Philips HD8745/18 User manual

Type HD8743 / HD8745 / HD8747 - Cod.15002552 Rev.00 del 15-03-10
The manufacturer reserves the right to change the features of the product without prior notice.
www.philips.com/saeco
EN
SAECO INTERNATIONAL GROUP S.P.A
ViaTorretta, 240 - 40041 Gaggio Montano (Bo) - Italy
declare under our responsibility that the product :
AUTOMATIC COFFEE MAKER
SUP 033R
to whichthis declaration relatesis inconformity withthe following standards
or other normative documents :
• Safety of household and electrical appliances - General requirements
EN 60335-1(2002) + A1(2004) + A2(2006) + A11(2004) + A12(2006)+
A13(2008)
• Safety of household and electrical appliances - Part 2-15
Particular requirements for appliances for heating liquids
EN 60335-2-15(2002) + A1(2005) + A2 (2008).
• Household and similar electrical appliances - Electromagnetic elds - methods
for evaluation and measurement - EN 62233 (2008).
• Household and similar electrical appliances - safety - Part 2-14
Particular requirements for kitchen machines
EN 60335-2-14 (2006) + A1 (2008).
• Electromagnetic compatibility (EMC) - Requirements for household appliances
, electric tools and similar apparatus - Part 1 - Emission EN 55014-1 (2006).
• Electromagnetic compatibility (EMC) - Part. 3^ Limits - Section 2 : Limits for
harmonic current emissions (equipment input current ≤ 16A for phase)
EN 61000-3-2 (2006)
• Electromagnetic compatibility (EMC) - Part 3^ : Limits - Section 3 : Limitation
of voltage changes , voltage uctuations and icker in public low - voltage sup-
ply systems , for equipment with rated current ≤ 16 A for phase and not subject
to conditional connection
EN 61000-3-3 (1995)+ corr.(1997) +A1 (2001) + A2 (2005).
• Electromagnetic compatibility - Requirements for household appliances , elec-
tric tools and similar apparatus - Part 2. Immunity - Product family standard
EN 55014-2 (1997) + A1 (2001)
following the provisions of the Directives: EC 2006/95 , EC 2004/108.
EC DECLARATION OF CONFORMITY
YEAR 09
EC 2006/95, EC 2004/108,
R & D Manager
Mr.Andrea Castellani
Gaggio Montano
li, 28/04/2009

OPERATING INSTRUCTIONS
READ THESE OPERATING INSTRUCTIONS CAREFULLY BEFORE USINGTHE MACHINE.
Register your product and get support at
www.philips.com/welcome
EN
English
Type HD8743 / HD8745 / HD8747
SUP 033R

• 2 •
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be
followed, including the following:
1. Read all instructions.
2. Do not touch hot surfaces. Use handles or knobs.
3. To protect against fire, electric shock and injury to persons do not immerse
cord, plugs, or appliance in water or other liquid.
4. Close supervision is necessary when the appliance is used by or near
children.
5. Unplug from outlet when not in use and before cleaning. Allow to cool
before putting on or taking off parts, and before cleaning the appliance.
6. Do not operate any appliance with a damaged cord or plug or after the
appliance malfunctions, or has been damaged in any manner. Return
appliance to the nearest authorized service facility for examination, repair
or adjustment.
7. The use of accessory attachments not recommended by the appliance
manufacturer may result in fire, electric shock or injury to persons.
8. Do not use outdoors.
9. Do not let cord hang over edge of table or counter, or touch hot
surfaces.
10.Do not place on or near a hot gas or electric burner, or in a heated
oven.
11.Always attach plug to appliance first, then plug cord into wall outlet. To
disconnect, turn any control to “off”, then remove plug from wall outlet.
12.Do not use appliance other than for intended use.
13.Save these instructions.
SAVE THESE INSTRUCTIONS

