Philips HD8829/09 User manual

HD8829
HD8829_FRONT-COVER_A5_BW.indd 1 01-03-16 12:42

English 5
Polski 35

2
1
X
X
Aroma plus
Hot water
Espresso
Memo Memo Memo
Calc
clean
Coffee
Cappuccino
Milk clean
19
20
4
5
6
1 2 3
13
11
12
10
31
33
18
21
22
23
29
15
14
30
32
7 8 9
2827
17 16
34
37
38
36
35
39
24
25
26
40

English
Contents
Introduction 6
Important 6
Warning 6
Caution 7
Electromagnetic fields (EMF) 7
Machine overview (Fig. 1) 7
First installation 8
Circuit priming 10
Automatic rinsing cycle 10
Manual rinsing cycle 11
Measuring the water hardness 12
Installing the Intenza+ water filter 12
Using the machine 14
Beverage types and lengths 14
Adjusting the coffee dispensing spout 14
Brewing coffee 14
Brewing 1 cup of espresso and coffee 14
Brewing 2 cups of espresso and coffee 15
How to place and remove the automatic milk frother 15
Brewing cappuccino 16
Frothing milk 16
Hot water 17
Inserting and removing the hot water dispensing spout 17
Dispensing hot water 17
Adjusting quantity and taste 17
Saeco Adapting System 17
Activating the aroma plus function 18
Adjusting coffee length with the MEMO function 18
Adjusting the cappuccino volume with the MEMO function 18
Adjusting the grinder settings 18
Maintenance and care 19
Cleaning the drip tray and the coffee grounds container 19
Cleaning the brew group 19
Lubrication 21
Quick clean of the milk system 22
Daily cleaning of the automatic milk frother 22
Monthly cleaning of the automatic milk frother 22
Descaling 24
Descaling procedure 25
Interruption of the descaling cycle 26
Meaning of light signals 26
Troubleshooting 30
Recycling 33
Guarantee and support 33
Ordering maintenance products 33
Technical specifications 33
5
English

Introduction
Congratulations on your purchase of a Philips fully automatic coffee
machine with Automatic Milk Frother! To fully benefit from the support that
Philips offers, please register your product at www.philips.com/welcome.
The machine is suitable for preparing espresso coffee using whole coffee
beans. You can use the automatic milk frother to prepare perfect
cappuccino in a quick and easy way.In this user manual you will find all the
information you need to install, use, clean and descale your machine.
If you experience any future problems with your machine or have other
questions, have a look on our support page at www.philips.com/support.
Here you can find all detailed information on cleaning and maintenance,
frequently asked questions, support movies and the user manuals.
Important
This machine is equipped with safety features. Nevertheless, read and
follow the safety instructions carefully and only use the machine as
described in these instructions, to avoid accidental injury or damage due to
improper use of the machine. Keep this user manual for future reference.
Warning
-Connect the machine to a wall socket with a voltage matching the
technical specifications of the machine.
-Connect the machine to an earthed wall socket.
-Do not let the power cord hang over the edge of a table or counter, or
touch hot surfaces.
-Never immerse the machine, mains plug or power cord in water (danger
of electrical shock).
-Do not pour liquids on the power cord connector.
-Never direct the hot water jet towards body parts: danger of burns.
-Do not touch hot surfaces. Use handles and knobs.
-Switch off the machine with the main switch located on the back and
remove the mains plug from the socket:
-If a malfunction occurs.
-If the machine will not be used for a long time.
-Before cleaning the machine.
-Pull on the plug, not on the power cord.
-Do not touch the mains plug with wet hands.
-Do not use the machine if the mains plug, the power cord or the machine
itself is damaged.
-Do not make any modifications to the machine or its power cord.
-Only have repairs carried out by a service center authorized by Philips to
avoid a hazard.
-The machine should not be used by children younger than 8 years old.
6English

