Philips DVP 3040K User manual

DVD VIDEO PLAYER DVP3040K
User manual
Thank you for choosing Philips.
Need help fast?
Read your User’s Manual first for quick tips that make using
your Philips product more enjoyable.
If you have read your instructions and still need assistance,
you may access our online help at www.philips.com/support
01-41_DVP3040K_93_engRC3 02/06/06, 11:24 AM1

General Information
CAUTION
(WARNING LOCATION: ON THE
BACKPLATE OF THE SET)
NEVER MAKE OR CHANGE
CONNECTIONS WITH THE
POWER SWITCHED ON.
Laser safety
This unit employs a laser. Due to possible
eye injury, only a qualified service person
should remove the cover or attempt to
service this device.
NOTE:
PICTURES SHOWN MAYBE
DIFFERENT BETWEEN
COUNTRIES.
Environmental Information
All unnecessary packaging has been
omitted.The packaging has been made
easy to separate into three materials:
cardboard (box), polystyrene foam
(buffer) and polyethylene (bags, protective
foam sheet).
Your DVD player consists of materials
which can be recycled and reused if
disassembled by a specialised company.
Please observe the local regulations
regarding the disposal of packaging
materials, exhausted batteries and old
equipment.
Important Note:
Due to the numerous versions of new
CD-Audio copy protection or
enhanced CD-Audio protection
recently available on certain discs,
Philips is unable to guarantee that
this DVD Player is fully compatible
with such new discs. Should you have
difficulty playing any such CD-Audio
discs, kindly refer them to your CD-
Audio disc retailer.
Windows Media and the Windows logo
are trademarks, or registered
trademarks of Microsoft Corporation
in the United States and/or other
countries.
DivX Certified products: "DivX" and
associated logo are trademarks of
DivX, Inc. and are used under license.
“DTS”, and “DTS Digital Surround” are
registered trademarks of Digital Theater
Systems, Inc.
01-41_DVP3040K_93_engRC3 02/06/06, 11:24 AM2

3
English
Index
English --------------------------------------- 6
-------------------------------- 42
Manufactured under license from Dolby
Laboratories. “Dolby”, “Pro-Logic”and the
double-D symbol are trademarks of
Dolby Laboratories.
Manufactured under license from Digital
Theater Systems, Inc. U.S. Pat. Nois.
5,451,942; 5,956,674; 5,974,380;
5,978,762; 6,226,616; 6,487,535 and
other U.S. and world-wide patents issued
and pending. "DTS" and "DTS Digital
Surround" are registered trademarks
of Digital Theater Systems, Inc.
All Ri
g
ht Reserved.
This product incorporates copyright
protection technology that is protected by
method claims of certain U.S. patents and
other intellectual property rights owned by
M
acrovision Corporation and other rights
owners. Use of this copyright protection
technology must be authorized by
M
acrovision Corporation, and is intended
for home and other limited viewing uses
only unless otherwise authorized by
M
acrovision Corporation. Reverse
engineering or disassembly is prohibited.
Due to the inconsistency of disc formats
provided by various disc manufacturers, your
DVD system may require a playability
enhancement or upgrade. As DVD technology
advances, these enhancements will become
common and will be easy to complete.
Go to www.philips.com/support for
software upgrade.
Manufactured under license from
Dolby Laboratories, "Dolby"
and the double-D symbol are
trademarks of Dolby Laboratories.
01-41_DVP3040K_93_engRC3 02/06/06, 11:24 AM3

LASER
Type Semiconductor laser
GaAlAs
Wave length 650 nm (DVD)
780 nm (VCD/CD)
Output Power 7 mW (DVD)
10 mW (VCD/CD)
Beam divergence 60 degree
For Customer Use:
Read carefully the information located at
the rear of your DVD VIDEO player and
enter below the Serial No. Retain this
information for future reference.
Model No. DVP 3040K
Serial No. _______________
The apparatus shall not be exposed to dripping
or splashing and no objects filled with liquids,
such as vases, shall be placed on apparatus.
Specifications are subject to change without
notice.Trademarks are the property of
Koninklijke Philips Electronics N.V. or their
respective owners.
01-41_DVP3040K_93_engRC3 02/06/06, 11:24 AM4

