Philips DC350 User manual

DC350/12
EN User manual 3
DA Brugervejledning 26
DE Benutzerhandbuch 49
ES Manual del usuario 73
FR Mode d’emploi 97
IT Manuale utente 121
NL Gebruiksaanwijzing 146
SV Användarhandbok 171
www.philips.com/welcome
Register your product and get support at
DC350_12_Book 1.indd 1DC350_12_Book 1.indd 1 11/7/2008 2:05:05 PM11/7/2008 2:05:05 PM

English
3EN
Contents
1 Important
4
Safety 4
Notice 5
2 Your Docking Entertainment System 6
Introduction 7
What’s in the box 7
Overview of the main unit 7
Overview of the remote control 10
3 Get started 12
Prepare the remote control 12
Connect power 13
Set clock and date 13
Turn on 14
4 Play 14
Play from iPod/iPhone 14
Play from an external device 16
5 Adjust sound 16
Adjust volume level 16
Enhance bass 16
Select a preset sound effect 16
Mute sound 17
6 Listen to radio 17
Tune to a radio station 17
Program radio stations manually 17
Select a preset radio station 18
7 Use Bluetooth devices 18
Connect with a Bluetooth device 18
Receive a phone call 20
Listen to music 20
8 Other features 21
Set the alarm timer 21
Set the sleep timer 22
Adjust display brightness 22
9 Product information 22
Specifications 22
10 Troubleshooting
24
DC350_12_Book 1.indd 3DC350_12_Book 1.indd 3 11/7/2008 2:05:10 PM11/7/2008 2:05:10 PM

4EN
1 Important
Safety
aRead these instructions.
bKeep these instructions.
cHeed all warnings.
dFollow all instructions.
eDo not use this apparatus near water.
fClean only with dry cloth.
gDo not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
hDo not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
iFor countries with a polarized mains, do not defeat the safety
purpose of the polarized or grounding-type plug.A polarized plug
has two blades with one wider than the other.A grounding type plug
has two blades and a third grounding prong.The wide blade or the third prong
are provided for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
Caution:To prevent electric shock, match the wide blade of the plug to the wide
slot, fully insert.
jProtect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
kOnly use attachments/accessories specified by the manufacturer.
lUse only with the cart, stand, tripod, bracket, or table specified by
the manufacturer or sold with the apparatus.When a cart is used,
use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
mUnplug this apparatus during lightning storms or when unused for long periods
of time.
nRefer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
DC350_12_Book 1.indd 4DC350_12_Book 1.indd 4 11/7/2008 2:05:10 PM11/7/2008 2:05:10 PM

English
5EN
oBattery usage CAUTION – To prevent battery leakage which may result in
bodily injury, property damage, or damage to the unit:
Install all batteries correctly, + and - as marked on the unit.
Do not mix batteries (old and new or carbon and alkaline, etc.).
Remove batteries when the unit is not used for a long time.
pApparatus shall not be exposed to dripping or splashing.
qDo not place any sources of danger on the apparatus (e.g. liquid filled objects,
lighted candles).
rThis product may contain lead and mercury. Disposal of these materials may
be regulated due to environmental considerations. For disposal or recycling
information, please contact your local authorities or the Electronic Industries
Alliance: www.eiae.org.
s Where the MAINS plug or an appliance coupler is used as the disconnect
device, the disconnect device shall remain readily operable.
Warning
Never remove the casing of this DC350.
Never lubricate any part of this DC350.
Never place this DC350 on other electrical equipment.
Keep this DC350 away from direct sunlight, naked flames or heat.
Never look into the laser beam inside the DC350.
Ensure that you always have easy access to the power cord, plug or adaptor to disconnect the
DC350 from the power.
•
•
•
•
•
•
Caution
Use of controls or adjustments or performance of procedures other than herein may result in
hazardous radiation exposure or other unsafe operation.
•
Notice
This product complies with the radio interference requirements of the
European Community.
This product complies with the requirements of the following directives and
guidelines: 2004/108/EC + 2006/95/EC
Any changes or modifications made to this device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s authority to operate the equipment.
•
•
•
DC350_12_Book 1.indd 5DC350_12_Book 1.indd 5 11/7/2008 2:05:11 PM11/7/2008 2:05:11 PM

