Philips Saeco INCANTO HD8919 User manual

INCANTO
HD8919
EN USER MANUAL
DE BENUTZERHANDBUCH
ES MANUAL DEL USUARIO
FR MODE D’EMPLOI
IT MANUALE UTENTE
NL GEBRUIKSAANWIJZING
4219.460.3600.1 HD8919 SAECO_INCANTO OTC EXTRA_WE_COVER_A5_FC.indd 1 01-09-16 15:22

ESPRESSO CAPPUCCINO
ESPRESSO LUNGO LATTE MACCHIATO
AROMA STRENGTH MENU
10
9
2
1
3
4
8
7
6
12
13
11
5
27
25
30
31
28 26
29 24
20
22
21
34
37
36
33
32
35
19
1415
18
16
17
40
41
38
39

Machine overview
1User interface 22 Cover of bean hopper
2 ESPRESSO button 23 Bean hopper
3 ESPRESSO LUNGO button 24 Brew group
4 AROMA STRENGTH button 25 Inside of service door with cleaning instructions
5 Standby button 26 Coffee exit duct
6 MENU button 27 Coffee residues drawer
7 LATTE MACCHIATO button 28 Coffee grounds container
8 CAPPUCCINO button 29 Drip tray cover
9 Protection cover 30 Hot water dispensing spout
10 Adjustable coffee dispensing spout 31 Opening for hot water dispensing spout
11 Lid of water tank 32 Water tank
12 Lid of bean hopper 33 Milk container
13 Lid of pre-ground coffee compartment 34 Milk dispensing unit
14 Main switch 35 Lid of milk dispensing unit
15 Socket for cord 36 Milk dispensing spout
16 Service door 37 AquaClean filter
17 'Drip tray full' indicator 38 Water hardness test strip
18 Drip tray 39 Grease tube with application tip
19 Drip tray release button 40 Cleaning brush
20 Cord 41 Measuring scoop
21 Grind setting knob
Introduction
Congratulations on your purchase of a Saeco full-automatic coffee
machine! To fully benefit from the support that Saeco offers, please register
your product at www.saeco.com/care.
To help you get the best out of your coffee machine, Saeco offers full
support in 4 different ways:
-The separate quick start guide for first installation and first use.
-This user manual for more detailed information on how to use the
machine, how to keep it clean, how to descale it and how to solve
problems.
5
English

-This is the QR code. Scan this code to access instruction videos on how
to brew the best coffees, how to clean the machine and for a list of
frequently asked questions. (www.saeco.com/care)
-The separate booklet with important safety information.
First installation
For first installation, follow the instructions on the separate quick start guide.
Note: This machine has been tested with coffee. Although it has been
carefully cleaned, there may be some coffee residues left. We guarantee,
however, that the machine is absolutely new.
Note: You can install the AquaClean filter during the first installation
procedure (see separate quick start guide). If you skip installation of the
AquaClean filter at first use, you can install it later by entering the menu (see
'Activating the AquaClean filter').
AquaClean filter
The AquaClean filter is designed to reduce limescale deposits in your coffee
machine and provide filtered water to preserve the aroma and flavor of each
cup of coffee. If you use a series of 8 AquaClean filters as indicated in this
user manual, you don't have to descale your machine for 5000 cups.
Note: Your machine has to be completely limescale-free before you start to
use the AquaClean filter. If you did not activate the filter during first
installation, you need to descale the machine before you activate the filter.
Activating the AquaClean filter
Note: Always confirm activation of the AquaClean filter in the machine menu
as described below. You also need to do this after replacing the AquaClean
filter. By activating the AquaClean filter in the machine menu, the machine
monitors the number of filters used. When the filter has been replaced 8
times, the machine reminds you to descale it.
1For instructions on how to place the AquaClean filter in the water tank,
see the separate quick start guide.
Note: Shake the AquaClean filter for about 5 seconds, immerse it upside
down in a jug with cold water and wait until no more air bubbles come
out.
6English