English
5
Abkhazian 6566
Afar 6565
Afrikaans 6570
Amharic 6577
Arabic 6582
Armenian 7289
Assamese 6583
Avestan 6569
Aymara 6589
Azerhaijani 6590
Bahasa Melayu 7783
Bashkir 6665
Belarusian 6669
Bengali 6678
Bihari 6672
Bislama 6673
Bokmål, Norwegian 7866
Bosanski 6683
Brezhoneg 6682
Bulgarian 6671
Burmese 7789
Castellano, Español 6983
Catalán 6765
Chamorro 6772
Chechen 6769
Chewa; Chichewa; Nyanja7889
9072
Chuang; Zhuang 9065
Church Slavic; Slavonic 6785
Chuvash 6786
Corsican 6779
Česky 6783
Dansk 6865
Deutsch 6869
Dzongkha 6890
English 6978
Esperanto 6979
Estonian 6984
Euskara 6985
 6976
Faroese 7079
Français 7082
Frysk 7089
Fijian 7074
Gaelic; Scottish Gaelic 7168
Gallegan 7176
Georgian 7565
Gikuyu; Kikuyu 7573
Guarani 7178
Gujarati 7185
Hausa 7265
Herero 7290
Hindi 7273
Hiri Motu 7279
Hrwatski 6779
Ido 7379
Interlingua (International)7365
Interlingue 7365
Inuktitut 7385
Inupiaq 7375
Irish 7165
Íslenska 7383
Italiano 7384
Ivrit 7269
Japanese 7465
Javanese 7486
Kalaallisut 7576
Kannada 7578
Kashmiri 7583
Kazakh 7575
Kernewek 7587
Khmer 7577
Kinyarwanda 8287
Kirghiz 7589
Komi 7586
Korean 7579
Kuanyama; Kwanyama 7574
Kurdish 7585
Lao 7679
Latina 7665
Latvian 7686
Letzeburgesch; 7666
Limburgan; Limburger 7673
Lingala 7678
Lithuanian 7684
Luxembourgish; 7666
Macedonian 7775
Malagasy 7771
Magyar 7285
Malayalam 7776
Maltese 7784
Manx 7186
Maori 7773
Marathi 7782
Marshallese 7772
Moldavian 7779
Mongolian 7778
Nauru 7865
Navaho; Navajo 7886
Ndebele, North 7868
Ndebele, South 7882
Ndonga 7871
Nederlands 7876
Nepali 7869
Norsk 7879
Northern Sami 8369
North Ndebele 7868
Norwegian Nynorsk; 7878
Occitan; Provencal 7967
Old Bulgarian;Old Slavonic 6785
Oriya 7982
Oromo 7977
Ossetian; Ossetic 7983
Pali 8073
Panjabi 8065
Persian 7065
Polski 8076
Português 8084
Pushto 8083
Russian 8285
Quechua 8185
Raeto-Romance 8277
Romanian 8279
Rundi 8278
Samoan 8377
Sango 8371
Sanskrit 8365
Sardinian 8367
Serbian 8382
Shona 8378
Shqip 8381
Sindhi 8368
Sinhalese 8373
Slovensky 8373
Slovenian 8376
Somali 8379
Sotho; Southern 8384
South Ndebele 7882
Sundanese 8385
Suomi 7073
Swahili 8387
Swati 8383
Svenska 8386
Tagalog 8476
Tahitian 8489
Tajik 8471
Tamil 8465
Tatar 8484
Telugu 8469
Thai 8472
Tibetan 6679
Tigrinya 8473
Tonga (Tonga Islands) 8479
Tsonga 8483
Tswana 8478
Türkçe 8482
Turkmen 8475
Twi 8487
Uighur 8571
Ukrainian 8575
Urdu 8582
Uzbek 8590
Vietnamese 8673
Volapuk 8679
Walloon 8765
Welsh 6789
Wolof 8779
Xhosa 8872
Yiddish 8973
Yoruba 8979
Zulu 9085
Language Code
01-41_DVP3040K_93_engRC3 02/06/06, 11:24 AM5

