Philips Fidelio AS351 User manual

AS351
User manual
Register your product and get support at
www.philips.com/welcome

1EN
Contents
1 Important 2
Safety 2
2 Your Docking Speaker for
Android™ 3
Introduction 3
What's in the box 3
Overview of the main unit 4
3 Get started 5
Power supply 5
Option 1: AC power 5
Option 2: Battery power 5
Turn on 5
Switch to standby mode 5
4 Play and charge 6
Compatible with Android™ 6
Play audio through manual Bluetooth
connection 6
Play audio through auto Bluetooth
connection with Philips DockStudio 7
Install DockStudio app onto
Android-powered device 8
Activate Bluetooth with
DockStudio app 10
Dock and charge Android-powered
phone 13
Dock Android-powered device 13
Use dock extension 13
Charge Android-powered phone 14
Play audio with Philips Songbird 14
Install Songbird on Android-
powered device 14
Install Songbird on PC 16
Sync with PC through Philips
Songbird 16
5 Other features 17
Use more features with DockStudio 17
Listen to Internet radio 17
Set sleep timer 17
Set alarm timer 18
Charge your phone through the USB
socket 19
Play audio from an external device 19
6 Product information 21
Specications 21
7 Troubleshooting 22
8 Notice 23
Recycling 23

2EN
1 Important
Safety
• Onlyuseattachments/accessoriesspecied
by the manufacturer.
• Apparatus shall not be exposed to
dripping or splashing.
• Do not place any sources of danger on the
apparatus(e.g.liquidlledobjects,lighted
candles).
• Where the MAINS plug or an appliance
couplerisusedasthedisconnectdevice,
the disconnect device shall remain readily
operable.
• Use only power supplies listed in the user
manual.
Warning
•Never remove the casing of this apparatus.
•Never lubricate any part of this apparatus.
•Never place this apparatus on other electrical
equipment.
•Keepthisapparatusawayfromdirectsunlight,naked
amesorheat.
•Ensure that you always have easy access to the power
cord,plugoradaptortodisconnecttheapparatusfrom
the power.
Caution
•Batteries (battery pack or batteries installed) shall not
beexposedtoexcessiveheatsuchassunshine,reor
the like.
•Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.

3EN
2 Your Docking
Speaker for
Android™
Congratulationsonyourpurchase,and
welcometoPhilips!Tofullybenetfromthe
supportthatPhilipsoffers,registeryourproduct
at www.philips.com/welcome.
Introduction
Withthisdockingspeaker,youcan:
• enjoyaudiofromyourBluetooth-enabled
portable device or an external device;
• charge your phone; and
• experience various features brought by
Philips Philips DockStudio and Philips
Songbird app.
What's in the box
Check and identify the contents of your
package:
• Main unit
• Power adapter
• Dock extension
• Quick start guide
• Safety sheet

4EN
Overview of the main unit
a
• Activate or deactivate Bluetooth
function.
b
• Bluetooth indicator.
c
• Charge your phone through USB cable.
d AUX IN
• Connect an external audio device.
e Dock for Android-powered device
e
f
g
h
d
a
b
c
f +/-
• Adjustvolume.
g Power supply socket
h Battery compartment

5EN
3 Get started
Always follow the instructions in this chapter in
sequence.
Power supply
Either AC power or batteries can be used as
power supply of this speaker.
Option 1:AC power
Caution
•Risk of product damage! Ensure that the power voltage
corresponds to the voltage printed on the back or
underside of the unit.
•Risk of electric shock! When you unplug the AC
adapter,alwayspulltheplugfromthesocket.Never
pull the cord.
Connect the power adapter to the wall outlet.
Option 2: Battery power
Caution
•Riskofexplosion!Keepbatteriesawayfromheat,
sunshine,orre.Neverdiscardbatteriesinre.
1 Open the battery compartment.
2 Insert 4 AA batteries with correct polarity
(+/-) as indicated.
3 Close the battery compartment.
Note
•Batteriescontainchemicalsubstances,sotheyshould
be disposed of properly.
Turn on
Press .
» The Bluetooth indicator begins to
blink.
Switch to standby mode
Press again to switch the docking speaker to
standby mode.
» The Bluetooth indicator turns off.
+
+
+
+
AA
AA
AA
AA