-This machine can be used by children aged from 8 years and above and
by persons with reduced physical, sensory or mental capabilities or lack
of experience and knowledge if they have been given supervision or
instruction concerning use of the machine in a safe way and if they
understand the hazards involved.
-Cleaning and user maintenance shall not be made by children unless
they are older than 8 and supervised.
-Keep the machine and its cord out of the reach of children aged less than
8 years.
-Children should be supervised to ensure that they do not play with the
machine.
-Never insert fingers or other objects in the coffee grinder.
Caution
-This machine is intended for normal household use only. It is not
intended for use in environments such as staff kitchens of shops, offices,
farms or other work environments.
-Always put the machine on a flat and stable surface. Keep it in upright
position, also during transport.
-Do not place the machine on a hotplate or directly next to a hot oven,
heater or similar source of heat.
-Only put roasted coffee beans in the bean hopper. If ground coffee,
instant coffee, raw coffee beans or any other substance is put in the
coffee bean hopper, it may cause damage to the machine.
-Let the machine cool down before inserting or removing any parts. The
heating surfaces may retain residual heat after use.
-Never fill the water tank with warm, hot or sparkling water, as this may
cause damage to the water tank and the machine.
-Never use souring pads, abrasive cleaning agents or aggressive liquids
such as petrol or acetone to clean the machine. Simply use a soft cloth
dampened with water.
-Descale your machine regularly. The machine indicates when descaling is
needed. Not doing this will make your appliance stop working properly.
In this case repair is not covered under your guarantee.
-Do not keep the machine at temperatures below 0°C.Water left in the
heating system may freeze and cause damage.
-Do not leave water in the water tank when the machine is not used over
a long period of time. The water can be contaminated. Use fresh water
every time you use the machine.
Electromagnetic fields (EMF)
This Philips appliance complies with all applicable standards and
regulations regarding exposure to electromagnetic fields.
Machine overview (Fig. 1)
1 ESPRESSO button
2 CAPPUCCINO button
3 COFFEE button
7
English

4 ON/OFF button
5 AROMA STRENGTH button
6 HOT WATER/ MILK CLEAN button
7 Descaling cycle light
8 CALC CLEAN button
9 Rinse cycle light
10 General warning light
11 No coffee light
12 Empty coffee grounds container light
13 No water light
14 Lid of the water tank
15 Lid of the bean hopper
16 Main switch
17 Socket for cord
18 Service door
19 Coffee dispensing spout
20 Hot water dispensing spout
21 Automatic milk frother
22 Suction tube
23 Top of the milk carafe
24 Pin on top of the milk carafe
25 Milk carafe
26 Water tank
27 Drip tray cover
28 Drip tray
29 Coffee grounds container
30 Drip tray full indicator
31 Coffee residues drawer
32 Coffee exit duct
33 Inside of service door with cleaning instructions
34 Brew group
35 Cleaning brush
36 Grease
37 Water hardness tester
38 Multifunctional tool
39 Cord
40 Grinder adjustment knob
First installation
This machine has been tested with coffee. Although it has been carefully
cleaned, there may be some coffee residues left. We guarantee, however,
that the machine is absolutely new.Like with most full-automatic machines,
you first need to brew some coffees to enable the machine to complete its
self-adjustment and get the best tasting coffee.
1Remove all packaging material from the machine.
2Place the machine on a table or worktop away from the tap, the sink and
heat sources.
Note: Leave at least 15 cm of free space above, behind and on both sides
of the machine.
Note: This machine may only be operated by a properly trained person.
Never let the machine operate unattended.
8English