2Press the MENU button, select MENU and press the OK button to
confirm. Scroll to AQUACLEAN FILTER. Press the OK button to confirm.
0 / 8
80%
NEW?
-The display shows the number of AquaClean filters that have been
installed previously from 0 to 8 filters.
0 / 8
ON
OFF
3Select ON on the display, press the OK button to confirm.
FILTER
1 / 8
AQUA CLEAN
4The display automatically updates the number of filters used.
-Then the 'machine ready' screen appears with the AquaClean 100%
icon to indicate that the filter has been installed.
5Dispense 2 cups of hot water (0.5 l) to complete the activation. Discard
this water.
Replacing the AquaClean filter
Note: Replace the AquaClean filter as soon as the capacity has dropped to
0% and the filter icon flashes quickly. Replace the AquaClean filter at least
every 3 months, even if the machine has has not yet indicated that
replacement is required.
Tip: We advise you to buy a new filter when the capacity has dropped to
10% and the filter icon starts flashing slowly. This ensures that you can
replace the filter when the capacity has dropped to 0%.
1Take out the AquaClean filter and replace it by a new AquaClean filter
(also see the separate quick start guide).
FILTER
1 / 8
AQUA CLEAN
2Press the MENU button, scroll to AQUACLEAN FILTER and press the OK
button to confirm.
FILTER
0%
NEW?
AQUA CLEAN
-The display asks if you want to activate a new filter.
3Press the OK button to confirm.
7
English

FILTER
2 / 8
AQUA CLEAN
-The display automatically updates the number of filters used.
4Dispense 2 cups of hot water (0.5 l) to complete the activation. Discard
this water.
Replacing the AquaClean filter after 8 filters were used
1When the filter icon starts flashing on the display, press the MENU
button, scroll to AQUACLEAN FILTER and press the OK button to confirm.
DESCALE BEFORE
ACTIVATING FILTER
-The display tells you that you need to descale the machine before
activating the new filter.
2Press the OK button to start the descaling procedure (see 'Descaling
procedure').
-Press the escape button several times to leave the filter menu if you
do not want to descale right away.
3At the end of the descaling procedure, the display asks you if you want
to install the AquaClean filter.
-Follow the steps in 'Replacing the AquaClean filter'.
Measuring the water hardness
Note: If you have installed the AquaClean filter, you do not need to set the
water hardness.
To be able to adjust the machine settings to the water in your region, please
measure the water hardness with the water hardness test strip supplied. The
default water hardness of the machine is set to the highest level (4). If the
measured water hardness is different, adjust the setting in the machine
menu.
1Immerse the water hardness test strip (supplied with the machine) in tap
water for 1 second.
2Remove the water hardness test strip and and wait for 1 minute.
3Check how many squares have turned red and check the water hardness
in the table below.
number of red squares value to be set water hardness
1 very soft water
2 soft water
3 hard water
4 very hard water
4Press the MENU button, select menu and scroll to select water hardness.
Select the preferred water hardness setting and press the OK button to
confirm.
8English

Control panel and display
This espresso machine has a self-explaining display for easy use. Read the
sections below for a quick explanation of the buttons.
One-touch beverage buttons
Use the one-touch beverage buttons (ESPRESSO, ESPRESSO LUNGO,
CAPPUCCINO and LATTE MACCHIATO) to quickly prepare one of the preset
beverages.
-Make sure that the milk carafe is in place and prepared for use when you
select cappuccino or latte macchiato (see the separate quick start guide).
-If you want to stop the brewing process before the machine has finished
dispensing the preset coffee volume, press the OK button.
-You can adjust the length of espresso or espresso lungo (see 'Adjusting
coffee and milk volume').
-After preparing a milk-based beverage, the machine starts the QUICK
CARAFE CLEAN procedure.
Navigation buttons
Some of the one-touch beverage buttons have a double function; use these
buttons to navigate through the menu:
ESPRESSO
ESPRESSO button = Escape
button: press this button to return
to the main menu.
CAPPUCCINO
CAPPUCCINO button = Up button:
press this button to scroll up
through the display menu.
AROMA STRENGTH
AROMA STRENGTH button = OK
button: press this button to select,
confirm or stop a function.
MENU
MENU button = Down button:
press this button to scroll down
through the display menu.
MENU button
Use the MENU button to prepare other drinks, like hot water and frothed
milk. You can also use the MENU button to change the following settings:
-Display contrast
-Coffee temperature
-Stand-by time: this is the time after which the machine goes into standby
mode.
-Water hardness: to be able to adjust the machine settings to the water in
your region, please measure the water hardness.
-To activate the AquaClean filter
-To start descaling
AROMA STRENGTH button
Use the AROMA STRENGTH button to adjust the coffee strength (see
'Adjusting coffee strength') or to brew pre-ground coffee.
9
English

