Philips DVP3111SL User manual

Register your product and get support at
www.philips.com/welcome
EN User manual
DVP3111
EN.indd Sec3:1EN.indd Sec3:1 2009-7-29 11:27:232009-7-29 11:27:23

3
English
EN
Contents
1 Important 4
Safety and important notice 4
Trademark notice 5
2 Your DVD player 6
Feature highlights 6
Product overview 6
3 Connect 8
Connect video cables 8
Connect audio cables 9
Route audio to other devices 9
Connect power 9
4 Get started 10
Prepare the remote control 10
Find the correct viewing channel 10
Select menu display language 10
Turn on progressive scan 10
5 Play 12
Play a disc 12
Play video 12
Play music 14
Play photo 15
6 Adjust settings 17
General setup 17
Audio setup 17
Video setup 18
Preferences 19
7 Additional information 21
Care 21
Specifications 21
8 Troubleshooting 23
9 Glossary 24
EN.indd Sec1:3EN.indd Sec1:3 2009-7-29 11:27:392009-7-29 11:27:39

4
When this crossed-out wheeled bin symbol
is attached to a product it means that the
product is covered by the European Directive
2002/96/EC. Please inform yourself about the
local separate collection system for electrical
and electronic products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste.
Correct disposal of your old product helps to
prevent potential negative consequences for
the environment and human health.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed with normal household
waste.
Please inform yourself about the local rules
on separate collection of batteries because
correct disposal helps to prevent negative
consequences for the environmental and
human health.
Copyright notice
This product incorporates copyright
protection technology that is protected
by method claims of certain U.S. patents
and other intellectual property rights
owned by Macrovision Corporation and
other rights owners. Use of this copyright
protection technology must be authorised
by Macrovision Corporation, and is intended
for home and other limited viewing uses only
unless otherwise authorised by Macrovision
Corporation. Reverse engineering or
disassembly is prohibited.
1 Important
Safety and important notice
Warning
Risk of overheating! Never install the product•
in a confined space. Always leave a space
of at least 4 inches around the product for
ventilation. Ensure curtains or other objects
never cover the ventilation slots on the
product.
Never place the product, remote control or•
batteries near naked flames or other heat
sources, including direct sunlight.
Only use this product indoors. Keep this•
product away from water, moisture and liquid-
filled objects.
Never place this product on other electrical•
equipment.
Keep away from this product during lightning•
storms.
Where the mains plug or an appliance•
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
Visible and invisible laser radiation when open.•
Avoid exposure to beam.
This product complies with the radio
interference requirements of the European
Community.
This product complies with the requirements
of the following directives and guidelines:
2004/108/EC + 2006/95/EC
Disposal of your old product and
batteries
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
EN
EN.indd Sec1:4EN.indd Sec1:4 2009-7-29 11:27:392009-7-29 11:27:39

5
Trademark notice
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
‘DVD Video’ is a trademark of DVD Format/
Logo Licensing Corporation.
“DivX, DivX” Certified, and associated logos
are trademarks of DivX, Inc. and are used
under license.
Play DivX® video with menus, subtitles and
audio tracks.
CLASS 1
LASER PRODUCT
English
EN
EN.indd Sec1:5EN.indd Sec1:5 2009-7-29 11:27:402009-7-29 11:27:40

6
b Disc compartment
c Indicators
d IR sensor
Remote sensor.•
e
Open or close the disc•
compartment.
f
Start, pause or resume disc play.•
Remote control
a (Standby-On)
Turn on the DVD player or switches•
to standby mode.
4
3
6
7
9
8
1
5
2
16
17
12
15
13
14
10
11
18
2 Your DVD
player
Congratulations on your purchase, and
welcome to Philips! To fully benefit from the
support that Philips offers, register your product
at www.philips.com/welcome.
Feature highlights
Screen Fit
View the movie in full screen display on any
TV.
Progressive scan video
Push the limits of standard resolution and
provide a more film-like DVD video display on
a TV screen.
Region codes
You can play discs with the following region
codes.
DVD region code Countries
Russia
Product overview
Main unit
a
Turn on the unit or switch to•
standby.
a b c de f
EN
EN.indd Sec1:6EN.indd Sec1:6 2009-7-29 11:27:402009-7-29 11:27:40