English
6
Language ...................................................................... 5
Introduction
Supplied accessories ....................................... 8
Cleaning discs ................................................... 8
Setup ................................................................... 8
Connections
Connecting TV ............................................ 9-12
Using Composite Video jacks (CVBS)........ 9
Using Component Video jacks (Pr Pb Y) ... 9
Using an accessory RF modulator ............ 10
Connecting the power cord ........................ 10
Optional : Optional: Connecting to a Multi-
channel Receiver ............................................ 11
Receiver has a Dolby Digital or DTS
decoder ........................................................... 11
Optional : Connecting to a Stereo System ..
........................................................................... 11
Stereo system has Dolby Pro Logic or Right
/ Left Audio In jack ....................................... 11
Optional: Connecting Digital AV Receiver ...
........................................................................... 12
Receiver has a PCM, Dolby Digital, or
MPEG2 decoder ............................................ 12
Functional Overview
Front and Rear Panels .................................. 13
Remote Control ............................................ 14
Getting Started
Step 1: Inserting batteries into the
Remote Control ............................................ 15
Using the Remote Control to operate the
Player ............................................................... 15
Step 2: Setting up the TV ........................ 15-17
Setting up Progressive Scan feature (for
Progressive Scan TV only) ........................... 16
Selecting the colour system that
corresponds to your TV .............................. 17
Step 3: Setting language preference ........... 18
Setting the OSD Language .......................... 18
Setting the Audio, Subtitle and Disc menu
language .......................................................... 18
Disc Operations
Playable Discs ................................................. 19
Region Codes ................................................. 19
Playing discs ..................................................... 20
Basic playback controls................................. 20
Operations for video playback ............. 20-21
Using the Disc Menu.................................... 20
Zooming in ..................................................... 21
Resuming playback from the last stopped
point ................................................................ 21
Slow motion ................................................... 21
Forward / Reverse Searching ..................... 21
OSD (On-Screen Display) (DVD/VCD/
SVCD) ........................................................ 21-23
Using the OSD menu .................................. 21
Title/Chapter/Track selection .................... 21
Time Search ............................................. 21-22
Audio/Subtitle ................................................ 22
Angle ................................................................ 22
Repeat ............................................................. 22
Repeat A-B ..................................................... 22
Preview Function ................................... 22-23
OSD (On-Screen Display) Audio CD ....... 23
Disc Go To/Track Go To/ Track Selection . 23
Repeat ............................................................. 23
Special DVD features .................................... 23
Playing a Title ................................................. 23
Changing the Audio Language .................... 23
Subtitles .......................................................... 23
Special VCD & SVCD Features ................... 24
Playback Control (PBC) .............................. 24
Playing a DivX disc ........................................ 24
Playing MP3/WMA/JPEG/Kodak Picture CD
..................................................................... 24-25
General Operation ....................................... 24
Playback selection ......................................... 25
Zoom picture (JPEG) ................................... 25
Playback with multi-angles (JPEG) ............. 25
Preview Function (JPEG) ............................. 25
Playing MP3/WMA music and JPEG picture
simultaneously ............................................... 25
Karaoke Operations
Playing Karaoke discs .................................... 26
General Operation ....................................... 26
Vocal ................................................................ 26
Karaoke ........................................................... 26
Contents
01-41_DVP3040K_93_engRC3 02/06/06, 11:25 AM6

English
7
DVD Setup Menu Options
General Setup menu ............................... 27-28
Locking/Unlocking the disc for viewing ... 27
Dimming player’s display panel .................. 27
Programming disc tracks ....................... 27-28
OSD Language ............................................... 28
Sleep ................................................................ 28
DivX(R) VOD registration code ............... 28
Audio Setup Menu ................................... 29-31
Analogue output ........................................... 29
Digital Audio Setup ....................................... 29
Sound Mode ................................................... 30
Speaker Setup ................................................ 30
CD Upsampling ............................................. 30
Night Mode - turning on/off ....................... 31
Video Setup Menu ................................... 31-33
TV Type ........................................................... 31
Setting the TV Display ................................. 32
Progressive - turning on/off ........................ 32
Picture Setting ............................................... 33
Preference Page ........................................ 34-36
Audio, Subtitle, Disc Menu .......................... 34
Restricting playback by Parental Control .....
.................................................................. 34-35
PBC .................................................................. 35
MP3/JPEG Menu - turning on/off ............... 35
Changing the Password ............................... 36
Setting the DivX Subtitle font ................... 36
Restoring to original settings ..................... 36
Sound and Volume Controls ..... 37
Setting the speakers’ channels .................... 37
Troubleshooting .......................... 38-39
Specifications ...................................... 40
Glossary ...................................................................... 41
Contents
01-41_DVP3040K_93_engRC3 02/06/06, 11:25 AM7