6EN
Recycling
Your product is designed and manufactured with high quality materials and components,
which can be recycled and reused.
When you see the crossed-out wheel bin symbol attached to a product, it
means the product is covered by the European Directive 2002/96/EC:
Never dispose of your product with other household waste. Please inform
yourself about the local rules on the separate collection of electrical and
electronic products.The correct disposal of your old product helps prevent
potentially negative consequences on the environment and human health.
Your product contains batteries covered by the European Directive 2006/66/EC, which
cannot be disposed of with normal household waste.
When you see the crossed-out wheel bin symbol with the chemical symbol
‘Pb’, it means that the batteries comply with the requirement set by the
directive for lead:
Please inform yourself about the local rules on separate collection of
batteries.The correct disposal of batteries helps prevent potentially negative
consequences on the environment and human health.
Environmental information
All unnecessary packaging has been omitted.We have tried to make the packaging
easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and
polyethylene (bags, protective foam sheet.)
Your system consists of materials which can be recycled and reused if disassembled by
a specialized company. Please observe the local regulations regarding the disposal of
packaging materials, exhausted batteries and old equipment.
Windows Media and the Windows logo are trademarks, or registered
trademarks of Microsoft Corporation in the United States and/or other
countries.
Norge
Typeskilt finnes på apparatens underside.
Observer: Nettbryteren er sekundert innkoplet. Den innebygde netdelen er derfor ikke
frakoplet nettet så lenge apparatet er tilsluttet nettkontakten.
For å redusere faren for brann eller elektrisk støt, skal apparatet ikke utsettes for regn
eller fuktighet.
2 Your Docking Entertainment System
Congratulations on your purchase, and welcome to Philips!To fully benefit from the
support that Philips offers, register your product at www.Philips.com/welcome.
Pb
DC350_12_Book 1.indd 6DC350_12_Book 1.indd 6 11/7/2008 2:05:12 PM11/7/2008 2:05:12 PM

English
7EN
Introduction
With this DC350, you can enjoy audio from the iPod, iPhone, other audio devices, or
the radio.
If you own a Bluetooth-enabled device, you can also receive phone calls or listen to
audio from the device.
The radio, iPod, or iPhone can be set as the alarm timer.You can set two alarm timers to
go off at different times.
For the best sound quality, enrich sound from any source with Digital Sound Control
(DSC) and Dynamic Bass Boost.
What’s in the box
Check and identify the contents of your package:
Main unit
Remote control
1 x AC adaptor
1 x MP3 link cable
1 x mini USB cable
Overview of the main unit
•
•
•
•
•
DC350_12_Book 1.indd 7DC350_12_Book 1.indd 7 11/7/2008 2:05:13 PM11/7/2008 2:05:13 PM

8EN
aALM 1
Set the first alarm timer.
View the first alarm time.
Turn off the first alarm tone.
bBluetooth indicator
Indicate Bluetooth connection.
c
Turn on the DC350 or switch to standby mode.
Turn off an alarm tone.
dSLEEP
Set the sleep timer.
ePRESET +/-
Select a preset radio station.
fMUTE
Mute volume.
Mute the built-in microphone during a phone call.
PROG
Program radio stations.
TIME SET
Set the clock.
gPAIRING
Pair the DC350 with a Bluetooth device.
Answer an incoming phone call.
During a phone call: select to hear the audio from the device or from the
DC350.
h/
Skip to the previous/next audio file.
Search within an audio file.
Tune to a radio station.
Adjust time.
iMIC
Built-in microphone for phone calls.
j
Reject an incoming phone call.
End a phone call.
Disconnect a device.
kiPod/iPhone dock
Load an iPod/iPhone.
lVOL +/-
Adjust volume.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
DC350_12_Book 1.indd 8DC350_12_Book 1.indd 8 11/7/2008 2:05:14 PM11/7/2008 2:05:14 PM