7
l REPEAT A-B
Mark the section for repeat play, or•
turn off repeat mode.
m AUDIO
Select an audio language or channel.•
n (Stop)
Stop disc play.•
o (Play/Pause)
Start, pause or resume disc play.•
p INFO
For discs, display information about•
the current status or the disc.
For slide shows, display a thumbnail•
view of photo files.
q OK
Confirm an entry or selection.•
r SETUP
Access or exit the setup menu.•
b
(Open/Close)
Open or close the disc•
compartment.
c DISC MENU
Access or exit the disc menu.•
For VCD and SVCD, turn PBC•
(playback control) on or off in PBC
mode.
d (Navigation buttons)
Navigate through the menus.•
Search fast-forward (right) or fast-•
backward (left). Press repeatedly to
change the search speed.
Search slow-forward (up) or slow-•
backward (down). Press repeatedly
to change the search speed.
e BACK
Return to the previous menu.•
For DVD, navigate to title menu.•
For VCD version 2.0 or SVCD with•
PBC turned on, return to the menu.
f / (Previous/Next)
Skip to the previous or next title,•
chapter, or track.
Press and hold for fast-backward or•
fast-forward search.
g (Mute)
Mute ot restore audio output.•
h Numeric buttons
Select an item to play.•
i SUBTITLE
Select a subtitle language for video.•
j ZOOM
Fit the picture format to the TV•
screen (using zoom factor 1.3X and
1.6X).
Zoom in or out of the picture.•
k REPEAT
Toggle between various repeat•
modes.
English
EN
EN.indd Sec1:7EN.indd Sec1:7 2009-7-29 11:27:412009-7-29 11:27:41

8
Option 1: Connect to component
video jacks
1 Connect the component video cables
(not supplied) to:
the• Y Pb Pr jacks on this product.
the COMPONENT VIDEO input•
jacks on the TV.
Tip
The component video input jacks on the TV•
may be labeled as Y Pb/Cb Pr/Cr or YUV.
This type of connection provides good picture•
quality.
Option 2: Connect to video (CVBS)
jack
1 Connect a composite video cable to:
the• TV OUT jack on this product.
the video input jack on the TV.•
Tip
The video input jack on the TV may be labeled•
as A/V IN, VIDEO IN, COMPOSITE or
BASEBAND.
This type of connection provides standard
•
picture quality.
Pb
COMPONENT
VIDEO IN
Y
Pr
Pb
COMPONENT VIDEO OUT
YPr
VIDEO IN
3 Connect
Make the following connections to use this
product.
Basic connections:
Video•
Audio•
Optional connections:
Route audio to other devices:•
Digital amplifier/receiver•
Analog stereo system•
Note
Refer to the type plate at the back or bottom•
of the product for identification and supply
ratings.
Before you make or change any connections,•
ensure that all the devices are disconnected
from the power outlet.
Tip
Different types of connectors may be used to•
connect this product to your TV, depending on
availability and your needs. A comprehensive
interactive guide to help you connect your
product is available at www.connectivityguide.
philips.com.
Connect video cables
Connect this product to TV to view disc play.
Select the best video connection that TV can
support.
• Option 1: Connect to component video
jacks (for a standard TV or Progressive
Scan TV).
• Option 2: Connect to video (CVBS) jack
(for a standard TV).
Note
You must connect this product directly to a•
TV.
EN
EN.indd Sec1:8EN.indd Sec1:8 2009-7-29 11:27:422009-7-29 11:27:42