6EN
4 Play and charge
Withthisdockingspeaker,youcanenjoyaudio
in two ways:
• through manual Bluetooth connection;
• through automatic Bluetooth connection
with Philips DockStudio app.
Compatible with Android™
Tomakefulluseofyourdockingspeaker,your
Android-powered device should satisfy the
following requirements:
• With Android operation system (Version
2.1 or above);
• With Bluetooth software (Version 2.1 or
above); and
• With a micro USB connector.
For other devices with micro USB connector
andBluetoothfunction,youcanstillusethe
docking speaker to do the following:
• Charge your device through the USB
connector or USB socket;
• EnjoyaudiothroughBluetooth.
Tip
•Formoredetails,gotowww.philips.com/exidock.
Play audio through manual
Bluetooth connection
The docking speaker uses Bluetooth wireless
technology to stream music from your portable
device to the system.
Note
•Before you connect a Bluetooth device to this docking
speaker,familiarizeyourselfwiththeBluetooth
capabilities of the device.
•Keep this docking speaker away from other electronic
devices that may cause interference.
1 Onyourdockingspeaker,press to
activate Bluetooth.
» The Bluetooth indicator blinks on the
display panel.
2 Turn on Bluetooth function of your
portable device.
• Different devices may have different
way to activate Bluetooth.
3 Scan Bluetooth devices that can pair with
your portable device.

7EN
4 When [PHILIPS AS351] is displayed on
yourdevice,selectittostartconnection.
» Ifconnectionissuccessful,youwillhear
doublebeepconrmationandnda
different Bluetooth icon on the top of
the screen.
5 Play audio with the media player of your
portable device.
» The audio comes out through the
docking speaker.
Tip
•The effective operation range between the docking
speaker and the paired device is approximately 10
meters (30 feet).
•Any obstacle between the speaker and the device can
reduce the operational range.
Play audio through auto
Bluetooth connection with
Philips DockStudio
Philips DockStudio app brings a suite of new
featurestoyourdockingspeaker,including
automaticBluetoothconnection,Songbird
musicplayer,Internetradioandamulti-function
alarmclock.Toenjoymorefeatures,youare
recommended to download and install the free
app.

8EN
Install DockStudio app onto Android-
powered device
You have two ways to install Philips
DockStudio on your Android-powered device.
Install DockStudio app through QR code
Note
•Make sure that your Android-powered device is
connected to the Internet.
•Make sure that your device has a barcode scanner such
as"QRDroid".Ifnot,downloadonefromtheAndroid
market.
1 Use the barcode scanner to scan the QR
code on the package or Quick Start Guide.
2 Follow the on-screen instructions to install
Philips DockStudio app.
3 Wheninstallationiscomplete,tap[Done]
(done).
» The DockStudio icon appears on your
portable device.
The Philips DockStudio app brings a suite of
cool, new features to your Philips DockStudio
docking speaker, including automatic Bluetooth
connection, Songbird music player,
worldwide Internet radio, sound settings
DockStudio

9EN
Install DockStudio app through Android
Market
You can also search Philips DockStudio from
AndroidMarketdirectly,andtheninstalltheapp.
Note
•Make sure that your Android-powered device is
connected to the internet.
•Make sure that Android Market is available on your
Android-powered device.
DockStudio
1 Tap the "Android Market" icon on your
device.
2 Tap the search icon on the screen.
3 Inthesearchbar,typein"Philips
DockStudio" to search the app.
4 Fromthesearchresultlist,ndandtap
Philips DockStudio to start downloading.
5 Follow the on-screen instructions to install
the DockStudio app.