Philips DVD702AT Technical document

1
DVD702
DigitalVideo Disc Player
Hookup Pages
Read this manual first!
Congratulations on purchasing this Philips product.
We’ve included everything you need to get started.
If you have any problems,Philips Representatives can
help you get the most from your new product by explaining:
• Hookups,
• FirstTime Setup,and
• Feature Operation.
Do not attempt to return this product to the store.
For fast help,call us first!
1-800-531-0039
Thank you for making Philips a part of your home!

10
OPTICAL (Digital audio out jack)
–connect to digital (optical) audio equipment
COAXIAL (Digital audio out jack)
–connect to digital (coaxial) audio equipment
AC Power Cord
–connect to a power source
AUDIO OUT (Left/Right) 1,2
–connect to an amplifier, receiver or stereo system
VIDEO OUTPUT Switch
– select either S-Video Out or ComponentVideo Out,
depending on how you connected the DVD Player to theTV
S-VIDEO OUT (Y/C)
–connect to aTV with S-Video (Y/C) inputs
COMPONENTVIDEO OUT Y PR/CRPB/CB
–connect to aTV withY PB/CBPR/CRinputs
VIDEO OUT (CVBS)
–connect to aTV with CVBS video inputs
Caution: Do not touch the inner pins of the jacks
on the rear panel.Electrostatic discharge may
cause permanent damage to the unit.
FUNCTIONAL OVERVIEW
Rear Panel

11
Preparation
General Notes
¶Depending on yourTV and other equipment you wish to
connect,there are various ways you could connect the
player. Use only one of the connections described below.
¶Please refer to the manuals of yourTV,VCR,Stereo System
or other devices as necessary to make the best
connections.
¶For better sound reproduction,connect the player’s audio
out jacks to the audio in jacks of your amplifier,receiver,
stereo or audio/video equipment.See‘Connecting to
optional equipment.’
Caution:
–Make sure the DVD Player is connected
directly to theTV.Set theTV to the correct video
input channel.
–Do not connect the DVD Player’s audio out
jack to the phono in jack of your audio system.
–Do not connect your DVD Player via your
VCR.The DVD image could be distorted by the
copy protection system.
Connecting to aTV
¶Make one of the following connections,depending on the
capabilities of your existing equipment.
¶When using the COMPONENTVIDEO OUT jacks, set the
VIDEO OUTPUT switch to COMPONENT.When using
the S-VIDEO OUT jack,set theVIDEO OUTPUT switch to
S-VIDEO.
ComponentVideo (Y PR/CRPB/CB)
connection
1Connect the PB/CBPR/CRY COMPONENTVIDEO OUT
jacks on the DVD Player to the corresponding in jacks on
theTV using an optional PR/CRPB/CBY cable (Z).
2Connect the Left and Right AUDIO OUT jacks (1 or 2) of
the DVD Player to the audio left/right in jacks on theTV
(A) using the supplied audio cables.
S-Video (Y/C) connection
1Connect the S-VIDEO OUT jack on the DVD Player to the
S-Video in jack on theTV using an optional S-Video cable
(Y).
2Connect the Left and Right AUDIO OUT jacks (1 or 2) of
the DVD Player to the audio left/right in jacks on theTV
(A) using the supplied audio cables.
Video (CVBS) connection
1Connect the VIDEO OUT jack on the DVD Player to the
video in jack on theTV using the video cable supplied (X).
2Connect the Left and Right AUDIO OUT jacks (1 or 2) of
the DVD Player to the audio left/right in jacks on theTV
(A) using the supplied audio cables.
TV
YXA
Z
PREPARATION

12
Connecting to Optional
Equipment
Connecting to an amplifier equipped with
two channel analog stereo or Dolby
Surround
1 Connect the Left and Right AUDIO OUT jacks of the DVD
Player to the audio left and right in jacks on your amplifier,
receiver or stereo system,using the supplied audio cables (A).
Connecting to an amplifier equipped with
two channel digital stereo (PCM) or to an
Audio/Video receiver equipped with a
multi-channel decoder (Dolby Digital™,
MPEG 2 or DTS)
1Connect one of the DVD Player’s DIGITAL AUDIO OUT
jacks (OPTICAL Gor COAXIAL F) to the corresponding
in jack on your amplifier.Use an optional digital (optical G
or coaxial F) audio cable.
2You will need to activate the player’s digital output (see
‘Personal Preferences’on page 14).
TV
YZ X
AMPLIFIER
A
GF
Digital Multi-channel sound
A digital multi-channel connection provides the best sound
quality.For this you need a multi-channel Audio/Video
receiver that supports one or more of the audio formats
supported by your DVD Player (MPEG 2,Dolby DigitalTM
and DTS).Check the receiver manual and the logos on the
front of the receiver.
Warning:
Due to the DTS Licensing agreement,the digital
output will be in DTS digital out when DTS audio
stream is selected.
Notes:
– If the audio format of the digital output does not match the
capabilities of your receiver,the receiver will produce a strong,
distorted sound or no sound at all.
– Six Channel Digital Surround Sound via digital connection
can only be obtained if your receiver is equipped with a Digital
Multi-channel decoder.
– To see the selected audio format of the current DVD in the
Display,press SYSTEM MENU orAUDIO.
PREPARATION