Brewing coffee
Brewing coffee with beans
Caution: Only use espresso beans. Never put ground coffee, unroasted
coffee beans or caramelized coffee beans in the bean hopper, as this may
cause damage to the machine.
To brew coffee, follow the instructions on the separate quick start guide.
To brew two cups of espresso or espresso lungo, press the button of the
desired beverage twice. The machine automatically carries out two grinding
cycles in sequence.
Note: Using the cover of the bean hopper helps to keep the beans fresh.
Brewing coffee with pre-ground coffee
When you brew coffee with pre-ground coffee, use the measuring scoop
supplied to put the correct dose in the pre-ground coffee compartment. Do
not add too much pre-ground coffee to avoid the coffee grounds drawer
from getting clogged.
1Open the lid of the pre-ground coffee compartment.
2Pour one measuring scoop of pre-ground coffee into the pre-ground
coffee compartment and close the lid.
Caution: Do not put any other substance than pre-ground coffee in the
pre-ground coffee compartment, as this may damage the machine.
3Place a cup under the coffee dispensing spout.
4Press the AROMA STRENGTH button and select the pre-ground coffee
brewing function.
5Press the ESPRESSO button.
The machine automatically starts brewing the selected beverage.
Note: With pre-ground coffee you can only brew one coffee at a time.
Special drinks and hot water
How to select special drinks
1Press the MENU button and select DRINKS.
2Press the OK button to confirm.
3Scroll through the menu and select the desired beverage.
10 English

Dispensing hot water
Caution: Steam and hot water may spray out of the hot water dispensing
spout when brewing starts. Wait until brewing has ended before you
remove the hot water dispensing spout.
1Insert the hot water dispensing spout.
2Press the MENU button. Select DRINKS, confirm and scroll to select HOT
WATER.
Caution: Only select HOT WATER in the menu when the hot water
dispensing spout is installed.
3Press the OK button to confirm. The display reminds you to install the hot
water dispensing spout; press the OK button to confirm. The machine
starts dispensing hot water.
4To stop dispensing hot water, press the OK button.
Brewing milk-based coffee beverages and milk froth
Note: For more information on how to use the milk carafe, read the separate
quick start guide or scan the QR code (see 'Introduction ') to access the
dedicated website for instruction videos.
Caution: Make sure that the milk carafe is installed and the milk
froth dispensing spout is open before you select a milk-based
coffee beverage or milk froth. If the milk carafe is not installed
correctly, steam and hot milk may spray out of the milk froth
dispensing spout.
1Place a cup under the open milk froth dispensing spout.
2Choose your milk-based beverage.
-Press the one-touch CAPPUCCINO or LATTE MACCHIATO button to
brew one of these milk-based beverages right away.
-Press the MENU button, choose DRINKS and scroll down through the
drinks to select MILK FROTH.
-The machine reminds you that you have to install the milk carafe and
open the milk froth dispensing spout.
3The machine first dispenses a preset volume of frothed milk into the cup
or glass and then dispenses a preset volume of coffee.
-To stop dispensing milk or coffee, press the OK button.
4After brewing milk-based coffee beverages, the display asks you if you
want to perform the quick clean procedure for the milk carafe. You have
10 seconds to activate the quick clean procedure (see 'Carafe quick
clean'). You can perform the quick clean procedure while leaving the milk
inside the milk carafe. It is recommended to perform the quick clean
procedure at least once a day. Press the OK button to confirm that you
want to perform the quick clean procedure or press the escape button to
perform the quick clean procedure later.
11
English

Beverage types and lengths
Beverage types
Beverage name Description How to select
Espresso Coffee with thick crema served in a
small cup
One-touch beverage button on
control panel
Espresso Lungo A longer espresso with thick crema
served in a medium-sized cup
One-touch beverage button on
control panel
Cappuccino 1/3 espresso, 1/3 hot milk and 1/3
milk foam served in a large cup
One-touch beverage button on
control panel
Latte Macchiato Long shot of hot milk with foam and
a shot of espresso served in a tall
glass
One-touch beverage button on
control panel
Milk Froth Hot milk with foam MENU/DRINKS
Hot Water MENU/DRINKS
Beverage lengths
Beverage name Standard length Length range
Espresso 40 ml 20 - 230 ml
Espresso Lungo 80 ml 20 - 230 ml
Hot water 300 ml 50 - 450 ml
Adjusting volume and taste
Adjusting coffee and milk volume
You can adjust the volume of the beverage brewed according to your taste
and to the size of the cups.
Caution: Do not use cups that have a diameter of more than 8cm, to avoid
damage to the front panel.
Note: We advise you to use glass cups or cups with a ceramic-coated rim.
1To adjust the espresso volume, press and hold the ESPRESSO button
until the display shows the MEMO icon.
-The machine enters the programming phase and starts to brew the
selected beverage.
2Press the OK button when the cup contains the desired amount of
espresso.
-The tick on the display shows that the button is programmed: every
time it is pressed, the machine brews the set espresso volume.
12 English