English
8
Supplied accessories
Remote Control
and
two AAA batteries
Introduction
Cleaning discs
To clean a disc, use a micro fibre cleaning
cloth and wipe the disc from the center
to the edge in a straight line.
CAUTION!
Do not use solvents such as benzene,
thinner, commercially available cleaners, or
anti-static sprays intended for discs.
Since the optical unit (laser) of the DVD
system operates at a higher power than
regular DVD or CD players, cleaning CDs
intended for DVD or CD players may
damage the optical unit (laser).Therefore,
refrain from using a cleaning CD.
Setup
Finding a suitable location
– Place the set on a flat, hard and stable
surface. Do not place the set on a carpet.
– Do not position the set on top of
other equipment that might heat it up
(e.g., receiver or amplifier).
– Do not put anything under the set (e.g.,
CDs, magazines).
– Install this system near the AC outlet
and where the AC power plug can be
reached easily.
Space for ventilation
– Place the apparatus in a location with
adequate ventilation to prevent internal
heat build up. Allow at least 10 cm (4.0”)
clearance from the rear and the top of
the set and 5cm (2.0”) from the left and
right to prevent overheating.
10cm (4.0") 10cm (4.0")
5cm (2.0")
5cm (2.0")
Avoid high temperatures, moisture,
water and dust
– Apparatus shall not be exposed to
dripping or splashing.
– Do not place any sources of danger on
the apparatus (e.g., liquid filled objects,
lighted candles).
Composite video
cable (yellow)
Audio cable
(white, red)
01-41_DVP3040K_93_engRC3 02/06/06, 11:25 AM8

English
9
Connections
Connecting TV
IMPORTANT!
– You only need to make one video
connection from the following
options, depending on the
capabilities of your TV system.
– Connect the DVD system directly
to the TV.
Using Composite Video jacks
(CVBS)
1Use the composite video cable (yellow) to
connect the DVD Player’s CVBS (VIDEO)
jack to the video input jack (or labeled as
A/V In,Video In, Composite or Baseband)
on the TV (cable supplied).
2To hear the sound of this DVD Player
through your TV, use the audio cables
(white/red) to connect [FRONT (L/R)]
jacks of the DVD Player to the
corresponding AUDIO IN jacks on the TV
(cable supplied).
IMPORTANT!
– The progressive scan video
quality is only possible when usingY
Pb Pr and a progressive scan TV is
required.
Using Component Video jacks
(Y Pb Pr)
1Use the component video cables (red/
blue/green) to connect the DVD system’s
Y Pb Pr jacks to the corresponding
Component video input jacks (or labeled
as Y Pb Pr) on the TV (cable not supplied).
2To hear the sound of this DVD Player
through your TV, use the audio cables
(white/red) to connect [FRONT (L/R)]
jacks of the DVD Player to the
corresponding AUDIO IN jacks on the TV
(cable supplied).
3Proceed to page 16 for detailed
Progressive Scan set up.
AUDIO
IN
V (Pr/Cr)
U (Pb/Cb)
Y
S-VIDEO
IN
VIDEO IN
COMPONENT
VIDEO IN
AUDIO
IN
V(Pr/Cr)
U(Pb/Cb)
Y
S-VIDEO
IN
VIDEOIN
COMPONENT
VIDEOIN
2
1
AUDIO
IN
V (Pr/Cr)
U (Pb/Cb)
Y
S-VIDEO
IN
VIDEO IN
COMPONENT
VIDEO IN
AUDIO
IN
V(Pr/Cr)
U(Pb/Cb)
Y
S-VIDEO
IN
VIDEOIN
COMPONENT
VIDEOIN
2
1
01-41_DVP3040K_93_engRC3 02/06/06, 11:25 AM9

English
10
Connections
IMPORTANT!
– If yourTV only has a single
Antenna In jack (or labeled as 75
ohm or RF In,) you will need an RF
modulator in order to view the DVD
playback on the TV. See your
electronics retailer or contact
Philips for details on RF modulator
availability and operations.
Using an accessory RF modulator
1Use the composite video cable (yellow) to
connect the DVD player’s CVBS (VIDEO
OUT) jack to the video input jack on the
RF modulator.
2Use the RF coaxial cable (not supplied) to
connect the RF modulator to your TV’s
RF jack.
Connecting the power cord
AUDIO IN
R L
VIDEO
IN
TO TVINT IN
CH3 CH4
2
1
RF coaxial cable to TV
Back of RF Modulator
(example only)
Antenna or
Cable TV signal
~AC MAINS
AUDIO
OUT
V(Pr/Cr)
U(Pb/Cb)
Y
S-VIDEO
IN
VIDEOIN
COMPONENT
VIDEOIN
After everything is connected
properly, plug in the AC power cord
to the power outlet.
Never make or change any connections
with the power switched on.
When no disc is loaded, press
STANDBY ON on the DVD Player
front panel,
“NO DISC” may appear on the
display panel.
NO DISC
01-41_DVP3040K_93_engRC3 02/06/06, 11:25 AM10