• 3 •
English
CAUTION
This appliance is for household use only. Any servicing, other than cleaning
and user maintenance, should be performed by an authorized service center.
Do not immerse machine in water. To reduce the risk of fire or electric shock,
do not disassemble the machine. There are no parts inside the machine
serviceable by the user. Repair should be done by authorized service personnel
only.
1Check voltage to be sure that the voltage indicated on the nameplate
corresponds with your voltage.
2Never use warm or hot water to fill the water tank. Use cold water only.
3Keep your hands and the cord away from hot parts of the appliance during
operation.
4Never clean with scrubbing powders or harsh cleaners. Simply use a soft
cloth dampened with water.
5For optimal taste of your coffee, use purified or bottled water. Periodic
descaling is still recommended every 2-3 months.
6Do not use caramelized or flavored coffee beans.
INSTRUCTIONS FOR THE POWER
SUPPLY CORD
A. A short power-supply cord (or detachable power-supply cord) is to be
provided to reduce risks resulting from becoming entangled in or tripping
over a longer cord.
B. Longer detachable power-supply cords or extension cords are available
and may used if care is exercised in their use.
C. If a long detachable power-supply cord or extension cord is used,
1. The marked electrical rating of the detachable power-supply cord or extension
cord should be at least as great as the electrical rating of the appliance
2. If the appliance is of the grounded type, the extension cord should be a
grounding-type 3-wire cord, and
3. The longer cord should be arranged so that it will not drape over the counter top
or table top where it can be pulled on by children or tripped over.

• 4 •
GENERAL INFORMATION
The coee machine is suitable for preparing espresso coees using whole coee beans and is
equipped with a device to dispense steam and hot water.
The machine is designed for domestic use and is not suitable for heavy or professional use.
Keep these operating instructions in a safe place and make them available to anyone
who may use the coee machine.
For further information or in case of problems that are not included or not completely explai-
ned in these instructions, please contact the Saeco customer service or an authorized service
center.
Warning. No liability is assumed for damage caused by:
• Incorrect use not in accordance with the intended uses;
• Repairs not carried out by authorized service centers;
• Tampering with the power cord;
• Tampering with any part of the machine;
• Storage or use of themachine at a temperature outside theoperating temperature
range (+15°C / +45°C);
• Use of non-original spare parts and accessories.
In these cases, the warranty shall be deemed null and void.
SAFETY REGULATIONS
Never allow water to come into contact with any of the electrical parts of the
machine: Danger of short circuit! Steam and hot water may cause scalding! Do
not direct the steam or hot water jet towards body parts. Carefully handle the steam/
hot water spout by means of the special handle: Danger of scalding!
Intended Use
The coee machine is intended for domestic use only. Do not make any technical changes or use
the machine for unauthorized purposes since this would create serious hazards!The appliance is
not to be used by persons (including children) with reduced physical, mental or sensory abilities
or with limited experience and/or expertise, unless they are supervised by a person responsible
for their safety, or they are instructed by this person on how to properly use the machine.
Power Supply - Power Cord
Only connect the coee machine to a suitable power socket.
The voltage must correspond to the indication on the machine label located on the inside of
service door.
Never use the coee machine if the power cord is defective or damaged.
If damaged, the power cord must be replaced by the manufacturer or an authorized service
center. Do not pass the power cord around corners, over sharp edges or over hot objects and
keep it away from oil. Do not use the power cord to carry or pull the coee machine.
Do not pull out the plug by the power cord or touch it with wet hands. Do not let the power cord
hang freely from tables or shelves.
For the Safety of Others
Keep children under control to prevent them from playing with the product. Children are not
aware of the risks related to electric household appliances. Do not leave the machine packaging
materials within the reach of children.

