Philips DC220/98 User manual

Register your product and get support at
www.philips.com/welcome
DC220/98
EN User manual

2
Contents
1 Important 4
Safety 4
Notice 6
2 Your Clock Radio for iPhone/iPod 8
Introduction 8
What’s in the box 8
Overview of the main unit 9
3 Get started 12
Connect power 12
Set time and date 13
Turn on 14
4 Play 15
Play from iPod/iPhone 15
Play from an external device 16
5 Listen to radio 17
Tune to a radio station 17
Program radio stations automatically 18
Program radio stations manually 18
Select a preset radio station 19
6 Other features 20
Set the alarm timer 20
Backup Battery Mode 22
EN

3
Set the sleep timer 23
Adjust display brightness 24
7 Adjust sound 25
Adjust volume level 25
Enhance bass 25
8 Product information 26
Specifications 26
9 Troubleshooting 28
English
EN

4
1 Important
Safety
aRead these instructions.
bKeep these instructions.
cHeed all warnings.
dFollow all instructions.
eDo not use this apparatus near water.
fClean only with dry cloth.
gDo not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
hDo not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
iProtect the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
jOnly use attachments/accessories specified by the
manufacturer.
kUnplug this apparatus during lightning storms or when
unused for long periods of time.
lRefer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has
EN

5
been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
mBattery usage CAUTION – To prevent battery leakage
which may result in bodily injury, property damage, or
damage to the unit:
Install all batteries correctly, + and - as marked on the
unit.
Do not mix batteries (old and new or carbon and
alkaline, etc.).
Remove batteries when the unit is not used for a long
time.
nApparatus shall not be exposed to dripping or splashing.
oDo not place any sources of danger on the apparatus (e.g.
liquid filled objects, lighted candles).
pWhere the MAINS plug or an appliance coupler is used as
the disconnect device, the disconnect device shall remain
readily operable.
Warning
Never remove the casing of this apparatus.
Never lubricate any part of this apparatus.
Never place this apparatus on other electrical equipment.
Keep this apparatus away from direct sunlight, naked flames or heat.
Ensure that you always have easy access to the power cord, plug or
adaptor to disconnect the apparatus from the power.
•
•
•
•
•
•
•
•
English
EN

6
Notice
Any changes or modifications made to this device that are not
expressly approved by Philips Consumer Lifestyle may void the
user’s authority to operate the equipment.
This product complies with the radio interference requirements of
the European Community.
Your product is designed and manufactured with high quality
materials and components, which can be recycled and reused.
When this crossed-out wheeled bin symbol is attached to a
product it means that the product is covered by the European
Directive 2002/96/EC.
Please inform yourself about the local separate collection system
for electrical and electronic products.
Please act according to your local rules and do not dispose of
your old products with your normal household waste. Correct
disposal of your old product helps to prevent potential negative
consequences for the environment and human health.
Your product contains batteries covered by the European
Directive 2006/66/EC, which cannot be disposed with normal
household waste.Please inform yourself about the local rules on
separate collection of batteries because correct disposal helps to
EN

7
prevent negative consequences for the environmental and human
health.
Environmental information
All unnecessary packaging has been omitted. We have tried
to make the packaging easy to separate into three materials:
cardboard (box), polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can be recycled and
reused if disassembled by a specialized company. Please observe
the local regulations regarding the disposal of packaging materials,
exhausted batteries and old equipment.
Note
The type plate is located on the bottom of the apparatus.•
English
EN

8
2 Your Clock Radio for
iPhone/iPod
Congratulations on your purchase, and welcome to Philips! To fully
benefit from the support that Philips offers, register your product at
www.philips.com/welcome.
Introduction
With this unit, you can enjoy audio from the iPod, iPhone, other
audio devices, or the radio.
The radio, iPod, or iPhone can be set as the alarm timer.You can set
two alarm timers to go off at different time.
What’s in the box
Check and identify the contents of your package:
Main unit
AC power cord
AC power adaptor
MP3 LINK cable
User manual
Quick start guide
•
•
•
•
•
•
EN