English
11
Optional: Connecting to a Multi-
channel Receiver
Receiver has a Dolby Digital or DTS
decoder
1Select one of the video connections
(CVBS VIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your TV.
2Connect the Audio Out Left and Right
jack for Front and Rear speakers to the
corresponding input sockets on your
Receiver (cable not supplied).
3Connect the Audio Out for Center
speaker and Subwoofer to the
corresponding inputs on your Receiver
(cable not supplied).
4Set the DVD Player’s Analog Output to
‘Multichannel’ to enable playback of DVDs
recorded in Multi-channel. (see page 29
“Setting the analogue output”).
Helpful Hint:
–If the subwoofer is equipped with its own
amplifier, the Subwoofer connection should
be connected directly to the subwoofer.
Stereo system has Dolby Pro Logic
or Right / Left Audio In jack
1Select one of the video connections
(CVBS VIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your TV.
2Use the audio cables (white/red) to
connect [FRONT (L/R)] jacks of the DVD
Player to the corresponding AUDIO IN
jacks on the stereo system (cable
supplied).
Connections
MULTICHANNEL AUDIO IN
SUBW.
AV Receiver
REARFRONT
CENTERREARFRONT
LL
RR
AUDIO
IN
STEREO
DIGITAL
Optional: Connecting to a Stereo
System
01-41_DVP3040K_93_engRC3 02/06/06, 11:25 AM11

English
12
Connections
Optional: Connecting Digital AV
Receiver
Receiver has a PCM, Dolby Digital,
or MPEG2 decoder
1Select one of the video connections
(CVBS VIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your TV.
2Connect the COAXIAL jack of the DVD
player to the corresponding Digital Audio
In jack on your Receiver (cable not
supplied).
3Set the DVD player’s Digital Output to
PCM-ONLY or ALL depending on the
capabilities of your Receiver (see page 29
“Digital Output”).
Helpful Hint:
–If the audio format of the Digital Output
does not match the capabilities of your
receiver, the receiver will produce a strong,
distorted sound or no sound at all.
AUDIO
IN
DIGITAL
AV Receiver
01-41_DVP3040K_93_engRC3 02/06/06, 11:25 AM12

English
13
Functional Overview
Front and Rear Panels
Caution: Do not touch the inner pins of the jacks on the rear panel.
Electrostatic discharge may cause permanent damage to the unit.
Multichannel Audio Out
– Center speaker, subwoofer, front
and rear speakers multichannel
connection
COAXIAL (Digital audio out)
– Connect to coaxial AUDIO input of a
digital audio equipment
Mains (AC Power Cord)
– Connect to a standard AC outlet
VIDEO OUT (CVBS)
– Connect to CVBSVideo input of a TV
YPbPr (Component Video Out)
– Connect to YPbPr input of a TV
STANDBY-ON B
– Turns the player on or switches it to
standby mode
Disc tray
OPEN/CLOSE /
– Opens or closes the disc tray
Display
– Shows the information about the current
status of the DVD Player
LEVEL
– Microphone volume control
MIC
– For connecting microphone
9 STOP
– Stops playback
2; PLAY/PAUSE
– Starts or pauses playback
IR Sensor
– Point the remote control towards this
sensor
01-41_DVP3040K_93_engRC3 02/06/06, 11:25 AM13

English
14
Functional Overview
Remote Control
Helpful Hint:
Press “STOP” for about 2 seconds to
OPEN or CLOSE disc tray.
B
– Turns the player on or switches
it to standby mode
DISPLAY
– Displays information on TV
screen during playback
1 2
– Cursor buttons for moving to
the left or right, do a forward/
reverse search
3 4
– Cursor buttons for moving up/
down, do a slow forward/
backward
OK
– Confirms an entry or selection
SETUP
– Enters or exits system setup
menu.
Alphanumeric keypad 0-9
– Selects numbered items in a
menu
AUDIO
– Selects an audio language (DVD/
VCD) or audio channels.
DISC MENU
– Enters or exits the disc contents
menu
– Switches on or off the playback
control mode (for VCD version
2.0 only)
RETURN / TITLE
– To go back to previous menu / show
title menu
PREV ( J)
– Skips to the previous title/chapter/
track
NEXT ( K)
– Skips to the next title/chapter/track
STOP ( 9)
– Stops playback
PLAY/PAUSE ( 2; )
– Starts or pauses playback
MUTE ( H)
– Disables or enables sound output
SUBTITLE
– Selects a DVD subtitle language
ZOOM
– Enlarge a picture on the TV screen
VOCAL
– Choose audio channels or karaoke
methods
KARAOKE
– To toggle between ‘Mic’,‘Vol’,‘Echo’
or ‘Key’.
01-41_DVP3040K_93_engRC3 02/06/06, 11:25 AM14