English
9EN
m
Start or pause iPod/iPhone play.
nSOURCE
Select a source: iPod/iPhone, Bluetooth, tuner or MP3 link.
oTilt adjustment rod
Move forward/backward to adjust the angle at which the iPod/iPhone tilts.
pDisplay panel
Show current status.
qALM 2
Set the second alarm timer.
View the second alarm time.
Turn off the second alarm tone.
rREPEAT ALARM/BRIGHTNESS CONTROL
Repeat an alarm tone at 9-minute intervals.
Adjust the display brightness.
sMP3 LINK
Audio input jack for an external audio device.
tTO PC
Mini USB jack for synchronization between the iPod/iPhone and a computer.
uPigtail
Improve FM reception.
•
•
•
•
•
•
•
•
•
•
•
•
DC350_12_Book 1.indd 9DC350_12_Book 1.indd 9 11/7/2008 2:05:15 PM11/7/2008 2:05:15 PM

10 EN
vDEMO
Jack for a special device (not supplied) to demonstrate features of the DC350.
wDC IN
Jack for the supplied AC adaptor.
xTilt adjustment control
Control the angle at which the iPod/iPhone tilts.
yiPhone/iPod-RADIO-BUZZER
Select alarm mode.
Overview of the remote control
aiPod/iPhone
Select iPod/iPhone source.
bPOWER
Turn on the DC350 or switch to standby mode.
Turn off an alarm tone.
•
•
•
•
•
•
•
DC350_12_Book 1.indd 10DC350_12_Book 1.indd 10 11/7/2008 2:05:15 PM11/7/2008 2:05:15 PM

English
11EN
cPRESET +/-
Select a preset radio station.
d/OK
Start or pause iPod/iPhone play.
Confirm an iPod/iPhone menu selection.
e/
Skip to the previous/next audio file.
Search within an audio file.
Tune to a radio station.
Adjust time.
fTUNER
Select tuner source.
gMENU
Access iPod/iPhone menu.
hSLEEP
Set the sleep timer.
iDBB Turn on or off dynamic bass enhancement.
jDSC Select a preset sound setting: POP, JAZZ, CLASSIC or ROCK.
kPAIRING
Pair the DC350 with a Bluetooth device.
Answer an incoming phone call.
During a phone call: select to hear the audio from the DC350 or from the
device.
lReject an incoming phone call.
End a phone call.
Disconnect a device.
mVOL +/-
Adjust volume.
nSET TIME/PROG
Set the clock.
Program radio stations.
oMP3 LINK
Audio input jack for an external audio device.
pMUTE
Mute volume.
Mute the built-in microphone during a phone call.
qBLUETOOTH
Select Bluetooth source.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
DC350_12_Book 1.indd 11DC350_12_Book 1.indd 11 11/7/2008 2:05:16 PM11/7/2008 2:05:16 PM

12 EN
3 Get started
Caution
Use the controls only as stated in this user manual.•
Always follow the instructions in this chapter in sequence.
If you contact Philips, you will be asked for the model and serial number of your DC350.
The model number and serial number are on the bottom of your DC350.Write the
numbers here:
Model No. __________________________
Serial No. ___________________________
Prepare the remote control
Caution
Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire.•
For first-time use:
1Remove the protective tab to activate the remote control battery.
To replace the remote control battery:
1Open the battery compartment.
2Insert 1 CR2025 battery with correct polarity (+/-) as indicated.
3Close the battery compartment.
Note
Before pressing any function button on the remote control, first select the correct source with the
remote control instead of the main unit.
If you are not going to use the remote control for a long time, remove the battery.
•
•
DC350_12_Book 1.indd 12DC350_12_Book 1.indd 12 11/7/2008 2:05:17 PM11/7/2008 2:05:17 PM