9
Overview of the main unit
Top View
aPOWER
Turn on the unit or switch to standby mode.
Deactivate the sleep timer.
Stop alarm.
bDATE • AUTO TUNE/TIME SET
Set the date and clock.
Search and program radio stations automatically.
cAL 1/AL 2
Set the alarm timer.
Turn off the alarm tone.
View alarm settings.
•
•
•
•
•
•
•
•
REPEAT ALARM
BRIGHTNESS CONTROL
E
M
U
LOV
TUNING
TUNING
SOURCE SLEEP AL2
AL1
BBD
DOCK for
a b c d e
l jk i gh f
REPEAT ALARM
BRIGHTNESS CONTROL
E
M
U
LOV
TUNING
TUNING
SOURCE SLEEP AL2
AL1
BBD
DOCK for
a b c d e
l jk i gh f
English
EN

10
d/
Skip to the previous/next audio file.
Search within an audio file.
Select a preset radio station.
Adjust time.
eTUNING +/-
Tune to a radio station.
Adjust time.
fVOL +/-
Adjust volume.
g
Start or pause iPod/iPhone play.
hREPEAT ALARM/BRIGHTNESS CONTROL
Repeat the alarm.
Adjust the display brightness.
iiPod/iPhone dock
Load an iPod/iPhone.
jDBB
Turn on or off dynamic bass enhancement.
kSLEEP
Set the sleep timer.
lSOURCE
Select a source: iPod/iPhone, FM tuner or AUX.
Back View
•
•
•
•
•
•
•
•
•
•
•
•
•
•
EN

11
mBackup battery compartment
Insert 2 pieces of AAA/R03/UM4, 1.5V batteries.
nFM AERIAL
Improve FM reception.
oMP3-LINK
Jack for an external audio device.
pDC IN
Power supply socket.
•
•
•
•
OPEN
MP3 LINK FM AERIAL
9V DC IN
n
o
m
p
OPEN
MP3 LINK FM AERIAL
9V DC IN
n
o
m
p
English
EN

12
3 Get started
Caution
Use of controls or adjustments or performance of procedures other
than herein may result in hazardous radiation exposure or other
unsafe operation.
•
Always follow the instructions in this chapter in sequence.
If you contact Philips, you will be asked for the model and serial
number of this apparatus.The model number and serial number are
on the bottom of the apparatus.Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Connect power
Caution
Risk of product damage! Ensure that the power voltage corresponds
to the voltage printed on the back or underside of the apparatus.
Risk of electric shock! When you unplug the AC adaptor, always pull
the plug from the socket. Never pull the cord.
Before connecting the power plug, ensure you have completed all
other connections.
•
•
•
1Connect the AC power cord and the AC adaptor.
2Connect the AC adaptor to the DC IN socket on the main
unit.
3Connect the power plug of the AC power cord to the wall
outlet.
EN

13
Note
The voltage and power rating information is located on the bottom
of the unit.
•
Set time and date
1Dock the iPod/iPhone on the unit.
2Open the iPod/iPhone.
Time and date information on the iPod/iPhone transfers to
the unit automatically.
To set time and date manually:
1In standby mode, press and hold DATE • AUTO TUNE/TIME
SET for 2 seconds.
[24HR] begins to blink.
2PressTUNING +/- or /to select 12/24 hour format.
3Press DATE • AUTO TUNE/TIME SET to confirm.
The hour digits begin to blink.
4Press TUNING +/- or /to set the hour.
5Press DATE • AUTO TUNE/TIME SETto confirm.
The minute digits begin to blink.
»
•
»
»
»
ab
c
ab
c
English
EN

14
6Repeat steps 4-5 to set the minute, year, month, and day.
Turn on
1Press POWER.
The unit switches to the last selected source.
Switch to standby
1Press POWER again to switch the unit to standby mode.
The time and date (if set) appear on the display panel.
»
»
EN

