69 86-99
SSB: Eagle (Diagram B3C) 70 86-99
SSB: HOP (Diagram B4) 71 86-99
SSB: OTC Flash (Diagram B5A) 72 86-99
SSB: Anti-moiré (Diagram B5B) 73 86-99
SSB: OTC Flash (Diagram B5C) 73 86-99
SSB: Audio Demodulator (Diagram B6A) 74 86-99
SSB: Dolby Digital Decoder (Diagram B6B) 75 86-99
SSB: Dolby Prologic Processor(Diagram B6C) 76 86-99
SSB: DC/DC-Convertor (Diagram B12) 77 86-99
SSB: Tun1/Tun2 (Diagram B13) 78 86-99
SSB: I/O Eur (Diagram B14A) 79 86-99
SSB: I/O Eur (Diagram B14B) 80 86-99
SSB: 2FH I/O (Diagram B14C) 81 86-99
SSB: Audio I/O (Diagram B14D) 82 86-99
SSB: PIP-HIP (Diagram B15A) 83 86-99
SSB: PIP-I/O (Diagram B15B) 84 86-99
SSB: PIP (Muppet) (Diagram B15C) 85 86-99
Mains Switch Panel (Diagram E) 100 101
CRT Panel (Diagram F1) 102 104-105
CRT/ Auto SCAVEM Panel (Diagram F2) 103 104-105
DC Shift Panel (Diagram G) 106 106
VDAF Panel + 2nd Orders (Diagram I) 107 108
Eject Button (Diagram K 109 109
LCD Board (Diagram L 110 111
Side I/O Panel (Diagram O) 112 113
Top Control Panel (Diagram P) 114 114
Wireless Transmitter (Diagram R) 115 116-117
Top Control Panel (Diagram P) 114 114
Radio ECO6 3 Band Cenelec (Diagram RAD) 118 119
Wireless Receiver/Front-end (Diagram S1) 120 122
Wireless Receiver/Back-end (Diagram S2) 121 123
Auto SCAVEM Panel (Diagram SC1) 124 125
Interface Board (Diagram T1-T4) 126-129 130
Audio Output Amplifier (Diagram W) 131 132-133
8. Alignments 135
9. Circuit Description 148
10 Spare Parts List 179
11 Revision List 194

Technical Specifications, Connections, and Chassis Overview
EN 2 EM6E AB1.
1. Technical Specifications, Connections, and Chassis Overview
Index of this chapter:
1. Technical Specifications
2. Connections
3. Chassis Overview
Note: Figures below can deviate slightly from the actual
situation, due to the different set executions.
1.1 Technical Specifications
1.1.1 Vision
Display type :CRT, Real Flat WS
Screen size :28 inch (70 cm)
:32 inch (82 cm)
:36 inch (92 cm)
Tuning system :PLL
Colour systems :PAL: B/G, D/K, I
:SECAM: B/G, D/K, L/
L’
:NTSC: playback only
Channel selections :100 presets
:UVSH
Aerial input :75 ohm, IEC-type
1.1.2 Sound
Sound systems :FM-mono, AM-mono
:FM-stereo: B/G,
Czech
:NICAM: B/G, D/K, I, L
Maximum power :4 x 15 Wrms (int.)
1.1.3 Miscellaneous
Mains voltage :220 - 240 Vac
Mains frequency :50 / 60 Hz
Ambient temperature :+5 to +45 deg. C
Maximum humidity :90 % R.H.
Power consumption :
- Normal operation :≈130 W
- Standby :< 1 W
1.2 Connections
1.2.1 Front, top control and Side I/O Connections
Figure 1-1 Front, top control and Side I/O
Hosiden: SVHS - In
1 - Y Ground 
2 - C Ground 
3 - Y 1 Vpp / 75 ohm 
4 - C 0.3 Vpp / 75 ohm 
Cinch: In
- CVBS 1 Vpp / 75 ohm 
- Audio - L 0.5 Vrms / 10 kohm 
- Audio - R 0.5 Vrms / 10 kohm 
Mini Jack: Headphone - Out
- Headphone 32 - 600 ohm / 10 mW 
1.2.2 Rear Connections
Figure 1-2 Rear View
Audio receiver
Audio - Out (Cinch)
R - Audio - R 0.5 Vrms / 1 kohm 
L - Audio - L 0.5 Vrms / 1 kohm 
Audio - In (Cinch)
C - Audio - Centre 
Sets equipped with Surround output for active speakers
and Digital Audio:
R - Surround - R 0.5 Vrms / 1 kohm 
L - Surround - L 0.5 Vrms / 1 kohm 
- Subwoofer 20 - 250 Hz 
-+
M
P/CHVOLUME
CL 36532008_015.eps
060503
SVHS
VIDEO
AUDIO R
AUDIO L
3.5
-+
FRONT VIEW
SIDE I/O
TOP CONTROL
SK 1
LIGHT SENSOR
RED LED
BLUE LED
IR RECEIVER
AUDIO RECEIVER
AUDIO OUT
SURROUND
OUT
Change the source set-up in the menu
to use the digital audio connectors.
IN 2
WIRELESS
TRANSMITTER
75 Ω
ANTENNA
CINEMA LINK
IN 1
SUBW. 20-250Hz
CENTRE INR
DIGITAL AUDIO
SURROUND SOUND
SURROUND SOUND
TV ANTENNA
75 Ω
FM RADIO
EXT.1 EXT.2
EXT.3 EXT.4
OPTIONAL
SURROUND SOUND
CINCH SOCKET
OR
WIRELESS TR.
SOCKET
TO ACTIVE
SPEAKERS
OPTIONAL
CL 26532008_013.eps
070403
L
R L

Technical Specifications, Connections, and Chassis Overview EN 3EM6E AB 1.
Digital Audio (if present)
- Dig. audio out 
- Dig. audio in 2 
- Dig. audio in 1 
Audio - Out (Cinch)
R - Audio - R 0.5 Vrms / 1 kohm 
L - Audio - L 0.5 Vrms / 1 kohm 
FM Radio (Optional)
- IEC-type Coax, 75 ohm 
External 1: RGB/YUV and CVBS - In/Out
Figure 1-3 SCART connector
1 - Audio - R 0.5 Vrms / 1 kohm 
2 - Audio - R 0.5 Vrms / 10 kohm 
3 - Audio - L 0.5 Vrms / 1 kohm 
4 - Audio Ground 
5 - Audio Ground 
6 - Audio - L 0.5 Vrms / 10 kohm 
7 - Blue / U 0.7 Vpp / 75 ohm 
8 - CVBS-status 0 - 1.3 V: INT
4.5 - 7 V: EXT 16:9
9.5 - 12 V: EXT 4:3 
9 - Video Ground 
10 - N.C.
11 - Green / Y 0.7 Vpp / 75 ohm 
12 - N.C.
13 - Video Ground 
14 - Video Ground 
15 - Red / V 0.7 Vpp / 75 ohm 
16 - Status / FBL 0 - 0.4 V: INT
1 - 3 V: EXT / 75 ohm 
17 - Video Ground 
18 - Video Ground 
19 - CVBS 1 Vpp / 75 ohm 
20 - CVBS 1 Vpp / 75 ohm 
21 - Shielding Ground 
External 2: CVBS and SVHS - In/Out (for VCR)
Figure 1-4 SCART connector
1 - Audio - R 0.5 Vrms / 1 kohm 
2 - Audio - R 0.5 Vrms / 10 kohm 
3 - Audio - L 0.5 Vrms / 1 kohm 
4 - Audio Ground 
5 - Audio Ground 
6 - Audio - L 0.5 Vrms / 10 kohm 
7 - C 0.7 Vpp / 75 ohm 
8 - CVBS-status 0 - 1.3 V: INT
4.5 - 7 V: EXT 16:9
9.5 - 12 V: EXT 4:3 
9 - Video Ground 
10 - Easylink (P50) 
11 - Green 0.7 Vpp / 75 ohm 
12 - N.C.
13 - Video Ground 
14 - Video Ground 
15 - C 0.7 Vpp / 75 ohm 
16 - Status / FBL 0 - 0.4 V: INT
1 - 3 V: EXT / 75 ohm 
17 - Video Ground 
18 - Video Ground 
19 - CVBS 1 Vpp / 75 ohm 
20 - CVBS 1 Vpp / 75 ohm 
21 - Shielding Ground 
External 3: CVBS - In
Figure 1-5 SCART connector
1 - Ground 
2 - Audio - R 0.5 Vrms / 10 kohm 
3 - Ground 
4 - Audio Ground 
5 - Ground 
6 - Audio - L 0.5 Vrms / 10 kohm 
7 - N.C.
8 - CVBS-status 0 - 1.3 V: INT
4.5 - 7 V: EXT 16:9
9.5 - 12 V: EXT 4:3 
9 - Video Ground 
10 - N.C.
11 - N.C.
12 - N.C.
13 - Video Ground 
14 - Video Ground 
15 - N.C.
16 - N.C.
17 - Video Ground 
18 - Video Ground 
19 - N.C.
20 - CVBS 1 Vpp / 75 ohm 
21 - Shielding Ground 
External 4: CVBS - In
Figure 1-6 SCART connector
1 - Ground 
2 - Audio - R 0.5 Vrms / 10 kohm 
3 - Ground 
4 - Audio Ground 
5 - Ground 
6 - Audio - L 0.5 Vrms / 10 kohm 
7 - N.C.
8 - CVBS-status 0 - 1.3 V: INT
4.5 - 7 V: EXT 16:9
9.5 - 12 V: EXT 4:3 
9 - Video Ground 
10 - N.C.
11 - N.C.
12 - N.C.
13 - Video Ground 
14 - Video Ground 
15 - N.C.
121
202
CL96532137_056.eps
171199
121
202
CL96532137_056.eps
171199
121
202
CL96532137_056.eps
171199
121
202
CL96532137_056.eps
171199

Technical Specifications, Connections, and Chassis Overview
EN 4 EM6E AB1.
16 - N.C.
17 - Video Ground 
18 - Video Ground 
19 - N.C.
20 - CVBS 1 Vpp / 75 ohm 
21 - Shielding Ground 
Surround - Sound
Sets equipped with Surround-Out jack plug 3,5 mm
- Surround
Audio 0.2 - 2 Vrms / 10 kohm 
Sets equipped with Wireless Transmitter: RJ45
1 - SDA_TM Signal 
2 - SCL_TM Signal 
3 - GND Ground 
4 - GND Ground 
5 - 11V_S Supply 
6 - AUDIO_SL 2.8 Vrms 
7 - GND AUDIO Ground 
8 - AUDIO_SR 2.8 Vrms 
Aerial - In
- IEC-type Coax, 75 ohm 
1.3 Chassis Overview
Figure 1-7 PWB location
CL 36532008_155.eps
130603
TOP CONTROL PANEL
MAINSWITCH PANEL
LARGE SIGNAL PANEL
SMALL SIGNAL BOARD
SIDE I/O PANEL
CRT PANEL
F
O
B
SCAVEM PANEL
SC
P
E
P
A
DAF PANEL I
RADIO MODULE
RAD
INTERFACE BOARD TDL
T
DC-SHIFT (optional) G
DVD EJECT BUTTON P
K
LCD BOARD TDL L
LCD DISPLAY
DVD MODULE