9
Connect analogue stereo system
1 Connect the audio cables to:
the• FRONT L/R jacks on this
product.
the audio input jacks on the device.•
Connect power
Caution
Risk of product damage! Ensure that the•
power supply voltage corresponds to the
voltage printed on the back of the unit.
Before connecting the AC power cord, ensure•
you have completed all other connections.
Note
The type plate is located on the back of the•
product.
1 Connect the AC power cable to the wall
socket.
The player is ready to be set up for»
use.
AUDIO IN
FRONT L
FRONT R
Connect audio cables
Connect the audio from this product to the
TV to allow sound output through the TV.
1 Connect the audio cables to:
the• FRONT L/R jacks on this
product.
the audio input jacks on the TV.•
Route audio to other devices
Route the audio from this product to other
devices to enhance audio play.
Connect to digital amplifier/receiver
1 Connect a coaxial cable (not supplied) to:
the• COAXIAL jack on this product.
the COAXIAL/DIGITAL input jack•
on the device.
AUDIO IN
DIGITAL IN
COAXIAL
DIGITAL
OUT
English
EN
EN.indd Sec1:9EN.indd Sec1:9 2009-7-29 11:27:432009-7-29 11:27:43

10
The language options may vary from•
different regions.
3 Press to select a language, then press
OK.
Turn on progressive scan
Note
To use the progressive scan feature, you•
must connect a progressive scan TV with the
component video jacks (see “Connect” >
“Connect video cables” > “Option 1: Connect
to the component video jacks” for details).
1 Turn on the TV to the correct viewing
channel for this product.
2 Press SETUP.
3 Press to select [Video Setup].
4 Select [Progressive] > [On], then press
OK.
Auto Standby
DivX(R) VOD Code
OSD Language
Disc Lock
Sleep Timer
General Setup
English
Melayu
Video Setup
Picture Setting
TV Display
TV System
Progressive
On
Off
4 Get started
Prepare the remote control
1 Open the battery compartment.
2 Insert two R03 or AAA batteries with
correct polarity (+/-) as indicated.
3 Close the battery compartment.
Caution
Remove batteries if they are exhausted or if•
the remote control is not to be used for a long
time.
Do not mix batteries (old and new or carbon•
and alkaline, etc.).
Batteries contain chemical substances, so they•
should be disposed of properly.
Find the correct viewing
channel
1 Press to turn on this product.
2 Turn on the TV and switch to the correct
video-in channel. (Refer to the TV user
manual on how to select the correct
channel.)
Select menu display language
1 Press SETUP.
»[General Setup] menu is displayed.
2 Select [OSD language], then press .
EN
EN.indd Sec1:10EN.indd Sec1:10 2009-7-29 11:27:432009-7-29 11:27:43

11
A warning message is displayed.»
5 To proceed, select [Ok] and press OK.
The progressive setup is complete.»
Note
If a blank/distorted screen is displayed, wait for•
15 seconds for the auto recovery.
If no picture is displayed, turn off the•
progressive scan mode as follows:
1) Press• to open the disc compartment.
2) Press the• Numeric button ‘1’.
6 Press SETUP to exit the menu.
7 You can now turn on the progressive
scan mode on the TV (see the TV user
manual).
Note
During play, when the progressive scan•
mode is on for both this product and the TV,
distorted picture may display. In this case, turn
off the progressive scan feature on both this
product and the TV.
English
EN
EN.indd Sec1:11EN.indd Sec1:11 2009-7-29 11:27:442009-7-29 11:27:44

