Philips DVDR3576H/37B User manual

33
USB
HDD & DVD Player / Recorder
with Digital Tuner
DVDR3576H/37
Quick Start Guide
What’s in the box?
HDD & DVD Player / Recorder with Digital Tuner
Remote Control
with Batteries
(AAAx2)
Enjoy Enjoy
Start Playback
A
Direct Playback
If you are playing back the titles in HDD, press
HDD rst, then proceed to step 2.
If you are playing back the titles in DVD, press
DVD rst.
❶Insert a disc.
❷Press PLAY to start playback.
❸Press STOP once to stop playback
temporarily.
B
Playback from the Title List
If you are playing back the titles in HDD, press
HDD rst, then proceed to step 2.
If you are playing back the titles in DVD, press
DVD rst.
❶Insert a disc.
❷For HDD, press TITLE to call up the title list.
For DVD, the title list will automatically appear
when you insert a disc. Otherwise, press TITLE
or DISC MENU .
❸Use K/ L/ s/ Bto select a desired title, then
press OK .
❹Use K/ Lto select “Play” (for DVD), or select
“Resume Playback” or “Play from Start” (for
HDD), then press OK .
❺Press STOP once to stop playback
temporarily.
C
Variable Skip / Variable Replay
During playback, you can skip forward or backward by
the amount of time you set in the “Playback” menu.
To assign SKIP or REPLAY to skip or
rewind by a certain amount of time;
❶Press SETUP and use K/ Lto select
“General Setting”, then press OK .
❷Use K/ Lto select “Playback”, then press OK .
❸Use K/ Lto select “Variable Skip / Replay”, then
press OK .
❹Use K/ Lto select a desired item, then press
OK .

Variable Skip
Variable Replay
A
B
❺Use K/ Lto select the desired amount of time,
then press OK .
To actually use this function during playback;
During playback, press SKIP if you want to skip
forward. Press REPLAY if you want to skip
backward.
2007 © Philips Consumer Electronics
A Division of Philips Electronics North America Corp
Marietta, GA 30006 0026
All rights reserved.
Printed in China
E2H42UD
1VMN25022 *****
RCA Audio / Video Cables
RF Coaxial Cable
User Manual
User Manual
Quick Start Guide
1Connections
Basic Setup
Enjoy
2
3
Types of Media Used on This
Recorder
*DVD-RW/-R recorded in VR mode or non
compatible recording format are not playable.
*DVD-RW recorded in the mode other than +VR is
not recordable on this unit unless you erase all
contents in the disc (refer to page 62 in the User
Manual).
*DVD-R recorded in the mode other than +VR is
not recordable on this unit.
Type Playback Record Edit
HDD
DVD+RW
DVD+R
DVD-
RW
DVD-R
DVD+R
Double
Layer
DVD-
video
CD-DA
(audio
CD)
video CD
USB
device
D
Time Shift Playback (HDD only)
You can play back a title being recorded from the
beginning while recording continues.
❶During HDD recording, press PLAY .
Playback of the title you are recording will start
from the beginning.

Elapsed playback time will be displayed in the front
panel display.
❷To stop the playback, press STOP once.

The front panel display will switch back to show
the elapsed recording time.

If you press STOP twice, it will stop the
recording.
E
Playing Back a USB Device with
MP3 / Windows Media™ Audio /
JPEG Files
❶Press SOURCE / USB repeatedly to select
the appropriate external input channel for USB
device.
❷Plug in your USB device.
USB
front of this unit
USB
USB memory
or
USB card reader
If USB memory is connected;
- file list will appear.
If USB card reader is connected;
- drive selection screen will appear.
Select the desired drive, then press OK or B.
- file list will appear.
• To exit the file list, press STOP .
• To resume the file list, press TITLE .
❸Use K/ Lto select a desired folder or track / file,
then press OK .
When selecting track / file:
Playback will start.
When selecting the folder:
The files in the folder will appear.
Use K/ Lto select the file or folder you want to
play back, then press OK .
Editing
A
Deleting a Title
If you are editing the titles on HDD, press HDD
rst.
If you are editing the titles on DVD, press DVD
rst.
❶Press TITLE .
❷Use K/ L/ s/ Bto select a desired title to
delete, then press OK .
If you are editing the titles on HDD, proceed to
step 4.
If you are editing the titles on DVD, proceed to
step 3.
❸Use K/ Lto select “Edit”, then press OK .
❹Use K/ Lto select “Title Delete”, then press
OK .
Confirmation message will appear.
Select “Yes”, then press OK .
Final confirmation message will appear.
Select “Yes”, then press OK .
B
Deleting Selected Titles
(HDD only)
❶Press
HDD , then press TITLE .
❷Use K/ L/ s/ Bto select any title, then press
OK .
❸Use K/ Lto select “Delete Multiple Titles”, then
press OK .
❹Use K/ L/ s/ Bto select the title you want to
delete, then press OK .
❺Repeat step 4 until you select all the titles you
want to delete.
❻Press CLEAR .
Confirmation message will appear.
Select “Yes”, then press OK .
Final confirmation message will appear.
Select “Yes”, then OK .
Need help?
User Manual
See the user manual that came with your Philips recorder.
Online
Go to www.philips.com/welcome.
Hotline
Call 1-888-PHILIPS (1-888-744-5477) for our operators.
E2H42UD_DVDR3576H-37_QG_EN.indd 1E2H42UD_DVDR3576H-37_QG_EN.indd 1 2008/01/05 19:39:142008/01/05 19:39:14