15 cm
15 cm
15 cm
15 cm
15 cm
15 cm
15 cm
15 cm
MAX
CALC
CLEAN
MAX
3Rinse the water tank. Fill the water tank with fresh water to the MAX level
indication.
4Open the lid of the bean hopper. Fill the bean hopper with coffee beans
and close the lid.
Note: Do not overfill the bean hopper to avoid damage to the grinder.
Caution: Only use espresso beans. Never use ground coffee, unroasted
coffee beans or caramelized coffee beans, as this may cause damage
to the machine.
Note: Do not add pre-ground coffee, water or coffee beans in the coffee
exit duct.
2
1
5Insert mains plug into a wall socket (1) and insert the small plug into the
socket located on the back of the machine (2).
6Set the main switch to the ON position to switch on the machine.
7Insert the hot water dispensing spout.
9
English

8Press the ON/OFF button to switch on the machine.
Circuit priming
During the initial heat-up process, fresh water flows through the internal
circuit to heat up the machine. This takes a few seconds.
1Place a container under the hot water dispensing spout.
Espresso
Memo Memo
Calc
clean
Co ee
Memo
Cappuccino
2The no water light and the general warning light flash simultaneously.
-The ESPRESSO button light lights up.
Aroma plus
Hot water
Espresso
Memo Memo
Calc
clean
Coffee
Milk clean
Memo
Cappuccino
Espresso
Memo
3Press the Espresso button.
-The machine is heating up and the ESPRESSO, CAPPUCCINO and
COFFEE buttons flash simultaneously.
Automatic rinsing cycle
When the machine has heated up, it performs an automatic rinsing cycle to
clean the internal circuit with fresh water. Water flows from the coffee spout.
1Place a container under the coffee dispensing spout.
Aroma plus
Hot water
Espresso
Memo Memo
Calc
clean
Coffee
Milk clean
Memo
Cappuccino
-The ESPRESSO, CAPPUCCINO and COFFEE buttons flash
simultaneously.
-The cycle ends automatically.
10 English

2
1
X
X
Aroma plus
Hot water
Espresso
Memo Memo
Calc
clean
Coffee
Milk clean
Memo
Cappuccino
-The ESPRESSO, CAPPUCCINO, COFFEE and HOT WATER/MILK
CLEAN buttons light up continuously.
Manual rinsing cycle
During the manual rinsing cycle, the machine brews one cup of coffee to
prepare the inner circuit for use.
1Place a container under the coffee dispensing spout.
2
1
X
X
Aroma plus
Hot water
Espresso
Memo Memo
Calc
clean
Coffee
Milk clean
Memo
Cappuccino
2Make sure the ESPRESSO, CAPPUCCINO, COFFEE and HOT
WATER/MILK CLEAN buttons light up continuously.
Memo
Coee
3Press the COFFEE button.
-The machine starts to brew a cup of coffee to prepare the inner circuit
for use.This coffee is not drinkable.
4Empty the cup after the brewing cycle is finished.
5Place a container under the hot water dispensing spout.
2
1
X
X
Aroma plus
Hot water
Espresso
Memo Memo
Calc
clean
Coffee
Milk clean
Memo
Cappuccino
2
1
X
X
6Press the HOT WATER/MILK CLEAN button once. The machine starts
dispensing water.
-The HOT WATER/MILK CLEAN button flashes slowly.
7Let the machine brew hot water until the no water light lights up
continuously.
Note: If you want to stop the manual rinsing cycle, press the HOT
WATER/MILK CLEAN button; to restart press the HOT WATER/MILK
CLEAN button again.
11
English

8Fill the water tank with fresh water up to the MAX indication
The machine is ready for use.
Note: The automatic rinsing cycle starts when the machine has been in
stand-by mode, or switched off , for more than 30 minutes. When you
have not used the machine for 2 or more weeks, you will need to perform
a manual rinse cycle.
Measuring the water hardness
To be able to adjust the machine settings to the water in your region, please
measure the water hardness with the water hardness strip supplied.
1Immerse the water hardness test strip (supplied with the machine) in
fresh water for 1 second.
2Remove the water hardness strip and and wait for 1 minute.
12
34
3Check how many squares have changed into the red color and check the
water hardness in below table.
numbers of red squares value to be set water hardness
1/2 A very soft water/ soft water
3 B hard water
4 C very hard water
Installing the Intenza+ water filter
We advise you to install the Intenza+ water filter as this prevents scale
build-up in your machine. You can buy the Intenza+ water filter separately.
For more details, see chapter ‘Guarantee and support’, section ‘Ordering
maintenance products’.
Note: Replace the INTENZA+ filter after 2 months.
1Remove the small white filter from the water tank and store it in a dry
place.
Note: Please keep the small white filter for future use. You will need it for
the descaling process.
12 English