Directions for Use EN 7EM6E AB 3.
3. Directions for Use
1
Contents
Preparation ...................................................................................... 2
Keys on top of the TV ................................................................... 2
Wireless surround speaker system ............................................ 3
Your remote control .................................................................. 4-5
Contents of the LCD display ........................................................6
To use the menus ............................................................................6
Select the menu language and country ..................................... 7
Store TV channels .......................................................................... 7
Automatic installation ............................................................7
Manual installation................................................................... 8
Give name ................................................................................. 8
Reshuffle the programme list................................................. 8
Select favourite TV channels ................................................. 8
Install TV setup ............................................................................... 9
Speakers .................................................................................... 9
General .............................................................................. 10-11
Source ...................................................................................... 11
Decoder .................................................................................. 11
Demo .............................................................................................. 12
Installation
TV menu
Picture menu .................................................................... 12-13
Sound menu ..................................................................... 13-14
Features menu ....................................................................... 15
Dual screen / PIP / Multipip........................................................ 16
NEX TV IEW /Teletext guide ...................................................... 17-18
Teletext ..................................................................................... 19-20
RDS Radio ................................................................................ 21-22
DVD ....................................................................................... 23-26
Connect peripheral equipment
Connecting and selecting equipment .................................27-29
Audio and Video equipment keys ............................................. 30
Tips .......................................................................................... 31-32
Operation
EasyLink features are based on the “one touch operation” approach.
This means that a sequence of actions are executed at the same
time in both the television and the video cassette recorder, provided
both are fitted with the EasyLink function and connected with the
eurocable supplied with your video recorder.
R End of life directives
Philips is paying a lot of attention to
producing environmentally-friendly in
green focal areas.Your new TV contains
materials which can be recycled and
reused. At the end of its life specialised
companies can dismantle the
discarded TV to concentrate the
reusable materials and to minimise
the amount of materials to be
disposed of.
Please ensure you dispose of your old
TV according to local regulations.
Help?
If this instruction manual does
not give an answer or if ‘Tips’ do
not solve your TV problem, you
can call your Local Philips
Customer or Service Centre. See
the supplied World-wide
guarantee booklet.
Please, have the Model and
Product number which you can
find at the back of your
television set or on the
packaging, ready, before calling
the Philips helpline.
Model: 32PW9788
Product No: AG ....................................
EnglishDeutschFrançaisNederlands
Laser Safety
This unit employs a laser. Due to possible eye injury, only a qualified service person
should remove the cover or attempt to service this device.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION EXPOSURE.
LASER
Type Semiconductor laser GaAlAs
Wave length 650 nm (DVD)
790 nm (VCD/CD)
Output Power 7 mW (DVD)
5 mW (VCD/CD)
Beam divergence DVD: Parallel: 8 degree
Perpendicular: 28 degree
CD: Parallel: 11 degree
Perpendicular: 35 degree
CAUTION
VISIBLE AND INVISIBLE LASER RADIATION WHEN
OPEN AVOID EXPOSURE TO BEAM
ADVARSEL
SYNLIG OG USYNLIG LASERSTRÅLING VED ÅBNING
UNDGÅ UDSÆTTELSE FOR STRÅLING
VARNING
SYNLIG OCH OSYNLIG LASERSTRÅLNING NÄR
DENNA DEL ÄR ÖPPNAD BETRAKTA EJ STRÅLEN
VARO!
AVATTAESSA OLET ALTTIINA NÄKYVÄLLE JA
NÄKYMÄTTÖMÄLLE LASER SÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN
VORSICHT
SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG
WENN ABDECKUNG GEÖFFNET NICHT DEM STRAHL AUSSETSEN
ATTENTION
RAYONNEMENT LASERVISIBLE ET INVISIBLE EN CAS
D’OUVERTURE EXPOSITION DANGEREUSE AU FAISCEAU
CLASS 1
LASER PRODUCT

Directions for Use
EN 8 EM6E AB3.
3
Wireless transmitter module
• Switch the TV off with the power switch.
• Attach the wireless module to the back of the TV as shown.
• Connect the attached cable to the wireless module connector.
• Switch the TV on.
Surround loudspeakers
• There are two NXT SurfaceSound®* surround loudspeakers
which have to be connected to the wireless receiver box 2
Rand L.
If one of the connection cables is too short the 4 m extension
cable supplied can be used.Table stands as well as wall
supports are supplied.
• The Surround sound loudspeakers can be located behind or
to either side of the listener.The front of the loudspeakers do
not have to face the listener.The distance between the TV and
the surround speakers should not exceed 15 m.
Wireless receiver box
Connect the 13V DC adaptor supplied to the 13V DC IN 1
input at the bottom of the receiver box. Connect the adaptor
to the mains.
The slide channel switch 3has been set default to channel 1
in the factory.
The indicator on the receiver box shows that the speakers
are in standby. During sound transmission the indicator turns
to green. 10-15 min. after the sound transmission of the TV
has stopped, the indicator turns back to red to indicate the
low power standby.
The system has already been configured in the factory to
work properly. In rare circumstances, interference from
external RF (wireless) equipments such as RF headphones,
mobile phones or remote controls for lights, may occur.Then
it may be necessary to shift to another wireless channel.
Important:Always be sure that the Wireless receiver box
and the Wireless Surround settings (see p. 9) are switched to
the same transmitting channel.
In rare cases, when no RF surround sound is possible, or
when there is too much interference, use the wired back up
solution. See Wired rear loudspeakers, p. 28.
FM Wire Antenna connection
Connect the supplied FM wire antenna to the FM RADIO
ANTENNA 75
ø connector at the back of the TV.Adjust the
position of the FM antenna for the best reception.
Note: for better FM stereo reception, connect an outdoor FM
antenna or cable antenna to the FM RADIO ANTENNA 75
ø
connector using a 75 ø coaxial wire.
Wireless Surround speaker system
WIRELESS MODULE
®
®
AUDIO in
AUDIO in
(TV)
(TV)
2.
2.
8V RMS
8V RMS
AUDIO in
(TV)
2.8V RMS
13V DC in
VDCin
13V DC in
LR
4 /15W
4 /15W
LR
4 /15W
122
1
2 3
44
32
1
2
33
44
75
75
ANTENNA
ANTENNA
FM RADIO
FM RADIO
75
ANTENNA
FM RADIO
* NXT®is a trademark of New Transducers Limited
2
&Place the TV on a solid surface.
! 32PW9788: 60 kg !
For ventilation, leave at least 5 cm free all
around the TV. Do not place the TV on a
carpet.To prevent any unsafe situations, do not
place any objects on top of the TV.Avoid heat,
direct sunlight and exposure to rain or water.
Keep mobile telephones at a safe distance to
avoid disturbances in picutre and sound.
éInsert the aerial plug firmly into the aerial
socket xat the back of the TV. For best
picture quality use the suppressor-aerial cable
supplied.
“ Remote control : Insert the 2 batteries
supplied (Type R6-1,5V).
The batteries supplied
do not contain the
heavy metals mercury
and cadmium. Please
check on how to
dispose of exhausted
batteries according to
local regulations.
‘Insert the mains plug of the TV in the wall
socket having a mains voltage of 220V-240V.
( Switch the TV on : Press the power switch A
on the front of your TV.
A blue indicator on the front of the TV lights
up, the screen comes on and the LCD display
smoothly and automatically pops up. If the
indicator is red, press the -P+ keys on the
remote control.
§ LCD display :When popped up, the LCD
display will show the mode the TV is in (TV,
DVD or Radio ) together with information
about the selected mode.
When the TV is switched off to standby the
display will go down again.When the TV is
switched off with the power switch the display
will remain in the position it was. If needed, you
can manually push the display down.
Note:
- to switch off the automatic display movement, see
Setup, General menu, Auto LCD movement, p. 10.
- you can change the position of the display, up or
down, with the LCD key on the remote control. See
use of the remote control, p. 4.
More details about the content of the display,
see p. 6.
Preparation
1m
min.
2
Should your remote be lost or broken you can still
change some of the basic settings with the keys on
top of your TV.
Press:
• the V- or + key to adjust the volume;
• the -P+ keys to select the TV channels or
sources.
The MENU key can be used to summon the main
menu without the remote control.
Use:
• the V- and + keys and the P- and P+ keys to
select menu items in the directions as shown;
• the MENU key to confirm your selection.
Note:
When activated via the MENU key on top of the TV,
only
Exit lets you dismiss the menu.
Navigate to
Exit and press the MENU key.
Keys on top of the TV
V
V
MENU
P
P
+
-+
-
MENU/OK
TV
Setup
Demo
Install
Exit
Picture Sound Features