12
Control video play
1 Play a title.
2 Use the remote control to control the
play.
Button Action
Start, pause or resume disc play.
Stop disc play.
, Skip to a previous/next title or
chapter.
, Search fast-backward or fast-
forward. Press repeatedly to
change the search speed.
, Search slow-forward or slow-
backward. Press repeatedly to
change the search speed.
For VCD/SVCD, slow-backward
search is not available.
AUDIO Select an audio language or
channel available on a disc.
SUBTITLE Select a subtitle language
availabel on a disc.
REPEAT Select or turn off repeat mode.
Repeat options may vary from
disc type.
ZOOM Fit the picture format to the TV
screen.
Press repeatedly until the image
is scaled to fit to the TV screen.
ZOOM Toggle between screen aspect
ratio and different zoom factor.
To pan through the zoomed
image, press the Navigation
buttons.
INFO Access the play options and
display the current disc status.
Access DVD menu
1 Press DISC MENU to access the disc
root menu.
2 Select a play option, then press OK.
In some menus, press the• Numeric
buttons to input your selection.
5 Play
Play a disc
Caution
Do not place any objects other than discs into•
the disc compartment.
Do not touch the disc optical lens inside the•
disc compartment.
1 Press to open the disc compartment.
2 Insert a disc with its label facing up.
3 Press to close the disc compartment
and start disc play.
To view disc play, turn on the TV to•
the correct viewing channel for this
product.
To stop disc play, press• .
Note
Check the types of discs supported (see•
“Specifications” > “Play media”).
If the password entry menu is displayed, enter•
the password before you can play the locked
or restricted disc (see “Adjust settings” >
“Preferences” > [Parental Control]).
If you pause or stop a disc, the screen saver•
appears after 5 minutes of inactivity. To
deactivate the screen saver, press DISC
MENU.
After you pause or stop a disc and no button•
is pressed within 15 minutes, this product
automatically switches to standby.
Play video
Note
Some operations may not work with some•
discs. See the information accompanying the
disc for details.
EN
EN.indd Sec1:12EN.indd Sec1:12 2009-7-29 11:27:452009-7-29 11:27:45

13
• [Track Time] (track time)
3 Press the Numeric buttons to enter the
time to skip to, then press OK.
Display play time
1 During play, press INFO.
The disc status menu is displayed.»
2 Select [Time Disp.], then press .
The display options vary from disc»
type.
3 Select an option, then press OK.
View DVD play from different angles
1 During play, press INFO.
The disc status menu is displayed.»
2 Select [Angle], then press .
3 Press the Numeric buttons to change the
angle.
Play changes to the selected angle.»
Note
Applicable only to discs contain multi-angle•
scenes.
Repeat play a specific section
1 During play, press REPEAT A-B at the
start point.
2 Press REPEAT A-B again to set the end
point.
Repeat play starts.»
3 To cancel repeat play, press REPEAT A-B
again.
Note
The marked section for repeat play is only•
possible within a track/title.
Access VCD menu
The PBC (playback control) feature is available
for VCD/SVCD, which can display the
contents menu for you to select a play option.
The PBC is on by default in the factory.
Note
See “Adjust settings” >• [Preferences] > [PBC]
on how to turn PBC on or off.
1 Display the contents menu via one of the
following ways:
If PBC is on, load in a VCD/SVCD.•
During play with PBC on, press•
BACK.
2 Press the Numeric buttons to select a
play option, then press OK to start play.
If PBC is turned off, it skips the menu•
display and starts play from the first
track.
Preview disc contents
1 During play, press INFO.
The disc status menu is displayed.»
2 Select [Preview], then press .
3 Select a preview option, then press OK.
A thumbnails preview screen is»
displayed.
To go to the next/previous prview•
screen, select [Prev] or [Next], then
press OK.
To start play, press• OK at the
selected thumbnail picture.
Skip play to a specific time
1 During play, press INFO.
The disc status menu is displayed.»
2 Select an option for the current elapsed
playing time, then press .
• [TT Time] (title time)
• [CH Time] (chapter time)
• [Disc Time] (disc time)
English
EN
EN.indd Sec1:13EN.indd Sec1:13 2009-7-29 11:27:462009-7-29 11:27:46

