Philips DVP5996K/96 User manual

DVP5996K
DVD Video Player
Quick Start Guide
What’s in the box?
DVD Video Player
Remote Control
and 2 AAA batteries
User
Manual Composite
Audio/Video Cables
Basic Audio/Video Connections
VIDEO IN
(CVBS)
Audio and Video 
Power
HDMI IN
VIDEO IN
(CVBS)
V (Pr/Cr)
U (Pb/Cb)
Y
COMPONENT
VIDEO IN
OR
Component Video
(Better Quality)
HDMI
(Best Quality)
OR
Composite Video CVBS
(Good Quality)
(Cable not supplied)
VIDEO IN
(CVBS)
TV (back)
Video 
Power Audio 
DVD Player (back)
TV (back)
Audio and Video 
Power
(Cable not supplied)
DVD Player (back)
TV (back)
DVD Player (back)
1Connect
Power Cable (for Asia Pacic only)
dvp5996k_96_98_qsg_eng.indd 1 2008-02-27 10:16:01 AM

3Enjoy 2Set up
A
Finding the viewing channel
APress 1on this unit to turn it on.
BTurn on the TV. Use the TVs remote control to
select the correct viewing channel.
Note To search for the correct viewing channel,
press the Channel Down button on the TVs remote
control repeatedly (or AV, SELECT, °button) until
you see the Video In channel.
B
Select the display language on the
screen
APress SETUP.
The { General Setup Page } appears.
Disc Lock
OSD Language Auto (ENG)
Sleep ENGLISH
Lip Sync
Volume
Auto Standby
DivX(R) VOD Code
General Setup Page
Melayu
BUse  keys to select { OSD Language } and press
.
CUse  keys to select a language and press OK to
confirm. (For Philips ‘EasyLink’ TV, { Auto } must be
selected.)
DPress SETUP to exit.
Note The language set here is only for the menus
that are shown on the TV while operating this unit, not
for the DVD disc menu.
There are various setup options (Audio Setup, Video Setup,
Preference) available on this unit. Refer to the user manual
for more information.
A
Start disc playback
APlayback may start automatically when a disc has
been loaded in the disc tray.
Note If a disc menu appears on the TV, use
 keys to navigate in the DVD menu.
BPress uto start playback.
CTo stop playback, press n.
Troubleshooting
For more troubleshooting tips,
see the user manual.
No power
• Check if the AC power cord is properly connected.
• Press 1on the front panel of this unit to turn on the
power.
No picture
• Check connection to TV and ensure the plugs are
rmly in place.
No sound or distorted sound
• Check audio connections and make sure that the
connected audio device is turned on.
• For HDMI connection, check if your TVs HDMI or
Digital setting is set to ON. Contact your TV
manufacturer for detailed information.
Remote control does not work
• Check the batteries are loaded correctly or replace
the batteries with new ones.
• Reduce the distance between the remote control
and this unit.
• Point the remote control directly toward the IR
sensor.
Need help?
User Manual
See the user manual that came with your Philips DVD Player.
Online
Register your product and get support at www.philips.com/welcome.
2008 © Koninklijke Philips N.V.
All rights reserved.
www.philips.com
sgptt-0809/96_98_03
dvp5996k_96_98_qsg_eng.indd 2 2008-02-27 10:16:03 AM