English
13EN
Connect power
Caution
Risk of product damage! Ensure that the power voltage corresponds to the voltage printed on the
back or underside of the DC350.
Risk of electric shock! When you unplug the AC adaptor, always pull the plug from the socket.
Never pull the cord.
Before connecting the AC adaptor, ensure you have completed all other connections.
•
•
•
1Prepare the AC adaptor.
2Connect one end of the AC adaptor to the DC IN socket on the main unit.
3Connect the other end of the AC adaptor to the wall outlet.
DC350_12_Book 1.indd 13DC350_12_Book 1.indd 13 11/7/2008 2:05:18 PM11/7/2008 2:05:18 PM

14 EN
Set clock and date
1Press and hold SET TIME for 2 seconds.
2Press repeatedly to select 12 hour or 24 hour format.
3Press SET TIME to confirm.
The hour digits are displayed and begin to blink.
4Press / to set the hour.
5Press SET TIME to confirm.
The minute digits are displayed and begin to blink.
6Repeat steps 4-5 to set minute, year, month and day.
Turn on
1Press POWER.
The DC350 switches to the last selected source.
Switch to standby
1Press POWER again to switch the DC350 to standby mode.
The clock (if set) appears on the display panel.
4 Play
Play from iPod/iPhone
You can enjoy audio from iPod/iPhone through this DC350.
Compatible iPod/iPhone
Apple iPod and iPhone models with a 30-pin dock connector:
iPod classic, iPod touch, iPod nano, iPod 5th generation (video), iPod with color
display, iPod mini.
iPhone, iPhone 3G.
»
»
»
»
•
•
DC350_12_Book 1.indd 14DC350_12_Book 1.indd 14 11/7/2008 2:05:19 PM11/7/2008 2:05:19 PM

English
15EN
Load the iPod/iPhone
1With the connectors facing each other, place the iPod/iPhone in the dock.
2Turn the tilt adjustment control to adjust the angle at which the iPod/iPhone tilts.
When the DC350 is connected to power, the docked iPod/iPhone begins to
charge.
Remove the iPod/iPhone
1Pull the iPod/iPhone out of the dock.
Listen to the iPod/iPhone
1Ensure that the iPod/iPhone is loaded correctly. (see ‘Load the iPod/iPhone’ on
page 15)
2Press iPod/iPhone to select iPod/iPhone source.
The connected iPod/iPhone plays automatically.
To pause/resume play, press .
To skip to a track, press / .
To serach during play, press and hold / , then release to resume
normal play.
To navigate the menu, press MENU, and press PRESET +/- to select, then
press /OK to confirm.
»
»
•
•
•
•
1
2
2
1
2
2
DC350_12_Book 1.indd 15DC350_12_Book 1.indd 15 11/7/2008 2:05:20 PM11/7/2008 2:05:20 PM

16 EN
Connect to a computer
1Load the iPod/iPhone in the dock.
2Press iPod/iPhone select the iPod/iPhone source.
3Connect the mini USB cable (supplied) to:
the TO PC jack (mini USB jack) on the back of the DC350.
the USB jack on the computer.
If iTunes is installed on the computer, the connected iPod/iPhone begins to
synchronize with iTunes. Refer to the device user manual for more details.
Charge the iPod/iPhone
When the DC350 is connected to power, the docked iPod/iPhone begins to charge.
Play from an external device
You can also listen to an external audio device through this DC350.
1Press MP3 Link to select MP3 link source.
2Connect the supplied MP3 link cable to:
the MP3 LINK jack (3.5mm) on the bottom of the DC350.
the headphone jack on an external device.
5 Adjust sound
Adjust volume level
1During play, press VOL +/- to increase/decrease the volume level.
Enhance bass
1During play, press DBB to turn on or off dynamic bass enhancement.
If DBB is activated, DBB is displayed.
Select a preset sound effect
1During play, press DSC repeatedly to select:
[POP] (pop)
[JAZZ] (jazz)
[CLASSIC] (classic)
[ROCK] (rock)
•
•
»
•
•
»
•
•
•
•
DC350_12_Book 1.indd 16DC350_12_Book 1.indd 16 11/7/2008 2:05:21 PM11/7/2008 2:05:21 PM