• 5 •
English
Danger of Burns
Never direct the jet of hot steam and/or hot water towards yourself or others: Danger of scal-
ding! Always use the handles or knobs provided.
Machine Location - Suitable Location for Operation and Maintenance
For best use, it is recommended to:
• Choose a safe, level surface, where there will be no danger of overturning it or being inju-
red.
• Choose a location that is suciently well-lit, clean and near an easily reachable socket.
• Allow for a minimum distance from the sides of the machine as shown in the illustration;
• During machine turning on/o, it is recommended to place an empty glass under the di-
spensing spout.
Do not keep the machine at a temperature below 0°C (32°F). Frost may damage the machine.
Do not use the coee machine outdoors. In order to prevent its housing from melting or being
damaged, do not place the machine on very hot surfaces or close to open ames.
Storing the Machine - Cleaning
Before cleaning the machine, turn it o by pressing the ON/OFF button, then remove the plug
from the socket.
Wait for the machine to cool down.
Never immerse the machine in water!
It is strictly forbidden to tamper with the internal parts of the machine.
Water left in the tank for several days should not be consumed. Wash the tank and ll it with
fresh drinking water.
If the machine is to remain inactive for a long time, dispense water from the steam wand, and
carefully clean the Pannarello (if supplied), then turn it o and unplug it. Store it in a dry place,
out of the reach of children. Keep it protected from dust and dirt.
Repairs / Maintenance
In case of failure, problems or a suspected fault resulting from the falling of the machine, im-
mediately remove the plug from the socket. Never attempt to operate a faulty machine.
Servicing and repairs may only be carried out by authorized service centers. All liability for
damages resulting from work not carried out by professionals is declined.
Fire Safety Precautions
In case of re, use carbon dioxide (CO2) extinguishers. Do not use water or dry powder extin-
guishers.

• 6 •
Coee bean hopper lid
Grinder adjustment key
Power cord
Brew group lubricant
Double coee light and brewed
coee length setting Temperature light
Water tank level
light
Warning light
Small coee button
Large coee button
Control dial
ON/OFF button
Pannarello (optional - only available
for certain models)
Brew group
Dregdrawer
Service door
Coee bean hopper
Dispensing spout
Grill
Full drip tray indicator
Drip tray
Water tank
Hot water/steam wand
Protective handle
Control panel

• 7 •
English
INSTALLATION
For your safety and the safety of
others, carefully follow the instruc-
tions provided in the “Safety Regula-
tions” section.
Machine Packaging
The original packaging has been designed
and constructed to protect the machine
during transport. We recommend keeping
the packaging material for possible future
transport.
Preliminary Operations
• Remove the coee bean hopper lid and
the drip tray with grill from the packa-
ging.
• Remove the coee machine from the
packaging and position it in a place that
meetstherequirementsdescribed inthe
“Safety Regulations”.
• Place the drip tray with grill into its
appropriate seat on the machine. Make
sure it is fully inserted to its limit stop.
• Replace the coee bean hopper lid.
Note: Insert the plug into the
socket only when indicated
and check that the ON/OFF button is
not pressed.
ImportantNote:Carefullyread
the explanations of all the
warnings displayed by the machine
to the user by means of the lights on
the control panel (see section “Control
Panel Lights”).
NEVER remove the drip tray
whenthe machineisturned on.
Wait a couple of minutes after turning
on/o, sincethe machine will carry out
a rinse/self-cleaning cycle (see section
“Rinse/Self-Cleaning Cycle”).
MAX
MIN
• Remove the water tank.
• Rinse and ll it with fresh water ma-
king sure that it is not lled exceeding
the MAX level indicated in the water
tank. Put the water tank back in its
seat to its limit stop.
Use only fresh, non-sparkling
water to fill the tank. Hot
wateror anyotherliquid maydamage
the tank and/or the machine. Do not
turn on the machine when the tank
is empty: Make sure there is enough
water in the tank.
• Remove the coee bean hopper lid.
Note: The hopper may be
fitted with different safety
features according to the regula-
tions of the country of use of the
machine.
• Slowly pour the coee beans into the
hopper.
Only coee beans must be put
into the coee bean hopper.
Ground coffee, instant coffee or
any other object may damage the
machine.
• Replace the lid on the coee bean hop-
per.
• Insert the plug into the socket located
on the back of the machine.
• Insert the plug of the other end of the
power cord into a wall socket with
suitable power voltage.