Directions for Use EN 9EM6E AB 3.
5
B
®
®
®
®
hb q
0
i0
879
546
2
Ì
Q
U
®
v
º
S
bæ
MENU
+
-
V¬
+
-
P
13
LCD
DVD
PLAYER DISC
RADIO MENU SET UP
Select
VCR DVD SAT AMP CD
OK
Active Control
Ò‡ π
†
T/C
iOn Screen information
Press to display information about the selected TV channel and
programme.
RDS radio function, see p. 21
Menu/Remote control info
When a menu is on screen, press i to display info on the selected
menu item. For information on the remote control functions, while the
menu info is displayed, press any key on the remote control.
The normal function of the key is not executed.
0Smart surf / nexTView themes
With this key you can easily switch between 2 up to 9 different TV
channels or sources or quickly select TV programmes if
NEX TV IEW with
defined themes is broadcast. See General, Smart surf, p. 10.
Press the
OK key or wait for the time out to dismiss the Smart surf
display.
bDual screen / PIP / Multipip see p. 10 and p. 16.
h Active control see p. 13
qPicture format
Press this key repeatedly or press the cursor up/down to select another
picture format:Auto format, Super zoom, 4:3, Movie Expand 14:9, Movie
Expand 16:9, Subtitle zoom or Wide screen.
Auto format makes the picture fill the screen as much as possible.
In case of subtitles in the bottom black bar,Auto format makes the
subtitles visible. If subtitles are only partly visible, press cursor up.
In case of a broadcaster logo in the corner of the top black bar, the logo
disappears from the screen.
Super zoom removes the black bars on the sides of 4:3 programs with
minimal distortion.
When in Movie Expand 14:9, 16:9, Super zoom or Subtitle zoom picture
format, you can make subtitles visible with the cursor up/down.
0 RDS Radio function, see p. 21
DVD mode function, see p. 23
Super zoomAuto format 4:3 Movie Expand 14:9
Movie Expand 16:9 Subtitle zoom Wide screen
4
B
®
®
®
®
hbq
0
i0
879
546
2
Ì
Q
U
®
v
º
S
bæ
MENU
+
-
V¬
+
-
P
13
LCD
DVD
PLAYER DISC
RADIO MENU SET UP
Select
VCR DVD SAT AMP CD
OK
Active Control
Ò‡ π
†
T/C
Use of the remote control RC 4361
BStandby
Press to switch the TV on or off.
When switched off, a red
indicator on the TV lights up.
®Ò‡π†
Audio- and Video equipment keys
(p. 30)
RDS radio function, see p. 21
DVD see p. 23
ÌCinema Go
See separate Cinema Link
booklet supplied.
®Instant record
See Record with your recorder
with EasyLink, p. 30
æ NEX TV IEW on/off p. 17
Press the
b key to show
NEX TV IEW /Teletext Guide on the
right half of the screen.
SFreeze/Replay/Photo finish
To freeze the picture.
See also p. 10.
ºDVD mode function p. 23
UTime display
The time is displayed on the
screen.
QSurround mode
Press this key repeatedly to
select another available surround
mode.
DVD/RADIO
TV, DVD, Radio mode selection
DISC/MENU
To select DVD menu, see p. 23.
VCR DVD SAT AMP CD
Audio- and Video equipment keys
(p. 30)
vSelect peripherals
(p. 29)
bTeletext on/off p. 19
RDS radio function, see p. 21.
Press the
b key to show
teletext on the right half of the
screen.
OK Press this key
• to activate your choice, when in
the menus.
• to display the programme list.
MENU Main menu on/off p. 6
RDS radio function, see p. 21.
V To adjust the volume.
¬ Interrupt the sound or restore it.
P Programme selection
To browse through the TV
channels and sources stored in
the favourite list.
RDS radio function, see p. 21
0/9 Digit keys
To select a TV channel.
For a two digit programme
number, enter the second digit
before the dash disappears.To
switch immediately to a selected
one digit TV channel, keep the
digit key pressed a bit longer.
xPixel Plus demo on/off
In the right part Pixel Plus and
Digital Natural Motion are
switched on.
PLAYER/SETUP
To select DVD player Setup
menu, p. 23.
LCD LCD tilt up/down
Note: For most keys pressing a key once will activate the function. Pressing a second time will de-activate it.
When a key enables multiple options, a small list will be shown. Press repeatedly to select the next item in the list.
The list will be removed automatically after 4 seconds or press OK to remove immediately.

Directions for Use
EN 10 EM6E AB3.
7
Installation
Install
Language Country Automatic Manual Give name Reshuffle Favourite
install install programmes
The installation menu contains the following items:
EasyLink
If your video recorder has an EasyLink function, during installation, the language, country and available channels are
automatically transmitted to the video recorder.
&Press the MENU key on the remote control.
éUse the cursor down to select Install .
“Use the cursor right to select Language .
Follow the instructions on screen.
‘Use the cursor up/down to select your preferred language
and press the OK key to confirm your selection.
(Use the cursor right to select Country .
§Select the country where you are now located and press
the OK key.
Select
Other when none of the countries applies.
èProceed with the Install menu.
Language
English
Deutsch
Français
Install
Country
Austria
Belgium
Croatia
Install
Select the menu language and country
&Select Automatic install in the Install menu.
Note: All channels must be unlocked in order to autoprogram. If
requested, enter your code to unlock all channels. (See TV,
Features menu, Childlock, p. 15.)
éPress the cursor down.
The autoprogramming option label
Start appears.
“Press the cursor right.
‘The message Searching appears and the progress of
autoprogramming is displayed.
If a cable system or a TV channel which broadcasts ACI
(Automatic Channel Installation) is detected, a programme list
appears.Without ACI broadcast, the channels are numbered
according your language and country selection.You can use
Reshuffle to renumber them. See p. 8.
It is possible that the cable company or the TV channel displays a
broadcast selection menu. Layout and items are defined by the cable
company or the TV channel. Make your choice with the cursor and
press the OK key.
After language and country are set correctly, you can now search for and store the TV channels in two
different ways: using Automatic Installation or Manual Installation (tuning-in channel by channel).
Select your choice with the cursor right.
Automatic install
Install Start
Install
Automatic installation
Store TV channels
6
In TV mode:
- channel number or name or the selected external
- a volume bar
- feed back messages
- the surround signal the TV is processing
In DVD mode:
- the type of disc that is in the slot (DVD,VCD,
CD...)
- the track, title, chapter and time indication
- the surround signal the TV is processing
In Radio mode:
- the name of the selected station, the type of
programme, the frequency
- a volume bar
- the RDS icon when playing a radio station with
RDS signal
- the sound signal (stereo)
- the surround signal the TV is processing
Contents of the LCD display
To use the menus &Press the MENU key on the remote control to summon the
main menu.At any moment you can exit the menu by
pressing the MENU key again.
Note: If you have connected equipment with Cinema Link, more
menu items are present.
éUse the cursor in the up/down direction to select the TV,
Setup , Demo or Install menu.
Use the cursor left/right to select
Picture , Sound or
Features .
Note: Sometimes not all the menu items are visible on the screen
(indicated by a cluster of blue balls). Use the cursor down or right
to reveal all items.
“Use the cursor in the left/right direction to select the menu
item.
‘Use the cursor up/down again to select the control you
want to select or to adjust.
Note: Items temporary not available or not relevant are displayed
in a light grey colour and cannot be selected.
TV
Setup
Demo
Install
Picture Sound Features
B
®
®
®
®
Ì
®
v
º
S
bæ
MENU
+
V¬
+
P
Select
VCR DVD SAT AMP CD
OK
Ò‡ π
†
cursor to select
adjustments
OK key to
activate
return or switch
main menu on/off
ro starts blinking when the TV is receiving a command from the remote control.
Dependent on the selected mode, the following information may be displayed:
Press the i key to get
information about the selected
menu item.

Directions for Use EN 11EM6E AB 3.
9
TV Setup
The Setup menu contains items that control the
settings of the TV’s functions, features, services and
peripherals you may have connected.
The
Speakers menu reflects the speaker-related
controls.
The
General menu allows you to change settings
that will typically be accessed only occasionally.
The
Source menu allows you to select a source.
The
Decoder menu allows you to define one or
more programme numbers as decoder programme
numbers.
Speakers General Source Decoder
Test tone
Balance
Centre volume
Surround L volume
Surround R volume
Wireless surround
To front
To surround
Subwoofer
Auto surround
Setup
Your TV is equipped with integrated front left, right
and centre loudspeakers, capable of reproducing
Stereo and Dolby 3 stereo modes.
For Hall, full Dolby Pro Logic II and Dolby Digital
surround sound you should use the two amplified
rear surround speakers.
Depending on the output and Surround mode (see
Main menu,TV, Sound, Surround mode, p. 13)
selected, some menu items may be greyed out and
are not selectable.
Test tone controls
The menu item
Test tone enables you to
balance the volume levels of the speakers.
&Select Test tone and press the cursor right.
éOnce turned on, the Test Tone will circulate
through the left, centre, right speakers and both
rear surround speakers (if present).
“Press the cursor up/down to select the desired
speaker for individual volume level adjustment.
‘Press the cursor left/right to adjust the volume
level.
Wireless Surround
The system has already been configured in the
factory to work properly.
In rare circumstances, interference from
external RF (wireless) equipment such as RF
headphones, mobile phones or remote controls
for lights, may occur.
Then it may be necessary to shift to another
wireless channel.
Use the cursor left/right, up/down to select
another channel.
Important :Always be sure that the wireless
receiver box and the Wireless Surround setting
are switched to the same transmitting channel.
Otherwise no sound or only a distorted sound
will be heard on the surround speakers.
To avoid interfered picture the wireless transmitter
might be automatically switched off.
In rare cases, when no RF surround sound is
possible or when there is too much
interference, use the wired back up solution
with a 3.5 mm stereo jack. In this case select
Off in the Wireless surround menu item. See
Connect Peripheral equipment,Wired rear
loudspeakers, p. 28.
To front / To surround
Select
To front or To surround and then
select the distance between the TV or the rear
surround speakers and the place you sit to
watch TV.
Subwoofer
Select if you want to use the internal
subwoofer or if you installed an external one.
See Connect Peripheral Equipment, Connect
extra subwoofer, p. 28.
Auto Surround
Sometimes the broadcaster transmits special
signals for Surround Sound encoded
programmes.
The TV automatically switches to the best
surround sound mode when
Auto Surround is
switched
On . However it is possible to
overwrite this setting.
Speakers
8
Manual installation
Searching for and storing TV channels is done channel by
channel.You must go through every step of the Manual
Installation menu.
&Select Manual install in the Install menu.
éPress the cursor down.
Follow the instructions on screen.
Note: Search or direct selection of a TV channel.
If you know the frequency, the C- or S-channel number, enter the
3 or 2 digits of the frequency or the channel number directly with
the digit keys 0 to 9 (e.g. 048). Press the cursor down to proceed.
Repeat to search for another TV channel.
Manual install
Install
Selection mode
System
Programme
Search
Fine tune
Store
It is possible to change the name stored in the
memory or to assign a name to a TV channel for
which a name has not yet been entered.A name
with up to 5 letters or numbers can be given to
the programme numbers 0 to 99.
&Select Give Name in the Install menu and
press the cursor down.
éSelect the programme number.
Note: keep the cursor up/down pressed to scroll
through the programme list quickly.
“Press the cursor right.
A keyboard appears on the screen.
Press the cursor right to enter the keyboard.
Press the cursor up/down, left/right to select
the first character and press OK. Repeat for
every character you want to enter.
Select
Space to enter a space; Delete to erase
the highlighted character in the name entered;
Shift to display upper- or lowercase characters
on the keyboard;
Special to display special
characters on the keyboard. Press OK to
confirm.
‘Press the cursor left repeatedly when you have
finished the name giving.
( Select another programme number and repeat
steps
“ to ‘ .
Give name
Reshuffle the programme list
pπ
® Space ® Delete
ABCDEFG 123
HIJKLMN 456
OPQRSTU 789
VWXYZ 0
® Shift ® Special
You can change the order of the stored TV
channels. &Select
Reshuffle in the Installation menu.
éFollow the instructions on screen.
Select Favourite TV channels
&Select Favourite programmes in the Install
menu.
éSelect your programme number with the
cursor up/down.
“Select Ye s or No with the cursor right.
‘Repeat éand “for every TV channel or
external you want to make a favourite or a
non-favourite TV channel or external.
Give name
Install
VCR1
BBC1
BBC2
CNN
TVE
.....