English
15
Getting Started
Step 1: Inserting batteries into
the Remote Control
1Open the battery compartment.
2Insert two batteries type R03 or AAA,
following the indications (+-) inside
the compartment.
3Close the cover.
Using the Remote Control to
operate the Player
1Aim the Remote Control
directly at the remote
sensor (IR) on the front
panel.
2Do not put any objects
between the Remote
Control and the DVD
player while operating the
DVD player.
CAUTION!
–Remove batteries if they are
exhausted or if the Remote Control
is not being used for a long time.
–Do not use old and new or
different types of batteries in
combination.
–Batteries contain chemical
substances, so they should be
disposed properly.
Step 2: Setting up the TV
IMPORTANT!
Make sure you have completed all
the necessary connections. (See
pages 9-10 “Connecting TV”).
1Turn on the TV and set to the correct
video-in channel. You should see the DVD
background screen on the TV.
2Usually these channels are between the
lowest and highest channels and may be
called FRONT,A/V IN, or VIDEO. See your
TV manual for more details.
➜Or, you may go to channel 1 on your
TV, then press the Channel down button
repeatedly until you see the Video In
channel.
➜Or, the TV Remote Control may have a
button or switch that chooses different
video modes.
➜Or, set the TV to channel 3 or 4 if you
are using an RF modulator.
3If you are using external equipment, (e.g..
audio system or receiver), turn it on and
select the appropriate input source for
the DVD player output. Refer to the
equipment owner’s manual for detail.
01-41_DVP3040K_93_engRC3 02/06/06, 11:25 AM15

English
16
Setting up Progressive Scan feature
(for Progressive ScanTV only)
The progressive scan display twice as
many frames per second as interlaced
scanning (ordinary normal TV system).
With nearly double the number of lines,
progressive scan offers higher picture
resolution and quality.
IMPORTANT!
Before enabling the progressive scan
feature, you must ensure:
1) Your TV can accept progressive signals,
a progressive scan TV is required.
2) You have connected the DVD player to
your TV using Y Pb Pr (see page 9.)
1Turn on your TV.
2Turn off your TV progressive scan mode
or turn on interlaced mode (refer to your
TV user manual.)
3Press POWER Bon the remote control
to turn on the DVD player.
4Select the correctVideo Input channel.
(See page 15).
➜The DVD background screen appears
on the TV.
5Press SETUP.
6Press 2to select {VIDEO SETUP PAGE}.
Set P-SCAN On/Off
- - Video Setup Page - -
TV Type
TV Display
Progressive On
Picture Setting Off
7Select {PROGRESSIVE} to {ON}, then OK
to confirm.
➜The instruction menu appears on the
TV.
ACTIVATING P OG ESSIVE SCAN:
1. ENSU E YOU TV HAS P OG ESSIVE SCAN.
2. CONNECT USING YPBP (GB ) VIDEO CABLE.
3. IF THE E IS A DISTO TED PICTU E, WAIT
15 SECONDS FO AUTO ECOVE Y.
Cancel
OK
8Press 1to highlight
OK
in the menu
and press OK to confirm.
There will be a distorted picture on
your TV at this state until you turn
on the progressive scan mode on
your TV.
9Turn on your TV progressive scan mode
(refer to your TV user manual.)
➜The below menu appears on the TV.
CONFI M AGAIN TO USE P OG ESSIVE
SCAN. IF PICTU E IS GOOD,
P ESS OK BUTTON ON EMOTE.
Cancel
OK
0Press 1to highlight
OK
in the menu
and press OK to confirm.
➜The set up is complete now and you
can start enjoy the high quality picture.
To deactivate Progressive manually:
●Wait for 15 seconds for auto recovery.
OR
1Press OPEN CLOSE 0on the DVD
player to open the disc tray.
2Press numeric keypad ‘1’on the
remote control for few seconds.
➜The DVD background screen appears
on the TV.
Helpful Hint:
–There are some progressive scanTV and
High-DefinitionTV sets that are not fully
compatible with this DVD system, resulting in
the unnatural picture when playing back a
DVD VIDEO disc in the progressive scan
mode. In such a case, turn off the
progressive scan feature on both the DVD
player and yourTV set.
Getting Started
TIPS: The underlined option is the factory default setting.
Press 1to go back to the previous menu item. Press SETUP to exit the menu item.
01-41_DVP3040K_93_engRC3 02/06/06, 11:25 AM16