14
Button Action
REPEAT Select or turn off repeat
mode.
Repeat options may vary
from disc type.
Quick skip play
1 During play, press INFO repeatedly to
select an option.
Display Action
[Disc Go To] Skip play to a
specific time within
the disc.
[Track Go To] Skip play to a
specific time within
a track.
[Select Track] Skip play to a
specific track
number.
2 Press the numeric buttons to change the
time/number to skip to.
Play MP3/WMA music
MP3/WMA is a type of highly compressed
audio file (files with .mp3, .wma extensions).
1 Insert a disc that contains the MP3/WMA
music.
A contents menu is displayed.»
2 If play does not automatically start, select
a track to play.
To select another track/folder, press•
, then press OK.
Play DivX® video
DivX video is a digital media format that
retains high quality despite a high rate of
compression. You can enjoy DivX video on
this DivX certified product.
1 Insert a disc that contains the DivX
videos.
A contents menu is displayed.»
2 Select a title to play, then press OK.
You may select subtitle/audio•
language.
Note
You can only play DivX videos that were•
rented or purchased with the DivX
registration code of this player (see “Adjust
Settings” - [General Setup] > [DivX® VOD
Code]).
Play music
Control a track
1 Play a track.
2 Use the remote control to control the
play.
Button Action
Start, pause or resume
disc play.
Stop disc play.
, Skip to a previous/next
track.
Select an item to play.
, Searches fast-backward
or fast-forward. Press
repeatedly to change the
search speed.
EN
EN.indd Sec1:14EN.indd Sec1:14 2009-7-29 11:27:462009-7-29 11:27:46

15
Note
It may require longer time to display the disc•
content on the TV due to the large number of
songs/photos compiled onto one disc.
If the JPEG photo is not recorded with an ‘exif’•
type file, the actual thumbnail picture cannot
be shown on the screen. It is replaced by a
‘blue mountain’ thumbnail picture.
This player can only display digital camera
•
pictures according to the JPEG-EXIF format,
typically used by almost all digital cameras.
It cannot display Motion JPEG, or pictures
in formats other than JPEG, or sound clips
associated with pictures.
Folders/files that exceed the supported limit of•
this player cannot be displayed or played.
Control photo play
1 Play a photo slideshow.
2 Use the remote control to control the
play.
Button Action
/ Rotate a photo anti-
clockwise/clockwise.
/ Rotate a photo horizontally/
vertically.
ZOOM Zoom in or out of a photo.
Play pauses in zoom mode.
Stop a play.
Play musical slideshow
Create a musical slideshow to play MP3/
WMA music files and JPEG photo files
simultaneously.
Note
To create a musical slideshow, the MP3/WMA•
and JPEG files must be stored on the same
disc.
1 Play MP3/WMA music.
2 Press BACK to return to the main
menu.
Note
For disc recorded in multiple sessions, only the•
first session is played.
For a WMA file that is protected by Digital•
Rights Management (DRM), it cannot be
played on this product.
This product does not support MP3PRO audio
•
format.
For any special character that is present in•
the MP3 track name (ID3) or album name, it
might not be displayed correctly on the screen
because these characters are not supported.
Folders/files that exceed the supported limit of•
this product cannot be displayed or played.
Play photo
Play photo as slideshow
You can play JPEG photos (files with .jpeg or
.jpg extensions).
1 Insert a disc that contains the JPEG
photos.
Slideshow begins (for Kodak disc), or»
a contents menu (for JPEG disc) is
displayed.
2 Select a photo folder, then press OK to
start slideshow.
To preview the photos in thumbnail,•
press INFO.
To select a photo, press the•
Navigation buttons.
To enlarge the selected photo and•
start slideshow, press OK.
To return to the menu, press•
BACK.
English
EN
EN.indd Sec1:15EN.indd Sec1:15 2009-7-29 11:27:472009-7-29 11:27:47

