Philips DVDR80/051 User manual

Quick install guide
Connecting your DVD recorder to the TV
set /Initial installation
arning ! As long as the initial installation has not been carried out, the buttons on
the front of the DVD recorder remain without function.
1Remove the aerial cable plug from your TV set. Insert it into the
ANTENNA IN socket at the back of the DVD recorder
2Insert one end of the supplied aerial cable into the TV OUT socket at
the back of the DVD recorder and the other end into the aerial input
socket of the TV set.
3Connect socket EXT 1 TO TV-I/O or sockets OUT S-VIDEO
(Y/C) ,VIDEO (CVBS) OUT ,OUT AUDIO L/R with the
corresponding input sockets of your TV set.
My TV sets supports the functions Easy Link, Cinema Link,
NexTView Link, Qlink, Smart Link, Megalogic, Datalogic,...
Connect the scart socket EXT 1 TO TV-I/O at the back of the DVD
recorder with the - suitable for data transfer - scart socket of your TV set
(see the instruction manual of your TV set) using a special cable (suitable for
these data transfers). ?
4Switch on the TV set.
5Use the supplied mains cable to connect the mains socket
4MAINS at the back of the DVD recorder with the wall outlet.
The most important features of the DVD recorder will appear in
scrolling text on the display. After the first installation is completed
this function will be switched off.
IS TV ON? 6Switch on the DVD recorder using STANDBY-ON m.
'IS TV ON?' will appear on the display.
7If necessary, select the programme number for the input socket at the
TV set.
Virgin mode
Menu Language
English
Español
Français
Italiano
Deutsch
Press OK to continue
8The initial installation menu appears on the screen.
9Select your favourite setting using P- Bor P+ A.
Confirm with OK .
The initial installation is carried out automatically. Wait until the whole procedure is complete.
Further settings relate to the GUIDE Plus+®system. This offers a free interactive guide to the
TV programmes available in your area.
To install this system, please read in the user manual the section entitled 'The GUIDE Plus+®
System'.
How to install an external receiver, read in the user manual the sections entitled
'Connecting additional devices' and 'Setting up the GUIDE Plus+®system'.
ENGLISH

How to make a recording
1Press MONITOR to view the currently selected input signal on the
screen.
2Select the programme number from which to record using P+ Aor
P- B.
Recording via external sockets
Using P+ Aor P- B, select the front sockets ('CAM1', 'CAM2') or the
sockets ('EXT1', 'EXT2') at the back of the DVD recorder, from which you
wish to record.
Selecting the recording mode (quality)
Using REC MODE , you can choose between 'M1' (camcorder recordings/1
hour), 'M2' (2 hours), 'M2x' (2,5 hours), 'M3' (3 hours) or 'M4' (4 hours) ,
'M6' (6 hours) or 'M8' (8 hours).
SAFERECORD
Normally, a recording always begins at the position where the previous
recording ended. All subsequent recordings will be erased.
If you want the new recordig to be made at the end of all the other
recordings, hold down REC/OTR nuntil 'SAFE REC' appears on the display. Tip
3Press RECORD or REC/OTR nto start the recording.
a'NO SIGNAL' (no signal) will appear on the display
bCheck whether the cable connectors are properly inserted.
bIf the recording is to be made from a video recorder, change the 'tracking'
setting on the video recorder.
bIn case of bad or non-standard video input signals, the DVD recorder may
be unable to detect the signal. Problem
How to program a recording
Attention!
Programmed recordings will not work, until the installation of the GUIDE Plus®system is
complete.
1Switch on the TV set. If required, select the programme number for
the DVD recorder.
VIDEO Plus+ Manual Home
Schedule displa s programmes for Watch or Record.
Press Bto use. Press the Red button for VIDEO Plus+
recording. Press the Green button for Manual
recording. Press Dfor Search. Press Cfor Info.
Grid Search Schedule Info
No programmes
2Press TIMER son the remote control and then press the green
function button to set a manual timer.
3Enter the data of the recording using the number buttons 0..9 ,or
P- B,P+ A,D,C. Confirm the entry with OK .
4Complete the programming by confirming the TV channel (programme
number).
5To end, press TIMER s.
6Switch off the DVD recorder using STANDBY m.
A programmed recording functions only if the DVD recorder has been
switched off using STANDBY m.
ENGLISH
3103 605 20681 3312/000 (WwnnNNNwwnnwWNnwNwnNnNWwnWnnwN) DVDR 80/051