English
17
Selecting the colour system that
corresponds to your TV
This DVD player is compatible with both
NTSC and PAL. In order for a DVD disc
to play on this player, the colour system of
the Disc, the TV and the DVD player
should match.
NTSC TV
- - Video Setup Page - -
TV Type PAL
TV Display Multi
Progressive NTSC
Picture Setting
1Press SETUP.
2Press 2to select {VIDEO SETUP PAGE}.
3Press 34to highlight {TV TYPE}, then
press 2.
4Press 34to highlight one of the options
below:
PAL – Select this if the connected TV is
PAL system. It will change the video signal
of a NTSC disc and output in PAL format.
NTSC – Select this if the connected TV
is NTSC system. It will change the video
signal of a PAL disc and output in NTSC
format.
Multi – Select this if the connected TV is
compatible with both NTSC and PAL
(multi-system). The output format will be
in accordance with the video signal of the
disc.
Getting Started
5Select an item and press OK.
➜Follow the instructions shown on the
TV to confirm the selection (if any).
Helpful Hints:
– Before changing the currentTV
Standard setting, ensure that your TV
supports the ‘selected TV Type’ system.
– If there is no proper picture on
your TV, wait for 15 seconds for auto
recovery.
CHANGING PAL TO NTSC:
1. ENSU E THAT YOU TV SUPPO TS
NTSC STANDA D.
2. IF THE E IS A DISTO TED PICTU E
DISPLAYED ON THE TV, WAIT 15
SECONDS FO AUTO ECOVE Y.
CANCELOK
CONFI M AGAIN TO USE NEW TV
TYPE SETTING.
CANCELOK
To reset to defaultTV colour system
manually:
●Wait for 15 seconds for auto recovery.
OR
1Press OPEN CLOSE 0on the DVD
player to open the disc tray.
2Press numeric keypad ‘3’on the
remote control for few seconds.
➜The DVD background screen appears
on the TV.
TIPS: The underlined option is the factory default setting.
Press 1to go back to the previous menu item. Press SETUP to exit the menu item.
01-41_DVP3040K_93_engRC3 02/06/06, 11:25 AM17

English
18
Step 3: Setting language
preference
The language options are different
depending on your country or region. It
may not correspond to the illustrations
shown on the user manual.
Setting the OSD Language
The On-screen language for the system
menu will remain as you set it, regardless
of various disc languages.
Set OSD Language English
- - General Setup Page - -
Disc Lock
Display Dim
Program
OSD Language ENGLISH
Sleep
DIVX( ) Vod Code
1Press SETUP.
2Press 2to select {GENERAL SETUP
PAGE}.
3Press 34to highlight {OSD
LANGUAGE}, then press 2.
4Press 34 to select a language and press
OK.
Getting Started
Setting the Audio, Subtitle and Disc
menu language
You can choose your own preferred
language or soundtrack from audio,
subtitles and disc menu languages. If the
language selected is not available on the
disc, the disc’s default language will be
used instead.
Set Preference To English
Audio English
Subtitle Chinese
Disc Menu French
Parental Spanish
PBC Portuguese
Mp3/Jpeg nav Polish
Password Italian
- - Preference Page - -
1Press STOP twice then, press SETUP.
2Press 2to select {PREFERENCE PAGE}.
3Press 34 to highlight one of the options
below at a time, then press 2.
– ‘Audio’ (disc’s soundtrack)
– ‘Subtitle’ (disc’s subtitles)
– ‘Disc Menu’ (disc’s menu)
4Press 34 to select a language and press
OK.
If the language you want is not in the
list, then select {OTHERS},
then use the numeric keypad (0-9) on
the remote to enter the 4-digit language
code ‘XXXX’ (see page 5 “Language
Code”) and press OK.
5Repeat steps 3~4for other language
settings.
TIPS: The underlined option is the factory default setting.
Press 1to go back to the previous menu item. Press SETUP to exit the menu item.
01-41_DVP3040K_93_engRC3 02/06/06, 11:25 AM18