16
3 Navigate to the photo folder/album and
press OK to start slideshow play.
Slideshow begins and continues till the»
end of the photo folder or album.
Audio continues to play until the end»
of the disc.
To stop slideshow play, press• .
To stop music play, press• again.
EN
EN.indd Sec1:16EN.indd Sec1:16 2009-7-29 11:27:482009-7-29 11:27:48

17
[OSD language]
Select an on-screen menu language.
[Sleep Timer]
Switch automatically to standby at the preset
time.
• [Off] - Disable sleep mode.
• [15 mins], [30 mins], [45 mins], [60
mins] -Select the count down time
for this product to switch to standby.
[Auto standby]
Turn on or off automatically standby.
• [On] - Switch to standby 15 minutes
of inactivity (for example, in pause or
stop mode).
• [Off] - Disable the auto standby
mode.
[DivX(R) VOD Code]
Display the DivX® registration code.
Tip
Use this player’s DivX registration code•
when you rent or purchase video from www.
divx.com/vod. The DivX videos rented or
purchased through the DivX® VOD (Video
On Demand) service can be played only on
the device to which it is registered.
Audio setup
1 Press SETUP.
»[General Setup] menu is displayed.
2 Press to select [Audio Setup], then
press .
3 Select an option, then press OK.
4 Select a setting, then press OK.
6 Adjust settings
Note
If the setup option is grayed out, it means the•
setting cannot be changed at the current state.
General setup
1 Press SETUP.
»[General Setup] menu is displayed.
2 Press .
3 Select an option, then press OK.
4 Select a setting, then press OK.
To return to the previous menu,•
press .
To exit the menu, press• SETUP.
[Disc Lock]
Set play restriction for a disc which is loaded
in the disc compartment (maximum 20 discs
can be locked).
• [Lock] - Restrict access to the
current disc. The next time you want
to play this disc or unlock it, you
need to enter the password.
• [Unlock] - Play all discs.
Tip
You can set or change the password, go to•
[Preferences] > [Password].
English
EN
EN.indd Sec1:17EN.indd Sec1:17 2009-7-29 11:27:482009-7-29 11:27:48

18
• [3D] - Select a virtual surround sound
effect that is produced from the left and
right audio channels.
• [Movie Mode] - Select a sound effect for
movies.
• [Music Mode] - Select a sound effect for
music.
[Night Mode]
Make loud sound level softer and soft sound
level louder so that you can watch the DVD
movies at a low volume, without disturbing
others.
• [On] – Enjoy quiet viewing at night.
• [Off] – Enjoy surround sound with a full
dynamic range.
Note
Applicable only to Dolby Digital encoded•
DVD.
Video setup
1 Press SETUP.
»[General Setup] menu is displayed.
2 Press to select [Video Setup], then
press .
3 Select an option, then press OK.
4 Select a setting, then press OK.
To return to the previous menu,•
press .
To exit the menu, press• SETUP.
To return to the previous menu,•
press .
To exit the menu, press• SETUP.
[Analogue Output]
Select an analogue setting based on the audio
device that is connected through the analogue
audio jack.
• [Stereo] - For stereo output.
• [LT/RT] - For surround sound output
through two speakers.
[Digital Audio]
Select a digital setting based on the digital
amplifier/receiver that is connected through
the digital jack (coaxial/digital).
• [Digital Output] - Select a type of digital
output.
• [Off] - Disable digital output.
• [All] - Support multi-channel audio
formats.
• [PCM Only] - Downmix to two-
channel audio format.
• [LPCM Output] - Select the LPCM
(Linear Pulse Code Modulation) output
sampling rate.
• [48kHz] - For discs recorded at
sampling rate of 48 kHz.
• [96kHz] - For discs recorded at
sampling rate of 96 kHz.
Note
• [LPCM Output] setting is only available if the
[Digital Output] is set to [PCM Only].
The higher the sampling rate, the better the•
sound quality.
[Volume]
Set the default volume level when you play a
disc.
1. Press OK.
2. Press to set the volume.
3. Press OK to confirm and exit.
[Sound Mode]
Select a preset sound effect to enhance the
audio output.
EN
EN.indd Sec1:18EN.indd Sec1:18 2009-7-29 11:27:492009-7-29 11:27:49