Directions for Use
EN 12 EM6E AB3.
11
Set/Change code
The Child lock feature (see TV, Features, p. 15)
allows you to lock channels to prevent others
from watching certain programmes.To watch
locked channels, a 4-digit code must be
entered.The Set/Change code menu item
allows you to create or change a Personal
Identification Number (PIN).
&Select Set/Change code .
éIf no code exists yet, the menu item is set to
Set code. If a code has previously been entered,
the menu item is set to
Change code . Follow
the instructions on screen.
Important:You have forgotten your code !
&Select Change code in the General menu and
press OK.
éPress the cursor right and enter the overriding
code 8-8-8-8.
“Press the cursor again and enter a new
personal 4-digit code.The previous code is
erased and the new code is stored.
This menu allows you to indicate the peripheral
you connected to one of the external inputs.
&Press the cursor right to enter the list of types
of peripherals attached to the selected input.
éSelect the peripheral device with the cursor
up/down.
Once you have selected the source type, e.g.
DVD, this source will automatically be selected
when your remote control is in DVD mode,
see p. 4, and when you press the vkey on
the remote control.
Centre input - Centre in volume
When you have connected a surround receiver
to the TV, the loudspeakers of the TV can act as
centre speaker, making a separate centre
speaker unnecessary.
Select
Centre input On or Cinema Link .
Select
On in case you have connected an
external audio receiver without Cinema Link.
Select
Cinema Link in case you have
connected a Cinema Link surround receiver.
When having selected
On you can adjust the
Centre in volume with the cursor left/right to
correct volume level differences of the external
audio receiver and speakers.
Digital audio in 1 or 2
&Select Dig audio in 1 or 2 .
éSelect one of the corresponding connections in
the list when you connected your digital device
together with the additional audio cable you
connected to one of the digital audio in sockets
of your TV. See Connect Peripheral equipment,
Digital equipment, p. 27.
Source
EXT1
EXT2
EXT3
EXT4
SIDE
Centre input
Centre In vol.
Dig. audio in 1
Dig. audio in 2
Setup
If a decoder or a descrambler is connected, see
p. 27, you can define one or more programme
numbers as decoder programme numbers.
&Select Decoder with the cursor right.
éSelect Programme .
“Select the programme number under which
you have stored the programme coming from
your decoder.
‘Select Status .
• Select the input used to connect your decoder:
None ,EXT1 or EXT2.
• Select
None if you do not want the selected
programme number being activated as a
decoder programme number.
Note: Select EXT2 when the decoder is connected
to your EasyLink video recorder.
Decoder
Decoder
Programme
Status
Setup
Source
10
General General
Menu background
Smart surf
Dual screen format
Freeze format
Factory settings
NEX TV IEW
provider
Tilt adjust
OSD
Programme title
Teletext level 2.5
Auto LCD movement
Set/Change code
Setup
This menu allows you to change various settings
that are presumably adjusted less frequently than
most other settings.
Press the i key on the remote control to get
information about the selected menu item.
Smart surf
&Select Smart surf .
éWith the cursor left/right, select
•
2 programmes if you want the 0key to
toggle between the current and the previously
selected channel,
•
9 programmes if you want the 0key to
summon a list of up to 9 channels which can
be selected,
•
Themes if you want the 0key to quickly
select TV programmes if
NEX TV IEW with
defined themes is broadcast.
To add/remove a channel or source:
Tune to the channel or source you wish to add
or remove. Press the 0key and press the
cursor right to add or remove.
Note: If there are already 9 channels/sources in the
list, the one at the bottom of the list will be
removed.
Freeze format
Freeze format allows you to select among
three options:
Freeze , Replay or Photo finish,
to be activated when you press the Skey on
the remote control. See p. 4.
Note: Continuing to hold the Skey down will also
cycle the TV through the various formats. Changing
the format this way does not store the selected
format.
Factory settings
This resets the picture and sound settings to
their predefined factory values, but maintains
the channel installation settings.
Dual screen format
This menu allows you to select the preferred
format which can then be displayed toggling the
bkey on and off.
For Dual screen/PIP/ Multipip and restrictions
when in DVD mode, see p. 16.
&Select Dual screen format with the cursor
down.
éPress the cursor right.
“Select Dual screen ,PIP,PIP 3 or PIP 12 with
the cursor down.
When Dual screen mode is activated with the
remote control bkey, and when
•
Dual screen is selected, the TV splits the
screen into two equally sized screens.
•PIP is selected, the TV shows a full screen of
video with a pip window of video on top if it;
•PIP3 or PIP12 is selected, the TV will display
the main screen together with 3 or 12 pip
screens.
NEX TV IEW provider
Select a TV broadcaster that provides
NEX TV IEW data. How to make use of NEX TV IEW ,
see p. 17.
OSD (On Screen Display)
See Use of the remote control, p. 5, iOn
screen information.
&Select OSD.
éSelect Normal to activate the continuous
display of the programme number.Also TV
channel and programme information are
extended.
Minimum will display reduced
channel information.
Note: When subtitles is switched on, see Features,
p.15, continuous display of the programme number
is not possible.
Teletext level 2.5
Some broadcasters offer the opportunity to
see more colours, other background colours
and nicer pictures in the teletext pages.
&Select Teletext level 2.5 .
éPress the cursor right to select Teletext level
2.5 On
to take advantage of this feature.
“Press the cursor right again to select Teletext
level 2.5 Off
if you like the more neutral
teletext layout.
The selection made is valid for all channels
which broadcast teletext level 2.5.
Note: It may take a few seconds before teletext
broadcast switches over to Teletext level 2.5.

Directions for Use EN 13EM6E AB 3.
13
Active Control
The TV continuously measures and corrects all incoming signals
in order to provide the best picture possible.
&Press the hkey on the remote control.
éThe Active Control menu appears.
“Press the cursor up/down to select the Active Control values
Off , Minimum , Medium (recommended) or Maximum .
The picture settings are being optimised continuously and
automatically which is displayed by bars.The menu items can
not be selected.
‘Press the cursor right to select Smart Picture .
(Press the cursor up/down to select one of the predefined
picture settings.
§Press the cursor right to select Active Display .
èPress the cursor up/down to select Bars , one of the Dual
screen demos or
Off .
When you select Dynamic contrast, Pixel Plus, Digital Noise
Reduction or Digital Natural Motion, the TV screen is divided
into two parts: in the left part the selected picture quality
setting is switched off; in the right part it is switched on.
!Press the h key again to switch off the Active Control menu.
&Press the cursor right to select Sound .
éSelect the menu items in the Sound menu with the cursor
up/down and adjust the settings with the cursor
left/right.Remember, control settings are at normal mid-range
levels when the bar scale is centred.
Smart sound
Select
Smart sound to display a list of predefined sound
settings, each corresponding with specific factory settings of
treble and bass.
Personal refers to the personal preference settings of sound in
the sound menu.
Notes:
- Some menu items are only available in case of a Cinema Link
configuration and when the Cinema Link is activated. Others are
steered by the audio receiver instead of by the TV. See the separate
Cinema Link booklet supplied.
- Dual Xis only available with dual sound transmission.
- Mono/Stereo is only selectable in case of analogue stereo transmission.
- Nicam/Analogue is only selectable in case of Nicam transmission.
Sound
Smart sound
Equalizer
Volume
Headphone volume
Surround mode
(Dual I-II)
(Mono/Stereo)
(Nicam/Analogue)
(Delta volume)
(Night mode)
TV
Sound menu
12
Demo The Demo menu allows to demonstrate the TV
features separately or in a continuous loop.
If
Auto demo has been selected the demo will
automatically present the features sequentially in a
loop. Press one of the cursor keys to stop the
Auto demo.
If one of the features has been selected, this
particular feature demo will run only once, and the
Demo menu will reappear.
Note:The Dealer demo is not part of the automatic
sequence and can only be activated separately.
Auto demo
......
Dealer demo - Digital options
- Light sensor
- Comb filter
TV
Setup
Demo
Install
&Press the cursor right to select
Picture .
éSelect the menu items in the Picture menu with the cursor
up/down.
“Adjust the settings with the cursor left/right or enter the list of
submenu items with the cursor right. Select a submenu item
with the cursor up/down.
Note:To remove the menu background before adjusting the picture
settings, see Select TV setup, General, p. 10.
Smart picture
Select
Smart picture to display a list of predefined picture
settings, each corresponding with specific factory settings.
Personal refers to the personal preference settings of picture in
the picture menu.
Digital options
Pixel Plus is the most ideal setting, doubles the horizontal
resolution and increases the number of lines with 33%.You may
consider to select Movie Plus in case a halo effect should
disturb you. Dependent on your own preference, select Double
lines, or 100 Hz Digital Scan.
Note: When 60 Hz NTSC material is used, the options are changed
to Pixel Plus, Movie Plus or Progressive, progressive scan without
motion compensation.
TV menu
Press the MENU key on the remote control to summon the main menu.
Press the ikey on the remote control to get information about the selected menu item.
Picture Sound Features
Smart picture
Contrast
Brightness
Colour
Sharpness
Tint
Digital options
Dynamic contrast
DNR
Colour enhancement
(Hue)
Picture format
TV
Picture menu