• 8 •
• Make sure control dial is on “ ” posi-
tion; if this is not the case, set it to that
position.
• Simply press the ON/OFF button to
turn the machine on; the “ “ light will
begin to blink rapidly indicating that
the water circuit must be primed.
Note: Before starting the
machine for the first time,
prime the water circuit.
Using the machine for the
first time or after a long
period of inactivity.
These simple operations will make it pos-
sible to always brew excellent coee.
They have to be performed:
A) At rst start-up.
B) When the machine remains inactive
for a long time (more than 2 weeks).
Dispensed water mustbe em-
ptied into an adequate drain.
It is not suitable for food use.
1 Place a container under the dispensing
spout.
2 Before starting the procedure, check
that the“ “ light is steady on.
Priming the Water Circuit
• To prime the water circuit, place a
container under the hot water / steam
wand.
• Turn the control dial clockwise to set it
to the “ ”position and wait.
When water steadilycomes out and the
““ light will blink slowly - indicating
that the knob can be turned o - rotate
the control dial counter-clockwise to set
it back to the “ ”position.
• At this point the “ “ light begins to
blink slowly, indicating that the ma-
chine is in warm-up mode.
When warm-up is complete,
the machine performs a rinse
cycle of the internal circuits.
• When the above steps are complete,
check that the “ “ light is on steady.
The machine is now ready for use.
• To brew coee, dispense hot water or
steam, and for a proper use of the ma-
chine, carefully follow the instructions
provided.
3 Brew one coee. Press and release the
““ button. The machine starts
brewing coee.
4 Wait until brewing is complete and
remove the container.
5 Placeacontainerunderthesteam wand
(Pannarello, if supplied).
6 Turn the selector switch clockwise to
the“ ”position.
7 Dispense water until the no water
signal is displayed. The “ ”light re-
mains steady on.
Now turn the selector switch counter-
clockwise to set it back to the“ ” po-
sition.
8 At the end, fill the water tank again.
Then the products can be brewed as
described in the following sections

• 9 •
English
+
Blinking
Steady on
Rinse/Self-Cleaning Cycle
This cycle will rinse the internal circuits
with fresh water.
The cycle is carried out:
• At machine start (with cold boiler)
• After priming the water circuit (with
cold boiler)
• During the standby preparation phase
(if a coee product has been brewed)
• During the turning off phase after
pressing the ON/OFF button (if a coee
product has been brewed).
Note: Before dispensing,
place a container beneath the
dispensing spout.
A small amount of water will be dispensed
which will rinse and heat all the machine
components; in this phase the indicator
lights ash counter-clockwise.
Wait for the cycle to nish automatically.
You can stop dispensing as well, by pres-
sing either coee button.
ADJUSTMENTS
The machine that you have bought allows
for certain adjustments that will permit
you to use it to its full potential.
Saeco Adapting System
Coffee is a natural product and its cha-
racteristics may change according to its
origin, blend and roast. The Saeco coee
machine is equipped with a self-adjusting
system that allows the use of all types of
coee beans available on the market (non
caramelized).
• The machine automatically adjusts
itself in order to optimize the extrac-
tion of the coffee, ensuring perfect
compression of the beans to obtain a
creamy espressocoeethatwill release
all the aromas, regardless of the type of
coee used.
• The optimization process is a learning
process that requires the brewing of a
certain number of coees to allow the
machine to adjust the compactness of
the ground coee.
• Attention should be given to spe-
cial blends, which require grinder
adjustments in order to optimize the
extraction of the coee (see section
“Coee Grinder Adjustment”).