English
19
Disc Operations
IMPORTANT!
–If the inhibit icon (ø) appears on
the TV screen when a button is
pressed, it means the function is not
available on the current disc or at
the current time.
–Depending on the DVD or VIDEO
CD, some operations may be
different or restricted.
–Do not push on the disc tray or
put any objects other than disc on
the disc tray. Doing so may cause
the disc player malfunction.
Playable Discs
Your DVD Player will play:
– Digital Video Discs (DVDs)
– Video CDs (VCDs)
– Super Video CDs (SVCDs)
– Digital Video Discs +
Recordable[Rewritable] (DVD+R[W])
– Compact Discs (CDs)
– MP3 discs, picture (Kodak, JPEG)
files on CD-R(W).
– JPEG/ISO 9660 format
– Maximum 30 characters display.
– Supported sampling frequencies :
32 kHz, 44.1 kHz, 48 kHz (MPEG-1)
16 kHz, 22.05 kHz, 24 kHz (MPEG-2)
– Supported Bit-rates : 32~256 kbps
(MPEG-1), 8~160 kbps (MPEG-2)
variable bitrates
– WMA files on CD-R(W).
– Supported Bit-rates : 32~192 kbps
– DivX disc on CD-R[W]/DVD+R[W]:
– DivX 3.11, 4.x, 5.x and 6.x
– Q-pel accurate motion compensation
– Global Motion Compensation (GMC)
playback
SUPER VIDEO
Region Codes
This DVD player is designed to support
the Region Management System. Check
the regional code number on the disc
package. If the number does not match
the player’s region number (see table
below), the player may be unable to
playback the disc.
Helpful Hints:
–It may not be possible to play CD-R/RW
or DVD-R/RW in all cases due to the type of
disc or condition of the recording.
–If you are having trouble playing a
certain disc, remove the disc and try a
different one. Improperly formatted disc will
not play on this DVD Player.
TIPS: The operating features described here might not be possible for certain discs. Always refer
to the instructions supplied with the discs.
Region
Discs that can
be played
(Example)
U.S.A. and
Canada regions
U.K and
Europe regions
Asia Pacific,Taiwan,
Korea
Australia, New
Zealand, Latin America
ALL
ALL
ALL
ALL
1
2
3
4
ALL 5
Russia and India regions
ALL
6
China, Calcos Islands,
Walls and Futuna Islands
01-41_DVP3040K_93_engRC3 02/06/06, 11:25 AM19

English
20
Disc Operations
Basic playback controls
Unless otherwise stated, all operations
described are based on Remote Control
use.
Pausing playback
1During playback, press PLAY/PAUSE 2;
to pause playback and display a still
picture.
➜Sound will be muted.
2To resume normal playback, press
PLAY/PAUSE 2; again.
TIPS: The operating features described here might not be possible for certain discs. Always refer
to the instructions supplied with the discs.
Playing discs
1Connect the power cords of the DVD
player and TV (and any optional stereo or
AV receiver) to a power outlet.
2Turn on the TV power and set to the
correctVideo In channel. (See page 15
“Setting up the TV”).
3Press STANDBY-ON to turn on the
DVD player.
➜The DVD background screen appears
on the TV.
4Press OPEN/CLOSE 0on the front of
the DVD player.
●You can also hold down the STOP Ç
button on the remote control to open
and close the disc tray.
5Place a disc into the disc tray with the lable
facing up, then press OPEN/CLOSE 0.
➜For double-sided discs, load the side
you want to play facing up.
6Playback may start automatically. If not
press PLAY/PAUSE 2; .
➜If a disc menu appears on the TV, see
page 20 “Using the Disc Menu”.
➜If the disc is locked by parental control,
you must enter your six-digit password.
(See page 33).
●For more playback features,see pages 20–25.
Selecting track/chapter
●Press PREV J/ NEXT Kto go to the
previous or next track/chapter.
●In STOP mode, press DISPLAY to
display the disc information text line for
title/chapter/track (example - 00/08).
●Use alphanumeric keypad (0-9) to
enter valid title/chapter/track number,
then press OK.
➜The playback skips to the selected title/
chapter/track.
Stopping playback
●Press STOP Ç.
Helpful hints:
–Screen saver will start automatically if the
disc playback is stopped/paused for 5 minutes.
–The player will automatically switch to
Power Standby mode if you do not press any
buttons for 15 minutes after the disc has
stopped playing.
Operations for video playback
(DVD/VCD/SVCD)
Using the Disc Menu
Depending on the disc, a menu may
appear on the TV screen once you load in
the disc.
To select a playback feature or item
●Use 1234keys or numeric keypad
(0-9) on the remote, then press OK to
start playback.
To access or remove the menu
●Press DISC MENU on the remote.
01-41_DVP3040K_93_engRC3 02/06/06, 11:25 AM20