Directions for Use
EN 14 EM6E AB3.
15
Programme list
Press the OK key to switch over to the
selected TV channel or external.
Select subtitles
The subtitle page must be stored for each TV
channel:
Switch on teletext and select the proper
subtitle page from the index. Switch off
teletext.
Subtitle On will automatically display them on
the selected TV channels if subtitles are in the
transmission.A symbol will indicate that the
mode is on.
Select
On during mute when you want to
have the subtitles automatically displayed only
when the sound has been muted with the ¬
key on the remote control.
On timer
&Select On timer with the cursor down.
éSelect On with the cursor right.
“Press the cursor right again to enter the
programme list.
‘Select the TV channel or external you want
your TV to switch to on a selected time and
day.
(Press the cursor right again to select a day of
the week or to select
Daily .
§Press the cursor right once again to enter the
time with the digit keys or with the cursor
up/down and press the OK key to activate.
èPress the MENU key to turn off the menu.
Note:To check your timer settings, press the i
key.
Child lock
&Select Child lock .
éPress the cursor right to enter the Child lock
menu.You’re summoned to enter your code.
Note:You have to re-enter your code each time you
enter the child lock menu.
Important:You have forgotten your code!
See p. 11.
“Select one of the menu items of the child lock
menu:
•
Lock if you want to lock all channels and
externals.
•
Custom lock and press the cursor right.
The items Age lock and Category lock are only
available when
NEX TV IEW broadcast is available.
Select:
-
Age lock if you want to lock programmes
related to a certain age: off, 2, 4 ... 18;
-
Lock after if you want to lock all
programmes from a certain time onwards.
Press the cursor right and enter the time
with the cursor up/down and right. Press the
OK key to validate.
-
Programme lock if you want to lock a
certain TV channel or external;
-
Category lock if you want to lock
programmes related to a certain theme:
Movies, Sports, Shows.... See
NEX TV IEW ,p.17.
• Select
Unlock to disable all locks you have set.
Note:
- The Radio mode can not be locked separately.
- DVD mode - Disc Lock, see p. 26.
Zoom
&Select Zoom with the cursor down and press
the OK key.
éPress the OK key to select one of the zoom
magnifications (x1, x4, x9, x16).
“Additionally you can shift the selected zoom
window over the screen with the cursor keys
up/down, left/right.
‘Press the MENU key to switch off the zoom
function.
Child lock
Lock
Custom lock
Unlock
Age lock
Lock after
Programme lock
Category lock
VCR1
BBC2
CNN
TVE
π.....
Sunday
Monday
.......
Daily 15:45
On timer
Off
On
Off
On
On during mute
Features
Programme list
Subtitle
Sleeptimer
Child lock
On timer
Zoom
TV
Features menu
Press the cursor right to select Features .
Select the menu items with the cursor up/down
and adjust the settings with the cursor left/right.
Press the ikey on the remote control to
get information about the selected menu
item.
14
* Dolby’ ‘Pro Logic’ and the double-D symbol are trademarks of Dolby Laboratories Licensing
Corporation. Manufactured under license from Dolby Laboratories Licensing Corporation.
Surround Modes
Dependent on your personal preference and the
sound signal broadcasted, select one of the
Surround modes.
Stereo
This mode reproduces only the
left and right front sound
signals.
Dolby 3 Stereo
(optimal with Dolby Surround broadcasting)
The Dolby Pro Logic* sounds
are distributed over the front
left, the front right and the
centre TV loudspeakers.
Hall
The sound signal is distributed
over the rear loudspeakers
which creates a hall effect from
the rear.
The centre loudspeaker does
not reproduce any signal.
Dolby Pro Logic II
(optimal with Dolby Surround
broadcasting)
All front and rear loudspeakers
reproduce the Dolby Surround
Pro Logic II sounds.
This sound is always present in
the movie or programme
marked with GDolby
Surround.
Note:
• Normal stereo broadcast is not always encoded to
produce a rear surround sound effect.
• In case of a Cinema Link receiver configuration
connected, only the surround modes of the external
receiver can be selected.
Dolby Digital
When you have connected a
DVD player or a Laser Disc
player (see Connect Peripheral
equipment, Digital equipment, p.
27), you can enjoy Multi
Channel Surround Sound in
your home when playing discs
recorded in Dolby Digital.
In addition to the centre, the left and right internal
speakers, the left and right rear surround
loudspeakers reproduce the Dolby Digital
Surround sounds.
Dolby Digital sound reception info via the
ikey
Press the ikey.
When Dolby Digital sound is reproduced, the
sound info on screen displays the number of
loudspeaker signals which are transmitted.
This is indicated by 2 numbers: the first one
indicates the number of front loudspeaker signals,
the second one the number of rear loudspeaker
signals.
E.g.‘Dolby Digital 3/2’ means that 3 front signals
are transmitted: left, right and centre, and 2 rear
signals: left and right surround.
‘Dolby Digital 1/0’ means that a mono signal is
transmitted.
‘Dolby Digital 2/0’ means that the transmission
contains a stereo signal which can be Dolby
Surround encoded. In this case the surround mode
will display Dolby Pro Logic II.

Directions for Use EN 15EM6E AB 3.
17
NEXTVIEW / Teletext guide
NEX TV IEW is an electronic guide that allows you to look up programmes as you would in a
newspaper or a TV magazine.You can sort the programmes by subject (films, sport...), obtain
detailed information and programme your video recorder if it comes with the
NEX TV IEW Link
function.
Important note: The
NEX TV IEW service is only available on certain programmes and in certain
countries. When no
NEX TV IEW information is broadcast, the teletext programme guide appears in its place. This is
based on teletext programme information (if available) and offers most functions of
NEX TV IEW .
Note:The broadcaster is responsible for the content of the information.
Call NEX TV IEW / Teletext guide
Press the æ key on the remote control to call the NEX TV IEW /Teletext guide.
A menu appears with the message One moment please.After a while you obtain:
•a NEX TV IEW page, if the selected channel broadcasts this service (the NEX TV IEW logo is displayed),
• a teletext page, if the selected channel does not broadcast
NEX TV IEW ,
•
No information available is displayed if neither NEX TV IEW nor teletext are transmitted. In this case,
select another channel.
Select TV channels by theme
If
NEX TV IEW with defined theme is broadcast, it is possible to quickly select TV programmes with the
0key. See Setup, General menu, Smart surf, p. 10.
Display of a
NEX TV IEW page
The information is set by the channel that transmits the
NEX TV IEW service. See also Setup menu,
General,
NEX TV IEW provider, p. 10.
This logo is only displayed
during a
NEX TV IEW
transmission or when one
of the externals is selected.
No logo indicates a teletext
programme guide
Programme name and
broadcast time
Review Record Remind Watch Lock
Mon 03
Mon 03
Tue 04
Wed 05
Thu 06
Fri 07
Sat 08
puck
function keys
NEX TV IEW guides
BBC1 18.00 BBC News
BBC2 18.00 The Simpsons
CNN 18.00 World News
FR2 18.00 On a tout essayé!
CH5 18.15 Tomorrow Never Dies
Menu 18.00 Channel Theme
Mon 05 Feb 18.00
Picture/ NEX TV IEW - Teletext Guide
&Press the ækey. Press the bkey to show NEX TV IEW -Teletext Guide on the right of the screen.
éUse the cursor keys to select a TV channel.
“Press the bkey to switch off dual screen.
NEX TV IEW guides
&Use the cursor key left/right to select Time , Channel , Theme , the Date guide.
The
Time guide provides an overview of all programme titles active in the selected time block.The
Channel guide provides an overview of all programmes that are broadcast by a single channel during
one day. With the
Date guide you can choose a specific date.The Theme guide displays a list of all
programmes at the selected date, that matches with the selected category.
Going through the menu guide, the TV is collecting the sorting criteria to finally display a list of
programme events.
éPress the OK key to select the guide type.
“Move the puck down and to the right to select the programmes.
If available a summary or commentary on the programme is displayed at the bottom of the screen.
‘Use the cursor up/down to scroll through the programmes.
16
Dual screen / PIP / Multipip
Press the bkey to switch on Dual screen ,PIP or one of the PIP
modes.
Press the bkey again.The screen that has a yellow border will
become the full main screen picture.
Notes:
- Continuing to hold the bkey down will cycle the TV through the various
formats launching a new format after each second the key is held down.
After standby of the TV, the preference as set in the Setup, General menu is
used.
- When Dual screen mode is selected, two picture formats are supported: Full
screen or 4:3 letterbox picture format (vertical squeeze).
- Audio from the right screen or the PIP plays to the headphones.
- Dual screen/PIP/Multipip is not possible in Radio and DVD mode.
Display options
• Press the cursor right to highlight the right screen.
• Press the cursor down to highlight the single PIP screen.
• Press the cursor right to enter the Multipip screen and then use
the cursor keys to navigate through the PIP screens and to
hightlight a PIP screen.
Changing TV channels or external sources in left, right, PIP or
Multipip screen
• Press the -P+ keys or the 0key or the digit keys in order to
change the TV channels or external sources in the highlighted
screen.
Scan PIP3 or PIP 12
Navigate to the lowest PIP and press the cursor down to display a
following series of PIP screens.
Define the position and the size of the single PIP screen
&Select a Dual screen mode with a single PIP screen.
éPress the cursor down to highlight the PIP screen.A PIP menu
appears with which you can define the position and the size of the
PIP screen.
Note: When the PIP menu times out, press the OK key to make it
reappear.
“Press the cursor down again to select Position or Size.
‘Press the OK key or the cursor right to activate.
(Use the cursor keys to define the position of the PIP screen.
Use the cursor left/right to define the size of the PIP screen.
§Press the OK key.The PIP menu reappears.
èPress the cursor up to the top of the menu to highlight the main
screen again.
!Press the OK key to switch off the menu or wait until it is timed
out.
On-Screen information
The highlighted On-Screen information,which appears when
changing channels, always refers to the active screen.
o
œ
Position
Size
Dual screen PIP
AUX
AUX
PIP 3 PIP 12
PIP1 PIP1 PIP2 PIP3
PIP5 PIP6 PIP7
PIP9 PIP10 PIP11 PIP12
PIP8
PIP4
PIP2
PIP3
B
®
®
®
®
hb
b
q
0
i0
879
546
2
Ì
Q
U
®
v
º
S
bæ
MENU
+
-
V¬
+
-
P
13
LCD
DVD
PLAYER DISC
RADIO MENU SET UP
Select
VCR DVD SAT AMP CD
OK
Active Control
Ò‡ π
†
T/C

