Philips DCB146/05 User manual

Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
DCB146
1
Quick Start Guide
2
User Manual
Quick Start Guide User Manual
3
1
2
Remote Control
4 iPod Adaptors
DCB146_QSG_Eng 3/30/10, 12:411

1
2
Connection
Connect the speaker wires to the SPEAKERS terminals.
Connect the power cord of the system to the AC power outlet.
Tip:
It is unnecessary to connect the DAB/ FM antenna since it
is fixed to the main unit.
speaker
(right)
speaker
(left)
DAB/FM wire antenna
AC power cord
2
1
DCB146_QSG_Eng 3/30/10, 12:412

5
1
2
3
4
Setting the clock
In standby mode, press and hold
DISPLAY/CLOCK on the remote control
set for 2 seconds.
6
7
1
2
3
4
5
Playing a disc
Select CD source.
Lift the CD door on the top of the system to open the CD compartment.
Insert a disc with the printed side facing up and press down
on PULL TO OPEN to close the CD door.
PressÉÅto start playback.
Press 9to stop playback.
Press PROG to select 12-hour or 24-hour display.
Press DISPLAY/CLOCK to confirm.
➜The clock digits for the hours flash.
Press TUNING 4 ¢ (or 4 ¢ on the remote
control) to set the hours.
Press DISPLAY/CLOCK again.
➜The clock digits for the minutes flash.
Press TUNING 4 ¢ (or 4 ¢ on the remote control) to set
the minutes.
Press DISPLAY/CLOCK to confirm the time.
DCB146_QSG_Eng 3/30/10, 12:413

1
2
Press SOURCE (or DAB on the remote control)
to select DAB to start an automatic search of available DAB
stations.
Press 4 / ¢to change the DAB stations.
Tuning to DAB stations
5
Programming and tuning to FM
stations
Select FM TUNER source.
1
2Press SCAN for more than two seconds to program all
available stations (FM only).
Press PRESET +/- ( or 3/4on the remote control ) until the
desired preset station is displayed.
3
To access setup options, press MENU then use the navigation
control buttons to select.
3Press OK to confirm a selection.
4To perform a local scan (in UK ), press briefly SCAN.
To perform a full scan (outside UK ), press and hold SCAN.
DCB146_QSG_Eng 3/30/10, 12:414

© Royal Philips Electronics N.V. 2010
All rights reserved.
http://www.philips.com DCB146_05_QSG_V2.0
Tip:
Detailed playback features and
additional functions are described in
the accompanied user manual.
Notes for the remote control:
– First, select the source you wish to
control by pressing one of the source select
keys on the remote control (DISC or AUX,
for example).
–Then select the desired function ( 2;,
4, ¢for example).
1
2
Press PUSH TO OPEN to open the dock.
Select the dock adaptor of the correct type and size, and snap it into the
dock.
➜Each iPod adaptor has its indication to fit a specific iPod.
Correctly place your iPod in the dock.
Playing iPod using the dock
3
4
MIC
PUSH TO OPEN
DOCK FOR iPOD
RO SYSTEM DCB146
SOURCE
DOCK
STANDBY-ON
CD/CD-R/CD -RW COMPATIBLE
PRESET
iR
VOL
VOL
TUNING
Press SOURCE repeatedly or DOCK on the set (or iPOD
on the remote control) to select iPod source.
➜The connected player will play automatically.
➜The iPod battery will be charged in either normal standby mode or power-on mode.
DCB146_QSG_Eng 3/30/10, 12:415