English
17EN
Mute sound
1During play, press MUTE to mute/unmute sound.
6 Listen to radio
Note
Only FM radio reception is available on this DC350.•
Tune to a radio station
1Press TUNER to select FM.
2Press and hold / for more than 2 seconds.
[Srch] (search) is displayed.
The radio tunes to a station with strong reception automatically.
3Repeat step 2 to tune to more stations.
To tune to a weak station, press / repeatedly until you find optimal
reception.
Program radio stations manually
You can program a maximum of 40 preset radio stations.
1Tune to a radio station.
2Press and hold PROG for 2 seconds to activate program mode.
“PR01” blinks on the display.
3Press PRESET +/- to allocate a number (1 to 40) to this radio station, then press
PROG to confirm.
The preset number and the frequency of the preset station are displayed.
4Repeat the above steps to program other stations.
Note
To overwrite a programmed station, store another station in its place.•
»
»
•
»
»
DC350_12_Book 1.indd 17DC350_12_Book 1.indd 17 11/7/2008 2:05:22 PM11/7/2008 2:05:22 PM

18 EN
Select a preset radio station
1Press PRESET +/- to select a preset number.
Tip
Position the antenna as far as possible fromTV,VCR or other radiation source.
For optimal reception, fully extend and adjust the position of the antenna.
•
•
7 Use Bluetooth devices
This DC350 can wirelessly receive audio from Bluetooth-enabled devices within a range
of approximately 10 meters (30 feet).
Supported Bluetooth profiles
This DC350 supports these Bluetooth profiles:
Hands-Free Profile (HFP)
Headset Profile (HSP)
Advanced Audio Distribution Profile (A2DP)
AudioVideo Remote Control Profile (AVRCP)
Tip
Before you use a Bluetooth-enabled with this DC350, read the user manual of the device for
compatibility.
•
Connect with a Bluetooth device
Note
The operational range between this DC350 and a bluetooth device is approximate 10 meters
(30 feet).
Before you connect a Bluetooth device to this DC350, familiarize yourself with the bluetooth
capabilities of the device.
Compatibility with all Bluetooth device is not guaranteed.
Any obstacle between this DC350 and a Bluetooth device can reduce the operational range by
some level depending on what substance.
Keep this DC350 away from any other electronic device that may cause interference.
•
•
•
•
•
•
•
•
•
DC350_12_Book 1.indd 18DC350_12_Book 1.indd 18 11/7/2008 2:05:23 PM11/7/2008 2:05:23 PM

English
19EN
Connect a device for the first time
1Press BLUETOOTH to select the Bluetooth source.
[BT] (Bluetooth) is displayed.
2Press and hold PAIRING for more than 3 seconds.
[PAIRING] (Pairing) is displayed, and the Bluetooth indicator blinks.
3On the device, set up the Bluetooth connection:
aEnable Bluetooth to search for other Bluetooth devices. (Refer to the
user manual on how to enable the function.)
bWhen “ PHILIPS DC350” is recognized and displayed, select it to start to
connect.
cWhen prompted for a password, enter “0000”.
4Wait until you hear a double beep from the DC350.
The connection is complete.The Bluetooth indicator turns on.
To connect more bluetooth devices
1Disconnect the connected device. (see ‘Disconnect a device’ on page 19)
2Repeat the steps 1-4 in “Connect a device for the first time”.
Tip
If no connection is made within one minute, [FAILED] (failed) is displayed on the DC350.•
Disconnect a device
1Press and hold for more than 5 seconds
[DISCONNECT] (disconnect) is displayed on the DC350.
When you turn off the connected device or move it beyond the
communication range, you hear a long beep from the DC350.
Re-connect a device
After you have connected a device for the first time, once its Bluetooth function is enabled,
it re-connects automatically. (see ‘Connect a device for the first time’ on page 19)
1Ensure that on the device, you have turned on the Bluetooth function. (Refer to
the user manual on how to enable the function.)
2Turn on the DC350.
The Bluetooth connection is automatically made, and the Bluetooth indicator
turns on.
When more than one previously-connected device is in the operational range:
If an iPhone is docked, it is re-connected first.
All other devices are re-connected sequentially:The first device that was
connected for the first time will be re-connected first.
»
»
»
»
•
»
»
DC350_12_Book 1.indd 19DC350_12_Book 1.indd 19 11/7/2008 2:05:24 PM11/7/2008 2:05:24 PM