15
4 Play
Play from iPod/iPhone
You can enjoy audio from iPod/iPhone through this unit.
Compatible iPod/iPhone
Apple iPod and iPhone models with a 30-pin dock connector:
iPod classic, iPod touch, iPod nano, iPod 5th generation
(video), iPod with color display, iPod mini.
iPhone, iPhone 3G, iPhone 3GS.
Listen to the iPod/iPhone
1Place the iPod/iPhone into the dock.
2Press SOURCE repeatedly to select iPod/iPhone source.
The connected iPod/iPhone plays automatically.
To pause/resume play, press .
To skip to a track, press / .
To search during play, press and hold / , then release
to resume normal play.
Charge the iPod/iPhone
When the unit is connected to power, the docked iPod/iPhone
begins to charge.
•
•
»
•
•
•
English
EN

16
Tip
For certain iPod models, it may take up to a minute before the
charging indication appears.
•
Play from an external device
You can also listen to an external audio device through this unit.
1Press SOURCE repeatedly to select AUX source.
2Connect the supplied MP3 link cable to:
the MP3 LINK jack (3.5mm) on the back of the unit.
the headphone jack on an external device.
3Start to play the device (see the device user manual).
•
•
EN

17
5 Listen to radio
Note
Only FM radio reception is available on this unit.•
Tune to a radio station
Tip
Position the antenna as far as possible from TV, VCR or other
radiation source.
•
Note
For optimal reception, fully extend and adjust the position of the
antenna.
•
1Press SOURCE to select FM.
2Press and hold TUNING +/- for more than 2 seconds.
[SRCH] (search) displays.
The radio tunes to a station with strong reception
automatically.
3Repeat step 2 to tune to more stations.
To tune to a weak station, press TUNING +/- repeatedly
until you find optimal reception.
»
»
•
English
EN

18
Program radio stations automatically
You can program a maximum of 20 preset radio stations.
1In the tuner mode, press and hold DATE • AUTO TUNE/
TIME SET for more than 2 seconds to activate automatic
program mode.
[AUTO] (auto) is displayed.
All available stations are programmed in the order of
waveband reception strength.
The first programmed radio station is broadcast
automatically.
Program radio stations manually
You can program a maximum of 20 preset radio stations.
1Tune to a radio station.
2Press DATE • AUTO TUNE/TIME SET to activate the
program mode.
PR01 begins to blink.
3Press DATE • AUTO TUNE/TIME SET to confirm.
4Repeat the above steps to program other stations.
Tip
To overwrite a programmed station, store another station in its
place.
•
»
»
»
»
EN

19
Select a preset radio station
1Press /to select a preset program number.
English
EN

20
6 Other features
Set the alarm timer
You can set two alarms which go off at different time.
1Ensure that you have set the clock correctly.
2Press and hold AL 1 or AL 2 for 2 seconds.
[AL1] or [AL2] begin to blink.
3Press SOURCE repeatedly to select an alarm sound source:
iPod/iPhone, iPod/iPhone playlist, FM tuner, or buzzer.
4Press AL 1 or AL 2.
Hour digits begin to blink.
5Press TUNING +/- or /repeatedly to set the hour.
6Press AL 1 or AL 2 to confirm.
Minute digits begin to blink.
7Repeat steps 5-6 to set the minute.
8Repeat steps 5-6 to select whether to ring alarm the whole
week, on weekdays, or at weekend.
9Repeat steps 5-6 to set the alarm volume.
Tip
If you want to wake up to specific music track(s) on iPhone/iPod, after
set iPhone/iPod playlist as the wake up source on the unit, you need
to create a playlist called ‘PHILIPS’ via iTunes and copy the track(s) to
this new ‘PHILIPS’ playlist.
If no playlist is created or there is no song in the playlist, the unit will
play the music track according to the last music playback preference
on iPhone/iPod.
•
•
»
»
»
EN