Directions for Use
EN 16 EM6E AB3.
19
Switch Teletext on and off
Press bto switch the teletext on.
Select a Teletext page
- Enter the desired page number with the digit
keys, the cursor keys up/down, left/right or
with the -P+ key.
- Select the options at the bottom of the screen
with the colour keys.
Previously selected teletext page
(Only possible in case there is no list of favourite
teletext pages available. See p. 20.)
Press the 0key.
Select the index teletext page
Press the grey colour key †to display the
main index (usually p.100).
Only for T.O.P teletext broadcasts :
Press i. A T.O.P. overview of the teletext
subjects available is displayed.
Select with the cursor up/down, left/right the
desired subject and press the OK key.
Not all TV channels broadcast T.O.P. teletext.
Select subpages
When a selected teletext page consists of
different subpages, a list of available subpages
appears on the screen.
Press the cursor left or right to select the next
or previous subpage.
Enlarge a Teletext page
Press qrepeatedly to display the upper
teletext part, the lower teletext part and then
to return to the normal teletext page size.
When the teletext page is enlarged, you can
scroll the text, line by line using the cursor
up/down.
Picture/Teletext-Active screen selection
When in dual screen picture/teletext (bkey),
enter the desired page number with the -P+
key, then press the MENU key, then select the
left screen (with the blue ball at the top).
You can now select a compressed or full screen
view of picture/teletext with the qkey.
Hypertext
With hypertext you can quickly jump to a
pagenumber or search for a specific word
shown on the current teletext page.
&Press the OK key to highlight the first word or
a number on the page.
éUse the cursor up/down, left/right to select any
other word or number you want to search for.
“Press the OK key to confirm.The search starts.
A message appears at the bottom of the screen
to indicate the searching, or that the word or
page is not found.
‘Use the cursor up to exit hypertext.
Most TV channels broadcast information via teletext.This TV has a 1200 pages memory that will store
most broadcasted pages and subpages to reduce waiting time. After each programme change, the
memory is refreshed.
Teletext
LIONS RECORD ANOTHER WIN 430
Index 100 News 300
BBC Info 110 Headlines 305
Children 120 Weather 400
Cookery 150 Sports 415
Education 200 Radio 500
Lottery 230 Travel 550
Finance 240 Subtitling 888
Music 280 TV Listings 600
Red Green Yellow Blue
102 «03 04 05 06 07 08 09 10 11 12»
BBC CEEFAX 102 Mon 05 Feb 16.35.22
BBC CEEFAX
18
Teletext Guide
&Enter with the digit keys, the teletext page number that contains the programme information for the
current channel.
éPress the cursor right to move the puck over the selection ball.
“Use the cursor up/down to scroll through the different programmes.
• If the selected programme contains a page number with an optional subcode referring to a page with
more info about the programme, press the OK key to display the information. Press the OK key again
to return to the programme guide page.
• If the selected programme guide page satisfies theVPT requirements,
- it will be possible to record, remind, watch or lock programmes:
- the TV will remember the last selected teletext page number of that channel that contains programme
guide information and indicates which programme starts at what time. Every time you press the æ
key, the teletext programme guide page of the selected TV channel will be available.
• When necessary you can select the subpage number by moving the cursor to the pageball and
pressing right.
Note:You must enter the teletext pagenumber for each channel.You can change the channels also by moving
the cursor up/down in the list in the left of the page.
Basic functions
Press one of the grey †,red®, green Ò, yellow ‡or blue πkeys to activate a NEX TV IEW or
Teletext Guide function.The keys appear in grey if the function is not available.
Review : this menu provides a list of programmes that are marked as reminders, those that have to be
recorded and those that are locked.This menu can be used to change or remove marked
programmes.
Record : to programme the recording of the video recorder (if it has a NEX TV IEW Link function and is
connected to EXT. 2).
Remind : automatically switch on the TV if it is in standby or by displaying a message if the TV is on.
Lock : to lock certain programmes to prevent recording or watching.
For the functions Record, Remind or Lock, a small menu pops up in which you can choose the
interval: once, daily or weekly, or clear an earlier made record, remind or lock setting.The default
interval is set to
Once .To confirm the frequency, press the OK key.
Watch : to watch the selected and currently broadcast programme.
Acquisition and updating of NEX TV IEW information
Acquisition and updating of NEX TV IEW is done when you are watching the TV channel of the selected
NEX TV IEW provider, see Setup menu, p. 10, or when the TV is switched to standby.
Acquisition of fresh data will happen once during the night.
Note: it may be necessary to put the TV in standby mode when all
NEX TV IEW information is outdated, e.g. when
returning from holiday.
Review Record Remind Watch Lock
BBC1
BBC2
ITV
CH4
CH5
page ball
selection ball
channel list
Mon 05 Feb 16.35
100 1
BBC CEEFAX
LIONS RECORD ANOTHER WIN 430
Index 100 News 300
BBC Info 110 Headlines 305
Children 120 Weather 400
Cookery 150 Sports 415
Education 200 Radio 500
subpages
scroll ball

Directions for Use EN 17EM6E AB 3.
21
B
®
®
®
®
hb q
0
i0
879
546
2
Ì
Q
U
®
v
º
S
bæ
MENU
+
-
V¬
+
-
P
13
LCD
DVD
PLAYER DISC
RADIO MENU SET UP
Select
VCR DVD SAT AMP CD
OK
Active Control
Ò‡ π
†
T/C
RDS radio function keys
When in RDS radio mode
Ò †
Press to tune the radio to a
station with sufficient reception.
‡ Press to stop programming radio
stations.
b Press if you want to label radio
stations without RDS reception
or if you want to alter a
detected RDS name. Use the
cursor up/down, left/right keys
and press
OK to confirm.
i Press repeatedly to select the
display information mode:
programme
NAME , the timed
FREQUENCY , the programme
TYPE or TEXT for messages
broadcast by the radio station.
U Clock on/off
Q Press to select another available
surround mode.
DVD Press repeatedly to select
Radio,TV or DVD mode.
®Programming radio stations
(p. 22)
MENU
Press to select the sound menu.
P Radio station selection
Press P+/- to select the
programmed radio stations.
0 Press to select the previous
selected radio station.
LCD
LCD tilt on/off
Switch to the RDS Radio mode
Press the DVD/RADIO key on the remote
control repeatedly until the RDS Radio mode is
selected.The screen is blanked and, if the
received radio station transmits RDS data*, the
RDS indicator on the display lights together
with the available information about the radio
station tuned.
* RDS, Radio Data Systems, is a service that allows
FM stations to show additional information. If you
are receiving a RDS station, the RDS icon and the
station name are displayed.
Tuning to radio stations
To find a new frequency hold down the Òor
†key on the remote control until the
frequency starts to change.The radio
automatically tunes to a station with sufficient
reception.
If a FM station is received in stereo, stereo is
displayed.To tune to a weak station, briefly and
repeatedly press the Òor †key until you
have found optimal reception.
Note: Remote control info is not available.
20
Teletext menu
(only available in full screen teletext mode)
&Press the MENU key to activate the menu.
éPress the cursor up/down to select the menu
items.
“Press the cursor right to activate.
Reveal
Reveals/conceals hidden information on a page,
such as solutions to riddles and puzzles.
Press the cursor right to activate.
Favourite
This list contains up to eight favourite teletext
pages. Only the pages of the current channel
can be selected.
&Press the cursor right to enter the list.
éPress the cursor right again to add the current
page or to select one of the favourite pages to
the list.
“Press the MENU key to watch the page.
‘Use the 0key to browse through the list of
favourite pages.
Search
Selecting a word
On the keyboard on screen you can type in a
random word you want to search for in the
teletext pages.Whether upper- or lowercase is
used has no influence.
&Press the cursor right to enter the keyboard.
éPress the cursor left/right, up/down to select
the characters, words or functions.
“Press the OK key to confirm each character
selected.
‘Select Cancel to cancel the word; Space to
enter a space;
Delete to delete the last
character selected;
Shift to switch between
lowercase or capital characters;
Special to
display special characters on the keyboard and
press the OK key.
(Press the cursor left repeatedly to return to
the Teletext menu again.
Searching a word
&Type in the word on screen or select a word
from the history list on the right and press OK.
éSelect Accept and press OK again.The message
Searching appears.
“To cancel the searching or to search for a new
word, select
Keyboard and press OK.
‘When a word is not found, a message appears.
When the word is found, it is highlighted in the
teletext page.To continue the search, press the
OK key.
Cycle subpages (if available)
Makes the subpages cycle automatically.
Press the cursor right to activate and to de-
activate again.
Timed page
To display a specific page from a selected TV
channel at a certain time.
&Press the cursor right and select Ye s or No .
éEnter the time and pagenumber with the cursor
keys or the digit keys.
Note:Teletext does not have to remain switched on,
but you should watch the TV channel you have
selected the specific page from.
“Press the cursor left to return to the TV menu
again.
Language
If the displayed characters on screen do not
correspond with the characters used by the
teletext broadcaster, you can change the
language group here.
Select
Group 1 or Group 2 with the cursor
right.
Press the MENU key to leave the Teletext menu.
102 03 04 05 06 07 08 09 10 11 12
TELETEXT
BBC1
Red Green Yellow Blue
puck
Cancel Accept
Space Delete
ABCDEFG 123
HIJKLMN 456
OPQRSTU 789
V W X Y Z 0
Shift Special
WORD
NAME
FOOTBALL

Directions for Use
EN 18 EM6E AB3.
23
B
®
®
®
®
hb q
0
i0
879
546
2
Ì
Q
U
®
v
º
S
bæ
MENU
+
-
V¬
+
-
P
13
LCD
DVD
PLAYER DISC
RADIO MENU SET UP
Select
VCR DVD SAT AMP CD
OK
Active Control
Ò‡ π
†
T/C
DVD/Audio CD function keys
When in DVD mode
Cursor keys
• Press cursor up to freeze the
picture. Press again to move to the
next frame.
• Press cursor down repeatedly to
slow play down to 1/2, 1/4 or 1/8
speed.
• Press cursor left/right repeatedly
to fast rewind/forward at x4 or
x32 speed.
º/SFreeze - Frame
Press º or the cursor up to
freeze the picture. Press again to
move to the next frame.
Pause playback in case of an
audio CD.
i Press to display information
about the current disc.
DVD
Press repeatedly to switch to
dvd mode.
DISC
Press to summon the menu of
the DVD disc.
Its contents are entirely
dependent on the DVD disc. It
allows access to different
sections such as choice of
language, direct access to scenes,
bonus materials, etc. Use the
cursor keys to navigate through
the menu and press the
OK key
to confirm.
In case of a picture CD, 4
pictures are displayed at once.
Press the
-P+ keys to display a
previous/next series of pictures.
Select a picture with the cursor
keys and press the
OK key to
display a picture full screen.
PLAYER/SETUP
DVD setup menu, p. 25
LCD
Automatic LCD tilt on/off.
πPlay
Once a disc is loaded, playback
starts automatically. Certain discs
may ask you to make a selection
from a menu.
Press
π to resume play after
freezing the picture, stopping
playback, switching to standby or
ejecting the disc.
Press
π to start playback of an
audio CD or picture CD. Press
again to start a slide show in
case of a picture CD.
Note: When temporarily switching
to TV mode, and switching back to
DVD mode within 10 minutes, the
DVD will automatically resume.
‡Stop playback
The default screen appears and
gives information on the player
status.
Ò † Fast forward and
rewind
Press (or the cursor left/right) to
fast forward or rewind at x4 or
x32 speed or x8 speed in case of
an audio CD. Press
π to return
to normal speed.
P Press to go to the previous or
next chapter in case of a DVD,
the previous or next track in
case of an audio CD, the previous
or next picture in case of a
picture CD.
T/C Title/Chapter
DVD discs are divided into
different chapters to allow
certain scenes to be accessed
directly. Press the
T/C key to
access the Title or Chapter menu
directly.
Note: Remote control info is not available
To reduce energy consumption, it may take some time for the DVD player to become active.
22
Programming radio stations
You can store up to a total of 50 radio stations.
Automatic programming
Press the ®key on the remote control for
about 3 seconds. SEARCH is displayed and all
the available stations are programmed
(overriding all former programmed radio
stations).The system will store first the RDS
stations with a strong enough signal, then the
RDS stations with a weaker signal and finally
the non RDS stations.
Note:
- to stop the automatic installation, press the ‡key.
All stations before the stop, are stored into the
memory.
Manual programming
&Briefly press the ®key on the remote control.
The current station number starts flashing and
the station name, in case of a RDS station, or
the tuned frequency is displayed.
éHold down the Òor †key to start the
search for a new radio station.The search will
stop on the next radio station and display the
tuned frequency which will eventually be
replaced by the detected RDS name.
Note: briefly and repeatedly press the Òor †
key to fine tune the frequency if necessary.
“Use the P- or +key or the digit keys to select
the station number where you want to store
the new radio station.
‘Press the ®key to store the new radio
station on the selected station number.
(Repeat &to ‘to store another radio
station.
Note:To stop the manually installation, press the ‡
key. Nothing is stored and everything is restored to
the radio status just before entering the manual
installation mode.
Give name
&Select the station number of the radio station
you want to assign a name (for stations without
RDS reception) or to change the name.
éPress and hold the bkey on the remote
control for about 3 seconds.The cursor flashes
on the first of 8 characters.
“Press the cursor up/down to change the
character.
‘Press the OK key to confirm the new name.
Note:To erase a station name:
- Select the station number you want to erase the
name of.
- Press and hold the bkey for about 3 seconds.
- Press and hold the ‡key for about 3 seconds.
- The message DELETED appears and the RDS
name or the frequency is displayed.