20 EN
Tip
This DC350 can memorize the connection information of up to 8 devices.•
Receive a phone call
Note
You can receive phone calls through this DC350 with devices that support the HFP or HSP
profile.
•
1Connect the Bluetooth device. (see ‘Connect with a Bluetooth device’ on page 18)
2When a call is received, you hear the incoming call alert tone. Press PAIRING to
accept the call.
To reject the call, press .
3Speak into the MIC located on the front panel.
To increase or decrease the volume, press VOL +/-.
To mute the microphone, press MUTE.To unmute, press this button again.
To select to hear the audio from the device or from the DC350, press
PAIRING .
4Press to end the call.
Tip
To be heard more clearly, speak closer to the microphone.
If an echo is heard, reduce the volume of the DC350.
If you observe communication difficulties, position the Bluetooth device closer to this DC350.
•
•
•
Listen to music
Note
You can listen to audio through this DC350 from devices that support A2DP or AVRC.•
1Connect the Bluetooth device. (see ‘Connect with a Bluetooth device’ on page 18)
2On the Bluetooth device, start play.
You hear the music through this DC350.
To pause/resume play, press .
To skip to a track, press / .
•
•
•
•
»
•
•
DC350_12_Book 1.indd 20DC350_12_Book 1.indd 20 11/7/2008 2:05:24 PM11/7/2008 2:05:24 PM

English
21EN
8 Other features
Set the alarm timer
You can set two alarms which go off at different time.
1Ensure that you have set the clock correctly. (see ‘Set clock and date’ on page 13)
2Press and hold ALM 1 or ALM 2 on the main unit for 2 seconds.
Hour digits blink.
[AL 1] (alarm 1) or [AL 2] (alarm 2) is displayed.
3Press / repeatedly to set the hour.
4Press ALM 1 or ALM 2 to confirm.
5Press / repeatedly to set the minute.
6Press ALM 1 or ALM 2 to confirm.
To set the other alarm, repeat the steps 2 - 6.
Tip
To view alarm time, press ALM 1 or ALM 2 repeatedly until alarm time is displayed.•
Set alarm mode
1Adjust the iPhone/iPod-RADIO-BUZZER control on the main unit to select the
source for the alarm.
When the alarm time comes, the selected Phone/iPod, or radio or buzzer
turns on.
Tip
If iPod/iPhone source is selected but no iPod/iPhone is loaded, the buzzer is selected automatically.•
Activate the alarm timer
1Press repeatedly ALM 1 or ALM 2 on the main unit to activate or deactivate the
timer.
If the timer is activated, [AL 1] (alarm 1) or [AL 2] (alarm 2) is displayed.
If the timer is deactivated, [AL 1] (alarm 1) or [AL 2] (alarm 2) disappears.
Turn off the alarm tone
During an alarm tone, you can select one of the following to turn it off.
»
»
•
»
»
»
DC350_12_Book 1.indd 21DC350_12_Book 1.indd 21 11/7/2008 2:05:26 PM11/7/2008 2:05:26 PM