19
Preferences
Note
Stop disc play before you can access to•
[Preferences].
1 Press SETUP.
»[General Setup] menu is displayed.
2 Press to select [Preferences], then
press .
3 Select an option, then press OK.
4 Select a setting, then press OK.
To return to the previous menu,•
press .
To exit the menu, press• SETUP.
[Audio]
Select an audio language for disc play.
[Subtitle]
Select a subtitle language for disc play.
[Disc Menu]
Select a disc menu language.
Note
If the language you have set is not available on•
the disc, the disc uses its own default language.
For some DVDs, the subtitle/audio language•
can only change from the disc menu.
To select the languages that are not listed in•
the menu, select [Others]. Then check the
Language Code list at the back of this user
manual and enter the respective language
code.
Preferences
Audio
Subtitle
Disc Menu
Parental Control
PBC
Mp3 / Jpeg Nav
Password
DivX Subtitle
[TV System]
Change this setting if the video does not
appear correctly. By default, this setting
matches the most common setting for TVs in
your country.
• [PAL] - For PAL-system TV.
• [Multi] - For TV that is compatible with
both PAL and NTSC.
• [NTSC] - For NTSC-system TV.
[TV Display]
Select a display format:
• [4:3 Pan Scan] - For 4:3 screen TV: full-
height display with the trimmed sides.
• [4:3 Letter Box] - For 4:3 screen TV:
wide-screen display with black bars on
the top and bottom of the screen.
• [16:9] - For wide-screen TV: display ratio
16:9.
[Progressive]
If a progressive scan TV is connected to this
product, turn on the progressive scan mode.
• [On] - Turn on progressive scan.
• [Off] - Turn off progressive scan mode.
Note
For more detailed description, see “Get•
started” > “Turn on progressive scan”.
[Picture Setting]
Select a predefined set of picture color
settings or customize the personal setting.
• [Standard] - Original color setting.
• [Bright] - Vibrant color setting.
• [Soft] - Warm color setting.
• [Personal] - Customize the color setting.
Set the level of brightness, contrast, tint
and color saturation, then press OK.
English
EN
EN.indd Sec1:19EN.indd Sec1:19 2009-7-29 11:27:492009-7-29 11:27:49

20
Note
If you forget the password, enter ‘136900’•
before you set a new password.
[DivX Subtitle]
Select a character set that supports the DivX
subtitle.
• [Standard] – English, Irish, Danish,
Estonian, Finnish, French, German, Italian,
Portuguese, Luxembourgish, Norwegian
(Bokmål and Nynorsk), Spanish, Swedish,
Tur kish
• [Central Europe] – Polish, Czech, Slovak,
Albanian, Hungarian, Slovene, Croatian,
Serbian (Latin script), Romanian
• [Cyrillic] – Belarusian, Bulgarian,
Ukrainian, Macedonian, Russian, Serbian
Note
Ensure that the subtitle file has the exact same•
file name as the movie file. If for example the
file name of the movie is ‘Movie.avi’, then
you need to name the text file ‘Movie.sub’ or
‘Movie.srt’.
[Version Info]
Display the software version of this product.
Tip
This information is required when you want•
to find out if a newest software version is
available at the Philips website that you may
download and install on this product.
[Default]
Reset all the settings of this product to factory
default, except for [Disc Lock], [Parental
control] and [Password] settings.
[Parental control]
Restrict access to discs that are unsuitable
for children. These types of discs must be
recorded with ratings.
1. Press OK.
2. Select a rating level, then press OK.
3. Press the numeric buttons to enter the
password.
Note
Rated DVDs above the level you set in•
[Parental control] require a password to be
played.
The ratings are country-dependent. To allow•
all discs to play, select ‘8’.
Some discs have ratings printed on them but•
are not recorded with ratings. This function
has no effect on such discs.
[PBC]
Turn on or off the content menu of VCDs/
SVCDs with PBC (playback control) feature.
• [On] - Display the index menu when you
load a disc for play.
• [Off] - Skip the menu and start play from
the first title.
[MP3/JPEG Nav]
Select to display the folders or display all the
files.
• [View Files] - Display all the files.
• [View Folders] - Display the folders of
MP3/WMA files.
[Password]
Set or change the password for locked discs
and play restricted DVDs.
1. Press the Numeric buttons to enter
‘136900’ or the last set password at [Old
Password] field.
2. Enter the new password at [New
Password] field.
3. Enter the new password again at [Confirm
PWD] field.
4. Press OK to exit the menu.
EN
EN.indd Sec1:20EN.indd Sec1:20 2009-7-29 11:27:502009-7-29 11:27:50