2Remove the filter from its packaging and immerse it in cold water with the
opening pointing upwards. Press the sides of the filter gently to let out
the air bubbles.
3Turn the knob of the filter to the setting that corresponds to the water
hardness of the area you live in.
a Very soft water/ soft water
b Hard water (default)
c Very hard water
Note: You can test the water hardness with a water hardness test strip.
4Place the filter in the empty water tank. Press it down until it cannot
move any further.
5Fill the water tank with fresh water up to the MAX indication and slide it
into the machine.
6Check if the ESPRESSO, CAPPUCCINO, COFFEE and HOT WATER/MILK
CLEAN buttons light up continuously.
2
1
X
X
Aroma plus
Hot water
Espresso
Memo Memo
Calc
clean
Coffee
Milk clean
Memo
Cappuccino
7Insert the hot water dispensing spout and press the HOT WATER/MILK
CLEAN button once. The HOT WATER/MILK CLEAN button flashes.
-Let the machine dispense hot water until the water tank is empty.
-The no water light lights up continuously.
8Refill the water tank with fresh water up to the MAX level and place it
back into the machine.
13
English

2
1
X
X
Aroma plus
Hot water
Espresso
Memo Memo
Calc
clean
Coffee
Milk clean
Memo
Cappuccino
-The ESPRESSO, CAPPUCCINO, COFFEE and HOT WATER/MILK
CLEAN buttons light up continuously.
The machine is ready for use.
Using the machine
Beverage types and lengths
Beverage name Description
Espresso Coffee with thick crema served in a small cup
Cappuccino 1/3 espresso, 1/3 hot milk and 1/3 milk foam served in a large cup
Coffee Regular cup of coffee for a larger cup
Milk froth Hot milk with foam
Beverage name Standard length Length range
Espresso 40 ml 20 - 230 ml
Coffee 120 ml 20 - 230 ml
Note: The lengths stated above are approximate values.
Adjusting the coffee dispensing spout
The machine can be used to dispense different coffee types in cups or
glasses of different sizes. To adjust the height of the coffee dispensing spout
to the size of the cup or glass, slide the spout up or down.
Brewing coffee
Brewing 1 cup of espresso and coffee
1Place a cup under the coffee dispensing spout.
2Press the ESPRESSO or COFFEE button once to brew the selected
coffee.
-The button of the selected beverage flashes slowly.
14 English

3The machine stops brewing when the preset level is reached.
Note: If you want to stop the brewing process before the machine has
finished dispensing the preset coffee volume, press the previously
selected beverage button.
Brewing 2 cups of espresso and coffee
1Place two cups under the coffee dispensing spout.
2Press the ESPRESSO or COFFEE button twice to brew the selected
coffee.
-The button of the selected beverage flashes twice quickly.
The machine grinds and doses automatically the correct amount of
coffee. Brewing two cups of a beverage requires two grinding and
brewing cycles the machine carries out automatically.
3The machine stops brewing when the preset level is reached.
Note: If you want to stop the brewing process before the machine has
finished dispensing the preset coffee volume, press the previously
selected beverage button.
How to place and remove the automatic milk frother
Note: Do not force the automatic milk frother while inserting it.
1
21
1If the hot water dispensing spout is installed, press the release buttons on
both sides of the hot water dispensing spout (1) and remove it (2).
2Slightly tilt the automatic milk frother and insert it all the way into the
guides of the machine.
3Push the automatic milk frother downwards while turning it until it locks
into the machine.
15
English

