Philips MCM108D/98 User manual

Quick Start Guide
Step B
Step A
Enjoy
Setup
1
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
MW Antenna
Quick Start Guide
Pull out the insulation
plastic sheet.
2
User Manual
User Manual
VOLUME
ALBUM
DBB DSC
MUTE
SLEEP TIMER
REPEAT SHUFF
AUX PROG
CD TUNER
VOLUME
DBB DSC
Remote Control
MCM108D
Dock cable & 2 Docks
& 12 Dock Adapters
MCM108D_98 QUG_Eng 19/9/06, 17:361

Step A Setup
1
2
3
Tip
It is unnecessary to
connect the FM pigtail
antenna since it is
fixed to the main unit.
Connection
5
1
2
3
4
Setting the clock
iR
PROG/CLOCK
MICRO SYSTEM MCM108D
For radio reception, connect the supplied MW antenna to the
MW aerial terminal.
Connect the speaker wires to the SPEAKERS terminals.
Connect the power cord of the system to the
AC power outlet.
In standby mode, press PROG/CLOCK button.
The clock digits for the hours flash.
Press ¡1 / 2™ to set the hours.
Press PROG/CLOCK again.The clock digits for the minutes flash.
Press ¡1 / 2™ to set the minutes.
Press PROG/CLOCK to confirm the time.
AC power cord
FM wire antenna
Speaker
(right)
Speaker
(left)
MW loop antenna
1
2
2
3
MCM108D_98 QUG_Eng 19/9/06, 17:362

1
2
3
4
5
Tip
Detailed playback features and
additional functions are described in
the accompanied owner's manual.
Step B Enjoy
Playing a disc
1
2
Select TUNER source.
Press BAND (TUNER on the remote control) once or more to select your waveband.
Tu r n TUNING 0to tune to a station.
Listening to radio
3
SLEEP TIMER
REPEAT
AUX
SHUFF
PROG
CD TUNER
MUTE
CD
ALBUM
STANDBY-ON SOURCE VOLUME
-
+
BAND
O
P
E
N
/
C
L
O
S
E
PROG/CLOCK TUNING
SOURCE BAND TUNING
Select CD source.
Press OPEN•CLOSE on the top of the system to open the CD door.
Insert a disc with the printed side facing up and press down
on OPEN•CLOSE to close the CD door.
PressÉÅto start playback.
Press 9to stop playback.
Notes for the remote control:
– First, select the source you wish to
control by pressing one of the source select
keys on the remote control (CD or TUNER,
for example).
–Then select the desired function ( 2; ,
í , ë for example).
MCM108D_98 QUG_Eng 19/9/06, 17:363

Step B Enjoy
Playing iPod / Philips GoGear using the dock
1Select the correct dock supplied, as indicated on the bottom panel of the dock,
to work with either your Apple iPod or Philips GoGear.
2Select the correct dock adaptor supplied, then snap the adaptor into the dock
to provide a snug fit for the player.
●For the iPod adaptors, the indication on the adaptor’s back fits specific iPod player.
●For the Philips adaptors, a number marked on the adaptor’s back fits specific Philips GoGear player.
3Correctly place your iPod or Philips GoGear in the dock.
4Using the docking cable supplied, connect the DOCKING OUT jack and Mini-USB port
on the dock to DOCKING IN jacks (L and R) and Mini-USB port on the main set,
marked-red to R jack, and marked-white to L jack.
5Press SOURCE repeatedly or on the set (or DOCK on the remote) to select DOCK source.
● For Philips GoGear player, make sure that you have powered it on before selecting DOCK source.
●The connected player will play automatically.
●The iPod/Philips GoGear battery will be charged in either standby mode or power-on mode.
Speaker
(right)
Speaker
(left)
Portable player
Dock
sd Tip
Refer to the user manual supplied for
detailed descriptions of “Compatible
portable player”, “Selecting the correct dock
adaptor”,“Installing the dock adaptor”, and
the important notes for dock operation.
Dock cable
MCM108D_98 QUG_Eng 19/9/06, 17:364