21
Video format
Digital compression:•
DVD/SVCD/VCD/DivX•
Horizontal resolution:•
DVD: 720 pixels (50 Hz); 720 pixels•
(60 Hz)
VCD: 352 pixels (50 Hz); 352 pixels•
(60 Hz)
Ver tical resolution:•
DVD: 576 pixels (50 Hz); 480 pixels•
(60 Hz)
VCD: 288 lines (50 Hz); 240 lines•
(60 Hz)
Audio performance
DA converter: 24 bits, 192 kHz•
Frequency response:•
DVD: 4 Hz - 22 kHz (48 kHz); 4 Hz -•
44 kHz (96 kHz)
SVCD: 4 Hz - 20 kHz (44.1 kHz); 4•
Hz - 22 kHz (48 kHz)
CD/VCD: 4 Hz - 20 kHz (44.1 kHz)•
Signal-Noise (1 kHz): > 90 dB•
(A-weighted)
Dynamic range (1 kHz): > 80 dB•
(A-weighted)
Crosstalk (1 kHz): > 90 dB•
Distortion/noise (1 kHz): > 65 dB•
MP3: MPEG L3•
Audio format
Digital:•
MPEG/AC-3: Compressed digital (16,•
20, 24 bits, fs 44.1, 48, 96 kHz)
MP3: 96, 112, 128, 256 kbps &•
variable bit rate, fs 32, 44.1, 48 kHz
Analog sound stereo•
Dolby surround compatible downmix•
from Dolby Digital multi-channel sound
Connections
Y Pb Pr output: Cinch 3x•
Video output: Cinch (yellow)•
Audio output (L+R): Cinch (white/red)•
Digital output:•
1 coaxial: IEC60958 for CDDA/•
LPCM; IEC61937 for MPEG 1/2,
Dolby Digital
7 Additional
information
Care
Caution
Never use solvents such as benzene, thinner,•
cleaners available commercially, or anti-static
sprays intended for discs.
Clean discs
Wipe the disc with a micro fibre cleaning cloth
from the centre to the edge in a straight line
movement.
Specifications
Note
Specification and design are subject to change•
without notice
Accessories supplied
Remote control and batteries•
Audio/Video cables•
User Manual•
Play media
DVD-Video, Video CD/SVCD, Audio CD,•
CD-R/CD-RW, DVD+R/+RW, DVD-
R/-RW, DivX-CD, Picture CD, MP3-CD,
WMA-CD
TV standard
Number of lines:•
625 (PAL/50Hz); 525 (NTSC/60Hz)•
Play: Multi-standard (PAL/NTSC)•
Video performance
Video DAC: 12 bits, 108 MHz•
Y Pb Pr: 0.7 Vpp ~ 75 ohm•
Video output: 1 Vpp ~ 75 ohm•
English
EN
EN.indd Sec1:21EN.indd Sec1:21 2009-7-29 11:27:502009-7-29 11:27:50