Directions for Use EN 19EM6E AB 3.
25
The DVD Player Menu
This menu allows you to access all the special functions of the DVD player.
&Press the PLAYER SETUP key on the remote control.
éUse the cursor left/right up/down to go through the options in the menu and confirm your selection
with the OK key.
“Press the PLAYER SETUP key again to switch off the menu.
Disc option
•
Disc Navigation : to access the different
chapters, tracks or pictures available on the disc.
•
Subtitle and Audio : to choose the subtitling
language and audio language.
The ækey on the remote control allows you
to change the subtitling language directly.
Slide show (Available only with a picture CD (only
JPEG-pictures supported).
In this menu you can select the following slide
show options:
•
Picture time : to set the duration that the
picture will be shown on screen;
•
Transition time : to set the duration that the
transition effect will be shown on screen.
•
Transition effect : to select the transition effect
between the pictures.
View
•
Angle : some DVDs include sequences recorded
from several camera angles. Generally a special
icon will appear. Use the cursor up/down to
select the angle.
•
Scan : scanning plays the first 10 seconds of each
track on the disc.To continue playback at your
chosen track, press π.
•
Rotate (only with a picture CD): the picture can
be rotated either clockwise or counterclockwise
by 90 or 180 degrees.
Search
•
Time search : use the digit keys to enter a
precise time to go to. Press OK or the πkey to
resume at the indicated time.
•
Fast motion and Slow motion : use the cursor
left/right to select the desired speed.To resume
normal speed, press π.
•
Frame by frame : the image freezes. Use the
cursor left/right to move backwards or forwards
frame by frame. Press πto resume normal play.
Program
See ‘Programming favourite tracks’ on p. 26.
Disc option Slide show View
Toolbar Search Program
Picture
•
Video shift : to move the image horizontally.
Sound
•
Night mode : optimises the sound dynamics for
low volume listening
Features
•
Help-line : when set to on, a navigation help-line
appears.
Preferences Picture Sound Features
Language
•Default audio: to define the preferred language
for the soundtracks of DVD films.
•Default subtitle: to define the preferred language
for subtitles on DVD films.
Note: If the preferred language is available on the
disc, it will be selected by default. If not, the first
language on the disc will be activated.
Features
•PBC (Playback Control): to activate or
deactivate the possibility to directly select a title
on certain Video- or Super Video-CDs.
Access control
•Disc lock: see p. 26.
Setup Language Features Access control
Toolbar
Preferences
Setup
Note: Dependent on the kind of disc played, the availability of menu options may differ.
24
Loading / removing a disc
Loading a disc
Insert your disc in the slot with the label side
facing up.The player will pull the disc in
automatically.
Note: it may take a few seconds before the disc is
read. Please wait until the reading is finished.
Warning: Do not insert 8 cm (3 inch) discs or a
malfunction may occur.
Removing a disc
Press the button located on the front of
the TV.
The player ejects the disc.
Remove the disc.
Introduction to DVD Video
The Universal DVDVideo Standard offers some
unique features, such as selection of different
sound tracks for different languages, different
subtitle languages and even multiple camera angles
(disc dependent).
Depending on the material on the disc (a movie,
video clips, drama series, etc.) the disc may have
one or more titles which can consist of multiple
chapters (also called scenes).
C 1
T 1 T 2
DVD
C 2 C 1 C 2 C 3
Supported disc formats
MP3 disc properties
Your built-in DVD player supports the following
MP3-CD format (ISO9660)
• Max. 30 character filenames
• Max. levels of nested directories: 8
• Max.ALB number: 32
• VBR bit-rate support
• Supported MP3 sampling frequencies:
32 kHz, 44.1 kHz, 48 kHz
• Supported MP3 bit-rates:
32, 64, 96, 128, 192, 256 kbps
• Following formats are not supported:
.WMA, .AAC, .DLF, .M3U, .PLS
Additional notes:
• Chinese filenames are not supported.
• The CD-session must be closed.
• Only the first session of a multi-session CD is
supported.
• CDs in UDF format are not supported.
• In compliance with the SDMI, digital audio out is
muted while playing MP3-CDs.
• The disc reading time may exceed 10 seconds
due to a large number of songs on the disc.
The built-in DVD player allows you to play DVDVideo discs (including DVD+R and DVD+RW) as well as
Video-, Super Video-, Audio-, MP3- and JPEG picture CDs (including CD-R and CD-RW CDs).The discs
can be recognised by their logo on the packaging.
Note: DVD discs and players are designed with regional restrictions. Before playing a disc, make sure the disc is the
same zone as your player.The region code of this DVD player is 2.

Directions for Use
EN 20 EM6E AB3.
27
There is a wide range of audio and video equipment that can be connected to your TV.
The following connection diagrams show you how to connect them.
Note: EXT. 1 can handle CVBS and RGB, EXT. 2 CVBS, RGB and Y/C, EXT. 3 and EXT. 4 CVBS.
It is preferred to connect peripherals with RGB output to EXT. 1 or EXT. 2 as RGB provides a better picture quality.
If your recorder is provided with the EasyLink function, it should be connected to EXT. 2 to benefit from the
EasyLink functionality.
Recorder (VCR+DVD+RW)
Connect the aerial cables 1,2and, to obtain the optimum
picture quality, eurocable 3as shown.
If your recorder does not have a euroconnector, the only possible
connection is via the aerial cable.You will therefore need to tune in
your recorder’s test signal and assign it programme number 0 or
store the test signal under a programme number between 90 and
99, see Manual installation, p. 8.
See the handbook of your recorder.
Decoder and Recorder
Connect a eurocable 4to your decoder and to the special
euroconnector of your recorder. See also the recorder handbook.
See Decoder, p. 11. You can also connect your decoder directly to
EXT. 1 or 2with a eurocable.
Other equipment (except digital sources)
&Connect the aerial cables 1,2and 3as shown (only if
your peripheral has TV aerial in-/output).
Better picture quality can be obtained if you also connect
eurocable 5to EXT. 2 and a eurocable 4to EXT. 1,3or 4.
éLook for the test signal of your peripheral in the same way as
you do for a recorder.
When a recorder is connected to EXT. 1 you can only record a
programme from your TV. Only when a recorder is connected to
EXT. 2 it is possible to record a programme from your TV as well as
from other connected equipment.
Digital equipment (DVD, Digital Set Top Box, ...)
&Connect your digital equipment with a eurocable 1to one of
the euroconnectors (EXT 1,2, 3 or 4), or with a cinch cable to
the video input at the right side of the TV.
éTo enjoy Multichannel surround sound from digital sources with
a Dolby Digital audio output also connect an audio cable 2to
one of the two digital audio in sockets of your TV. Make a
selection in the Setup, Source menu, p. 11.
“According to the connected digital equipment, select DVD,SAT,
Game or Digital STB in the Setup/Source menu. See p. 11.
2
EXT.EXT.
2
EXT.
CABLE
1
4
2
3
1/2
EXT.EXT.
1/2
EXT.
CABLE
1
235
4
1/2/3/4
EXTERNAL
1
2
DIGITAL
AUDIO IN
Connect Peripheral Equipment
26
Play authorisation
When the Disc Lock function is switched on in the
Setup,Access Control menu, you will be asked to
enter your code to authorise the playing of the
DVD or Video-CD.
&Insert a disc.
éEnter your secret code.
“Select Play once or Play always .
•
Play once : the disc can be played as long as it
is in the player and the television remains on
and in DVD mode.
•
Play always : the disc will become child safe
(authorised) and can always be played, even if
the Child lock is set to on.
Note: When a disc has been labelled Play always
you will not be asked to enter your code any longer.
The player can memorise a list of 120 child safe
discs. When the list is full and a new disc is
added, the last disc in the list is removed.
Double sided DVDs and Video-CDs with
multiple volumes may include a different
identification for each side or volume. In this
case you will have to authorise each side or
volume separately.
Removing play authorisation
&Insert a disc. Playback starts automatically.
éWhen the usymbol appears on screen, press
the ‡ key.The vsymbol appears and the disc
is now deauthorised.
Forgotten your secret code ?
See TV Setup, General, p. 11.
Programming favourite tracks
&Press the PLAYER SETUP key on the remote
control.
éIn the Toolbar, Program menu select Tracks
using the cursor left/right up/down.
“Move the cursor right to open the list of
tracks, titles or rolls.
Move the cursor up/down to select a track, a
title or a roll.
Press the cursor right to open an overview of
chapters or pictures.
Move the cursor up/down to select a chapter
or picture.
‘Press the OK key to confirm.
(Repeat steps “and ‘for each favourite
track, chapter or picture you wish to program.
If you wish you can repeat the same track,
chapter or picture several times.You have a
maximum of 20 favourites per disc.
§Press the PLAYER SETUP key to exit the
menu.The favourite tracks will begin playing
automatically.
This function allows you to programme a selection of your favourite audio tracks from an Audio CD or
your favourite chapters from a DVD into the memory.
When the Program function is active only the programmed audio tracks or DVD chapters will be played.
Program
Program
Tracks
Playlist
Clear all
Toolbar
Track/Title/Roll
11
12
1
2
3
4
Access Control / Disc Lock
This function allows you to lock/unlock the DVD
player.
&Press the PLAYER SETUP key.
éIn the Setup menu, select Access Control .
“Press the cursor down and enter your secret
code.
‘Press the cursor down to select Disc Lock and
switch the Lock
On or Off with the cursor
right.
(Press the PLAYER SETUP key to exit the
menu.

