Philips DC290/05 User manual

1
Quick start guide
EN
What’s in the box
2
Connect
Setup
Enjoy
3
© Royal Philips Electronics N.V. 2010
All rights reserved.
Specications are subject to change without notice.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
DC290_05_QSG_V1.2
Quick Start Guide
User Manual
User Manual
Quick Start Guide
Register your product and get support at
www.philips.com/welcome DC290
Docking Entertainment System
Remote control
1Connect
Connect power
A
1Connect the AC power cord to the wall
outlet.
MP3 link cableMain unit
RE P A L M
SLEE P
SET TIME
MENU
VO L
DSC
DBB
POWER
OK
TUNER
MP 3 LI N K
MUT E
BRIGHTNE S S
PROG
ALM 1ALM 2
DC290_05_QSG_V1.2_EN.indd 2-4 8/6/2010 3:52:04 PM

Setup
2
1In standby mode, press and hold SET
TIME/PROG for 2 seconds.
[24 HR] begins to blink.»
2Press OK/ to select the 12/24 hour
format.
3Press SET TIME/PROG to conrm.
The hour digits begin to blink.»
4Press / to set the hour.
5Press SET TIME/PROG to conrm.
The minute digits begin to blink.»
6Repeat steps 4-5 to set the minute,
year, month, and day.
Set time and date
A
1In the tuner mode, press and hold
SET TIME/PROG for more than
2 seconds to activate automatic
program mode.
[AUTO] (auto) is displayed.»
All available stations are»
programmed in the order of
waveband reception strength.
The rst programmed »
radio station is broadcast
automatically.
2Press / to select a preset
number.
E Tip
Detailed functions and features are•
described in the user manual.
Program and listen to
radio stations
APlay from iPod/iPhone B
Setup
2
Set the alarm timer
B
Activate and deactivate the alarm timer
1Press ALM 1 or ALM 2 repeatedly to
activate or deactivate the timer.
If the timer is activated, [»AL 1]
or [ AL2] is displayed.
If the timer is deactivated, [»AL1]
or [ AL2] disappears.
Repeat alarm
1When the alarm rings, press
BRIGHTNESS/REP ALM.
The alarm repeats ringing minutes»
later.
E Tip
You can press
»/ to adjust the interval to
repeat alarm.
Stop alarm ring
1When the alarm rings, press the
corresponding ALM 1 or ALM 2.
The alarm stops but the alarm»
settings remain.
1Lift up the iPhone/iPod dock on the
top panel.
2Place the iPhone/iPod into the dock.
Enjoy
2
3
You can set two alarms which go off at
different time.
1Ensure that you have set the clock
correctly.
2Press and hold ALM 1 or ALM 2 for
2 seconds.
[AL 1] or [AL 2] begin to blink.»
3Press SOURCE on the top panel to
select an alarm sound source: iPod/
iPhone, FM tuner, or buzzer.
4Press ALM 1 or ALM 2.
The hour digits begin to blink.»
5Press /repeatedly to set the hour.
6Press ALM 1 or ALM 2 to conrm.
The minute digits begin to blink.»
7Repeat steps 5-6 to set the minute.
8Repeat steps 5-6 to select whether
to ring alarm the whole week, on
weekdays, or at weekend.
9Repeat steps 5-6 to set the alarm volume.
E Tip
If you set iPhone/iPod playlist as the sound•
source, you must create a playlist in iTunes
called “PHILIPS” and import it to your
iPhone/iPod.
If no playlist is created in the iPod/iPhone•
or there is no song in the playlist, the unit
will wake to songs in the iPod/iPhone.
Enjoy
2
3
3Press iPhone/iPod to select iPod/
iPhone source.
The connected iPod/iPhone»
plays automatically.
To pause/resume play,•
press OK/.
To skip to a track,•
press / .
To search during play,•
press and hold / ,
then release to resume
normal play.
To go back to the previous•
iPod/iPhone menu, press
MENU. To scroll through
the menu, press / .
To conrm a selection, •
press OK/.
If no key is pressed for»
more than 10 seconds,
OK/acts back as the
play/pause key.
DC290_05_QSG_V1.2_EN.indd 5-7 8/6/2010 3:52:06 PM