1
21
4To remove the automatic milk frother, press the release buttons on both
sides of the automatic milk frother, lift it slightly and pull to remove it.
Brewing cappuccino
Warning: Danger of scalding! Dispensing may be preceded by
small jets of hot water. Wait until the end of the brewing cycle
with removing the automatic milk frother.
Caution: Steam and hot milk may spray out of the milk froth dispensing
spout at the start of the brewing cycle.
Note: Use cold milk (at a temperature of approximately 5°C/41°F) with a
protein content of at least 3% to ensure an optimal frothing result. You can
use whole milk or semi-skimmed milk. It is also possible to use skimmed
milk, soy milk and lactose free milk.
1Place a large cup under both the automatic milk frother and the coffee
dispensing spout.
2Remove the lid of the milk carafe and pour the milk in the milk carafe.
Close the lid of the milk carafe.
3Insert the other end of the suction tube into the milk carafe till the bottom
of the milk container.
Cappuccino
Memo
4Press the CAPPUCCINO button.
-The machine dispenses first the milk and then coffee.
5Remove the milk tube connector from the automatic milk frother.
6Plug the milk connector to the pin on the milk container lid and put the
milk container in the fridge.
Note: After brewing a milk-based beverage perform a quick clean of the
milk circuit. Dispense hot water for 5 seconds, see chapter 'Maintenance
and care', section 'Quick clean of the milk system'.
Frothing milk
1Place a large cup under the automatic milk frother.
2Remove the lid of the milk carafe and pour the milk in the milk carafe.
Close the lid of the milk carafe.
3Insert the other end of the suction tube into the milk carafe till the bottom
of the milk carafe.
4Press the HOT WATER/MILK CLEAN button twice.
16 English

-The HOT WATER/MILK CLEAN button flashes twice.
5Press the HOT WATER/MILK CLEAN button once to stop frothing.
Note: after dispensing a milk based beverage perform a quick clean of
the milk circuit. dispense hot water for about 5 seconds, see chapter
'Maintenance and care', section 'Daily cleaning of the automatic milk
frother'.
Hot water
Inserting and removing the hot water dispensing spout
To insert the hot water dispensing spout:
1Tilt the hot water dispensing spout slightly and insert it into the machine.
2Press and turn the hot water dispensing spout downwards to lock it in the
machine.
To remove the hot water spout:
1
21
1Press the release buttons on the sides of the hot water dispensing spout
to unlock it.
2Lift the hot water dispensing spout slightly and pull it out of the machine.
Dispensing hot water
Caution: Steam and hot water may spray out of the hot water dispensing
spout when brewing starts. Wait until the cycle has ended before
removing the hot water dispensing spout.
1Place a cup under the hot water dispensing spout.
2Press the HOT WATER/MILK CLEAN button once.
-The HOT WATER/MILK CLEAN button flashes slowly.
-Hot water dispensing starts automatically.
3Press the HOT WATER/MILK CLEAN button once to stop hot water
dispensing.
Adjusting quantity and taste
Saeco Adapting System
Coffee is a natural product and its characteristics may vary according to
origin, blend and roasting. The machine is equipped with a self-adjustment
system that allows it to get the best taste out of your favorite coffee beans.
It regulates itself after brewing some coffees.
17
English