Directions for Use EN 21EM6E AB 3.
29
Connect audio receiver
Although your TV is already equipped with a Digital MultiChannel decoder you might want to connect
your own MultiChannel surround receiver.
MultiChannel surround receiver with or without digital input connectors
&Connect a MultiChannel surround receiver to the AUDIO OUT
Rand Lconnectors at the back of your TV.
éIf you want the loudspeakers of your TV to act as centre
speaker, also connect an audiocable to the MultiChannel
surround receiver CENTRE OUT connector and to the
CENTRE IN connector at the back of your TV.
“Select Centre input On in the Source menu; See p. 11.The
loudspeakers of the TV will now only produce centre sound.
‘If necessary, adjust the volume level of the centre sound in the
Centre in volume menu item of the Source menu.The overall
volume has to be controlled via the MultiChannel surround
receiver.
(In case of a Digital MultiChannel surround receiver, also connect
the receiver to the DIGITAL AUDIO OUT connector.
In this case the loudspeakers of your TV can not act as centre
speaker. Select
Centre input Off in the Source menu, see p. 11. Also
see the instructions manual of your Digital MultiChannel surround
receiver.
See the separate supplied Cinema Link instruction manual
Attention: the sound info on screen will not correspond with the actual sound reproduction.
Press the vkey on the remote control repeatedly to select EXT1,EXT2,EXT3,EXT4 or SIDE
according to where you connected your equipment at the back or the right side of your TV.
Remark : Most equipment (decoder, recorder) carries out the switching itself, when it is switched on.
To select connected equipment
Cinema Link Surround receiver
Recorder or DVD with EasyLink
The recorder (VCR or DVD+ RW) or DVD can be
operated with the remote control via the Recorder
or DVD menu on screen.
&Press the MENU key on the remote control.
éSelect the Recorder or DVD menu with the
cursor up/down.
“Press the cursor left/right, up/down to select
one of the recorder or DVD functions.
The key ®for recording can be operated in the TV
mode.
If your EasyLink recorder has the system standby
function, when you press the Bkey for 3 seconds,
both TV and the recorder are switched to standby.
Ò p ‡ π † ® Ï
Rwd Play Stop Play Ffw Rec Eject
Recorder
Ò p ‡ π † Ï
Prev. Play Stop Play Next Eject
DVD
CENTRE INCENTRE INCENTRE IN
AUDIO
OUT
DIGITAL
AUDIO
OUT
AUDIO
OUT
Wired rear loudspeakers
When no wireless RF surround sound is possible or when there
is too much interference you can still enjoy Dolby Pro Logic II
and Dolby Digital surround sound by connecting the wireless
receiver box to the TV with a stereo cinch to stereo 3.5 mm
jack cable.
&Connect the (not supplied) cable to the AUDIO IN (TV)
connector 4at the wireless receiver box and the Rand L
surround outputs at the back of the TV.
éSelect Off in the Wireless surround menu item of the Setup,
Speakers menu, p. 9.
28
Side connections Camera or Camcorder
&Connect your camera or camcorder as shown.
éConnect to VIDEO 2and AUDIO L 3for mono
equipment. For stereo equipment also connect AUDIO R 3.
S-VHS quality with an S-VHS camcorder is obtained by
connecting the S-VHS cables with the S-video input 1and
audio inputs 3.
Do not connect cable 1and 2at the same time.This may cause
picture distortion !
Headphone
&Insert the plug into the headphone socket Las shown.
éPress ¬on the remote control to switch off the internal
loudspeakers of the TV.
The headphone impedance must be between 8 and 4000 Ohm.The
headphone socket has a 3.5 mm jack.
In the Sound menu select
Headphone volume to adjust the
headphone volume.
Note:
When Dual screen/PIP is activated (see p. 16):
- if the main screen displays a TV channel picture, you hear the sound
from the Dual screen/PIP picture through your headphone.
AUDIO
VIDEO
S•VIDEO
1 2 3
®
AUDIO inAUDIO in
(TV)(TV)
2.2.8V RMS8V RMS
AUDIO in
(TV)
2.8V RMS
13V DC inVDCin13V DC in
LR
4 /15W4/15W
LR
4 /15W
122
1
2 3
41
23
4
33
44
SURROUND
Connect extra subwoofer
To enhance the sound reproduction of your TV you can connect
an externally powered subwoofer (between 20 and 250 Hz).
&Connect the audio cable of the external subwoofer to the
SUBW. socket at the back of your TV.
éSelect External in the Setup, Speakers menu, Subwoofer, p. 9.
For details, please refer to the subwoofer’s manual.
SUBW.

Directions for Use
EN 22 EM6E AB3.
31
Care of the screen Clean the TV with a slightly damp soft cloth. Do not use abrasive solvent as it can
damage the TV screen.
Poor Picture • Have you selected the correct TV system in the manual installation menu ?
• Is your TV or house aerial located too close to loudspeakers, non-earthed audio
equipment or neon lights, etc.?
• Mountains or high buildings can cause double pictures or ghost images.
Sometimes you can improve the picture quality by changing the direction of the
aerial.
• Is the picture or teletext unrecognisable? Check if you have entered the correct
frequency. See Installation, p. 8.
• Are brightness, sharpness and contrast out of adjustment? Select Factory
settings in the Setup, General menu, p. 10.
• Sometimes poor picture quality is possible when having activated an S-VHS
camera or camcorder connected to the right side of your TV and another
peripheral is connected to one of the externals at the same time. In this case
switch off one of the other peripherals.
No picture • Is the aerial connected properly?
• Are the plugs tightly connected in the aerial socket?
• Is the aerial cable in good condition and does it have suitable plugs?
• Press the DVD key on the remote control to switch to TV mode.
Digital distortion The low quality of some digital picture material may be the cause of digital image
distortion. In this case select the Soft setting using the Picture menu, Smart
Picture, without changing the picture settings manually.
Moistured lense The lense may cloud over when the DVD player is suddenly moved from cold to
problem warm surroundings. Playing a CD/DVD is not possible then. Leave the TV in a
warm environment for two hours before use, so the moisture can evaporate.
Cleaning DVD/ Some problems may occur because the disc inside the recorder is dirty.To avoid
Audio disc these problems clean your discs regularly with a cleaning cloth.Wipe the disc
from the centre out.
Caution : do not use solvents such as benzine, thinner, commercially available
cleaners, or antistatic spray intended for analogue discs. Do not use commercially
available cleaning disc to clean the lens, as these discs may damage the optical unit.
No sound • No sound on any channel? Check the volume isn’t at minimum.
• Is the sound interrupted with the mute key
¬ ? Check if your speaker
configuration corresponds with the selections made in the Setup menu,
Speakers, p. 9.
• No sound from the connected audio receiver? Select Centre input Off in the
Source menu, see p. 11.
No Surround • Perhaps the channel is not broadcasting good quality surround sound.
sound • To avoid interfered picture the wireless transmitter might be automatically
switched off. Use the wired back up solution, p. 28.
• No sound from the rear speakers or the centre speakers? Select an appropriate
surround mode, according to the broadcasted sound signal or adjust the volume
or check if the wireless transmitter is properly connected.
See Surround Modes, p. 14.
No solution found Switch your TV off and then on again once. Never attempt to repair a defective
for your picture or TV yourself. Check with your dealer or call a TV technician.
sound problem ?
Tips
30
B
®
®
®
®
hb q
0
i0
879
546
2
Ì
Q
U
®
v
º
S
bæ
MENU
+
-
V¬
+
-
P
13
LCD
DVD
PLAYER DISC
RADIO MENU SET UP
Select
VCR DVD SAT AMP CD
OK
Active Control
Ò‡ π
†
T/C
Audio- and video equipment keys
This system remote control operates the following Philips equipment:TV,VCR,
DVD, SAT (RC5),AMP (+TUNER), CD;
Press the
Select key to operate any of the equipment indicated in the display.
Another device can be selected by pressing Select repeatedly within 2 seconds.The
led will blink slowly to indicate the device.
Press one of the keys on the remote control to operate the peripheral equipment.
To return to TV mode press
Select while the led is blinking.
When no action is taken within 60 seconds, the remote goes back to TV mode.
Note: When the
Select key is pressed and hold for more than 2 seconds, the RC5/RC6
system select command is transmitted.
Bto switch to standby
®for record,
Òfor rewind (VCR,CD);
search down (DVD,AMP)
‡for stop
πfor play
†for fast forward (VCR,CD);
search up (DVD/AMP)
æto select your choice of subtitle
language (DVD);
RDS news/TA (AMP);
to shuffle play (CD)
bto select a DVD title;
RDS display (AMP);
info on screen (CD)
idisplay information
MENU to switch the menu on or off
- P + for chapter, channel, track
selection
0 to 9 digit entry
0tape index (VCR),
select a DVD chapter,
select a frequency (AMP)
UVCR timer
Qsurround on/off (AMP,CD)
cursor up/down
to select the next or the
previous disc (CD)
cursor left/right
to select the previous or
following track (CD)
search up/down (AMP)
Record with your recorder with EasyLink
In TV mode, it is possible to start a direct recording of the programme
which is being displayed on the TV screen.
Continue to press the ®record key on the remote control for more than
2 seconds.
Note:
Switching programme numbers on your TV does not disturb recording !
When recording a programme from a peripheral connected to EXT. 1,3,4or
SIDE, you can not select another TV programme on the screen.
Additionally the DVD, SAT and CD indicator can be programmed to operate the
DVD-R, SAT (RC6), CD-R instead.
&Press the Select key repeatedly until no LED is lit.
éTo program DVD-R, press the OK key + digit 2.
To program SAT (RC6), press the OK key + digit 4.
To program CD-R, press the OK key + digit 6.
From now on, when the corresponding (DVD,SAT,CD) indicator is selected,
the remote control will operate your DVD-R, SAT (RC6) or CD-R.
Note:To return to the modes programmed in the factory, either remove the batteries for a
few minutes, or press the OK key + digit 1 (DVD mode); or + digit 3 (SAT-RC5) or +
digit 5 (CD mode).