Philips AJ5300D/37 User manual

Register your product and get support at
www.philips.com/welcome
AJ5300D
EN User manual

a
b
c
h
g
i
d
l
k
j
e
f
A

B

SOURCE
C

D

VOLUME
E

1 Important
Safety
Important Safety Instructions
a Read these instructions.
b Keep these instructions.
c Heed all warnings.
d Follow all instructions.
e Do not use this apparatus near water.
f Clean only with dry cloth.
g Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
h Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including ampliers) that
produce heat.
i Protect the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
j Only use attachments/accessories specied by
the manufacturer.
k Use only with the cart, stand, tripod, bracket, or
table specied by the manufacturer or sold with
the apparatus.When a cart is used, use caution

when moving the cart/apparatus combination to avoid injury
from tip-over.
l Unplug this apparatus during lightning storms or when unused
for long periods of time.
m Refer all servicing to qualied service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
n Apparatus shall not be exposed to dripping or splashing.
o Do not place any sources of danger on the apparatus (e.g. liquid
lled objects, lighted candles).
p This product may contain lead and mercury. Disposal of
these materials may be regulated due to environmental
considerations. For disposal or recycling information, please
contact your local authorities or the Electronic Industries
Alliance: www.eiae.org.
q Where the plug of the Direct Plug-in Adapter is used as the
disconnect device, the disconnect device shall remain readily
operable.

Warning
•Never remove the casing of this clock radio.
•Never place this clock radio on other electrical equipment.
•Keep this clock radio away from direct sunlight, naked ames
or heat.
•To reduce the risk of re or electric shock, do not expose this
apparatus to rain or moisture.
•Ensure that you always have easy access to the power cord,
plug or adapter to disconnect this clock radio from the power.
2 Your Docking Entertainment
System
Congratulations on your purchase, and welcome to Philips! To fully
benet from the support that Philips offers, register your product at
www.philips.com/welcome.
If you contact Philips, you will be asked for the model and serial number
of this apparatus.The model number and serial number are on the
bottom of the apparatus.Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Introduction
With this clock radio, you can
• listen to FM radio;
• enjoy audio from iPod/iPhone or an external device;
• set alarms to ring at different time;
• choose buzzer, radio, or audio in iPod/iPhone as your alarm source;
• experience various features brought by HomeStudio app.

What’s in the box
Check and identify the contents of your package:
• Main unit
• DC adaptor
• User manual
Overview of the main unit
a AL1/AL2
• Set alarm.
• View alarm settings.
• Activate/deactivate alarm timer.
b SOURCE
• Select source.
c • Turn on/off the clock radio.
d DOCK
• Dock for iPod/iPhone.
e - VOLUME +
• Adjust volume.
f SNOOZE/BRIGHTNESS
• Snooze alarm.
• Adjust display brightness.
g TIME SET
• Set the time.
h TUNING
• Tune or scan to an FM radio station.

i DC IN
• Power supply socket.
j FM ANTENNA
• Improve FM reception.
k MP3-LINK
• Connect an external audio device.
l SLEEP
• Set sleep timer.
3 Get started
Caution
•Use of controls or adjustments or performance of procedures other
than herein may result in hazardous radiation exposure or other unsafe
operation.
Always follow the instructions in this chapter in sequence.
Connect power
Caution
•Risk of product damage! Make sure that the power voltage corresponds
to the voltage printed on the back or underside of the unit.
•Risk of electric shock! When you unplug the power adapter, always pull
the plug from the socket. Never pull the cord.
•Before connecting the power adapter, make sure that you have
completed all other connections.
•Use the supplied power adapter only.

Turn on
Press .
» The clock radio switches to the last selected source.
Switch to standby mode
Press to switch the clock radio to standby mode.
» The clock (if set) is displayed.
Set time and date
1 In standby mode, press and hold TIME SET on the back of your
clock radio for more than two seconds.
» [12H] or [24H] begins to blink.
2 Press / repeatedly to select 12/24 hour format.
3 Press TIME SET to conrm.
» The hour digits begin to blink.
4 Repeat steps 2-3 to set hour and minute.
Note
•If clock is not manually set, when iPod/iPhone is connected, the unit
synchronizes time from the iPod/iPhone automatically.
Tip
•The accuracy of the transmitted time depends on the docked iPod/
iPhone that transmits the time signal.

4 Play
Play from iPod/iPhone
You can enjoy audio from iPod/iPhone through this clock radio.
Compatible iPod/iPhone
The unit supports the following iPod, iPhone models:
Made for.
• iPod classic
• iPod touch (1st, 2nd, 3rd, and 4th generation)
• iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th generation)
• iPhone 4S
• iPhone 4
• iPhone 3GS
• iPhone 3G
• iPhone
Install HomeStudio App
Philips HomeStudio app brings a suite of new features to your clock
radio, including FM radio programming and a multi-function alarm
clock.To enjoy more features, you are recommended to install this free
HomeStudio app.
Note
•Make sure that your iPod/iPhone is connected to the Internet.

1 Press SOURCE repeatedly to select DOCK mode.
2 Insert your iPod/iPhone into the dock.
3 For the rst-time use, you will be asked to install the HomeStudio
app on your iPod/iPhone.
4 Tap [Yes] (yes) to accept the installation request.
5 Follow the on-screen instructions to complete the installation.
Philips HomeStudio app only can be installed in the following iPod,
iPhone models:
• iPod touch (1st, 2nd, 3rd, and 4th generation)
• iPhone 4S
• iPhone 4
• iPhone 3GS
• iPhone 3G
• iPhone
Play music in the iPod/iPhone
Note
•Make sure that you have installed the HomeStudio app on your iPod/
iPhone.
1 Tap HomeStudio icon on your iPod/iPhone.
» The clock/alarm setting screen appears.
2 Slide left to display the following screen.
3 Select a track from the playlist, and then press .
» Music streams from your iPod/iPhone to the clock radio.

Use more features with “HomeStudio App”
Note
•Make sure that your iPod/iPhone is inserted into the clock radio.
Set clock, alarm, and sleep timer:
1 Launch the HomeStudio app.
2 On the screen below, tap the setting icon .
» You can set clock, sleep timer, and alarm for your clock radio.
Note
•The alarms set with your clock radio will appear under [Dock Alarm]
(dock alarm) category.
•You can also set more alarms by tapping on the top right of the alarm
setting screen.
Store FM radio stations manually:
1 Slide right to display the screen as below.
2 Press to tune to a radio station.
3 Press [SAVE] (save), and then press a preset number.
» [SAVE] (save) and the selected number turns blue.
» The radio station is saved successfully.
4 If [SAVE] (save) is activated, you can tune to other stations, and press
a number to save stations directly.