Activating the aroma plus function
Aroma plus
To get a stronger coffee, press the aroma plus button. The aroma plus
button is backlighted when the aroma plus function is active.
Adjusting coffee length with the MEMO function
You can adjust the quantity of beverage brewed according to your taste and
to the size of the cups.
1Place a cup under the coffee dispensing spout.
2To adjust the length of espresso, press and hold the ESPRESSO button
until the ESPRESSO button flashes quickly. Release the ESPRESSO
button, the machine is in the programming mode.
-The machine brews an espresso.
3Press the ESPRESSO button when the cup contains the desired amount
of espresso.
The ESPRESSO button is programmed: every time it is pressed, the machine
will brew espresso in the amount set. To set the length of coffee follow the
same procedure: press and hold the button of the beverage and press the
same beverage button when the desired amount is in the cup.
Adjusting the cappuccino volume with the MEMO function
You can adjust the cappuccino volume according to your taste and to the
size of the cups. The cappuccino button can be programmed.
1Place a cup under both the automatic milk frother and coffee dispensing
spout.
2To adjust the cappuccino volume, press and hold the CAPPUCCINO
button until the CAPPUCCINO button flashes quickly. Release the
CAPPUCCINO button, the machine is in the programming mode.
3The machine dispenses first the milk. Press the CAPPUCCINO button
when the cup contains the desired amount of milk.
4The machine dispenses the coffee. Press the CAPPUCCINO button
another time when the cup contains the desired amount of coffee.
Adjusting the grinder settings
You can adjust the grinder settings with the grinder adjustment key. At each
setting selected, the ceramic coffee grinder guarantees a perfectly even
grind for every cup of coffee you brew. It preserves the full coffee aroma
and delivers the perfect taste to every cup.
Note: You can only adjust the grinder settings when the machine is grinding
coffee beans.
1Place a cup under the coffee dispensing spout.
18 English

2Open the lid of the bean hopper.
3Press the Espresso button.
2
1
4When the grinder starts grinding, place the grinder adjustment key on the
grinder adjustment knob (1). Push and turn to the left or to the right (2).
-There are 5 different grinder settings you can choose from. The smaller
the dot the stronger the coffee.
Caution: Do not turn the grinder adjustment knob more than one notch at
a time to prevent damage to the grinder.
Maintenance and care
Maintenance of your machine is important to prolong the life of your
machine and to ensure optimum quality and taste of your coffee.
Cleaning the drip tray and the coffee grounds container
-The drip tray is full when the drip tray full indicator pops up through the
drip tray. Empty and clean the drip tray every day.
2
1
1Pull the drip tray out of the machine.
2Remove the coffee grounds container while the machine is switched on.
The counter does not reset if you remove the coffee grounds container
when the machine is switched off.
3Empty and rinse the drip tray under the tap.
4Place the coffee grounds container back in the drip tray.
5Slide the drip tray back into the machine until it locks into position with a
click.
Cleaning the water tank
1Remove the water tank from the machine and rinse it with fresh water
periodically.
2Fill the water tank with fresh water up to the MAX level indication and
place it back in the machine.
Cleaning the coffee compartments
-Clean the bean hopper with a dry cloth once a month.
Cleaning the brew group
Weekly cleaning of the brew group
1Remove the drip tray with the coffee grounds container.
2Empty the drip tray and rinse it under the tap.
3Empty the coffee grounds container and rinse it under a lukewarm tap.
4Switch off the machine and unplug it.
5Open the service door.
6Press the PUSH button (1) and pull at the grip of the brew group to
remove it from the machine (2).
19
English

2
1
7Clean the coffee exit duct thoroughly with the provided tool. Insert it as
indicated in the figure.
8Clean the coffee exit duct thoroughly with a spoon handle. Insert it as
indicated in the figure.
9Remove the coffee residues container, empty it and rinse it under a
lukewarm tap. Let it dry and then reinsert it.
10 Rinse the brew group thoroughly with lukewarm water. Clean the upper
filter carefully.
Caution: Do not clean the brew group in the dishwasher and do not use
washing-up liquid or a cleaning agent to clean it. This may cause the brew
group to malfunction and may have a negative effect on the coffee taste.
11 Let the brew group air-dry thoroughly.
Note: Do not dry the brew group with a cloth to prevent fibers from
collecting inside the brew group.
12 Clean the inside of the machine with a soft damp cloth.
20 English