B
Pause Live TV (HDD only)
(cont’d)
❶When you leave the TV, press PAUSE LIVE TV
twice.
With the first press, the unit will start recording
the TV broadcast.
With the second press, the unit will be in the pause
mode as soon as it starts the time shift playback.
❷When you come back, press
PAUSE LIVE TV again.
❸Press STOP once to resume live TV.
Press STOP twice to stop pause live TV
mode.
You can also use the special playback functions
such as REW , FFW etc. during pause
live TV mode.
3
Start Dubbing
Preparing for dubbing (HDD to DVD):
Insert a recordable DVD.
Preparing for dubbing (DVD to HDD):
Insert a disc to be dubbed.
❶Press SETUP in stop mode.
❷Use K/ Lto select “Dubbing”, then press OK .
❸Use K/ Lto select a desired dubbing direction,
then press OK .
❹Use K/ Lto select “Add”, then press OK .
HDD DVD
1/1
3000 MB
Dubbing List
Add
Delete All
Start Dubbing
❺Use K/ L/ s/ Bto select a desired title, then
press OK .
The title is now registered in the dubbing list.
❻Repeat steps 4 to 5 until you register all the titles
to be dubbed.
❼After adding all the titles you want, use K/ Lto
select “Dubbing Start” in the dubbing menu, then
press OK .
❽Use s/ Bto select a desired recording mode,
then press OK .
Confirmation message will appear.
❾Use K/ Lto select “Yes”, then press OK .
❿To stop the dubbing in progress:
Press STOP on the front panel.
Enjoy
Inserting Discs
❶Press OPEN/CLOSE to open the disc tray.
❷Place the disc on the disc tray with its label side
facing up.
Align the disc to the disc
tray guide.
❸Press OPEN/CLOSE to close the disc tray.
Start Recording
ARecording from the TV
If you are recording to the HDD, press HDD
rst, then proceed to step 2.
If you are recording to a disc, press DVD rst.
❶Insert a recordable disc (make sure the disc is
compatible with this unit).
❷Press REC MODE to select a recording
mode.
❸Select the appropriate external input channel by
pressing SOURCE / USB or CH / .
To record a TV programme:
Press DTV/TV to select analog TV or digital
TV, then use CH / or the Number
buttons to select a desired channel to record.
❹Press REC to start recording.
Press REC again to make recording for 30
minutes. Press REC repeatedly to extend the
recording time by 30 minutes for each press.
❺Press STOP to stop the recording.
B
Pause Live TV (HDD only)
With PAUSE LIVE TV , even if you leave your
couch while you are watching TV through this unit,
you can come back and watch the rest of the program
from right where you left at any convenient time with
just one touch of a button.
1Connections
Start with the “Basic Connection”.
Your Philips recorder is now ready for use!
Basic Connection
A
Before Connecting
❶Disconnect the power cords of the devices from
the AC outlet.
❷Disconnect RF coaxial cable from antenna input
jack of your TV.
BConnecting
Make the connections as illustrated below.
IN
OUT
OUT
VIDEO
OUT
Y
P R /C R
P B /C B
R
L
R
L
VIDEO
IN
S-VIDEO S-VIDEOANTENNA
COAXIAL OPTICAL
AVIN AVOUT
COMPONENT
VIDEOOUTPUT
DIGITALAUDIOOUTPUT
PCM/BITSTREAM
IN
HDMIOUT
AUDIO IN
RL
VIDEO IN
IN
OUT
OUT
VIDEO
OUT
Y
P R /C R
P B /C B
R
L
R
L
VIDEO
IN
S-VIDEO S-VIDEOANTENNA
AV IN AV OUT
COMPONENT
VIDEOOUTPUT
IN
ANT.IN
rear of this unit
rear of your TV
to the
AC outlet
1
23
4
from
antenna
or cable TV
RF coaxial
cable
RF coaxial
cable RCA
video cable RCA audio cable
❶Connect the RF coaxial cable from the TV
antenna or cable TV to the ANTENNA IN jack of
this unit.
❷Use RF coaxial cable to connect ANTENNA
OUT jack of this unit to the antenna input jack of
your TV.
AND
❸Use RCA audio / video cables to connect the AV
OUT jacks of this unit to the audio / video input
jacks of your TV.
❹Plug in the power cords of the devices to the AC
outlet.
RF Modulator Connection
If your TV has antenna in jack only, it is still
possible to connect this unit to your TV by using a
commercially available stereo audio / video RF
modulator. In this case, follow the instructions below.
A
Before Connecting
❶Disconnect the power cords of the devices from
the AC outlet.
❷Disconnect RF coaxial cable from antenna input
jack of your TV.
B
Connecting
Make the connections as illustrated below.
AUDIOIN VIDEOIN
LR
ANT.INANT.OUT
43
IN
OUT
OUT
VIDEO
OUT
Y
P R /C R
P B /C B
R
L
R
L
VIDEO
IN
S-VIDEO S-VIDEOANTENNA
COAXIAL OPTICAL
AVIN AVOUT
COMPONENT
VIDEOOUTPUT
DIGITALAUDIOOUTPUT
PCM/BITSTREAM
IN
HDMIOUT
ANT.IN
AUDIO IN VIDEO IN
LR
ANT.INANT.OUT
43
IN
OUT
OUT
VIDEO
OUT
Y
P R /C R
P B /C B
R
L
R
L
VIDEO
IN
S-VIDEO S-VIDEOANTENNA
AV IN AVOUT
COMPONENT
VIDEOOUTPUT
IN
rear of your TV
from antenna
or cable TV
rear of your RF
modulator
rear of this unit
RF coaxial cable
RCA audio
cable
RCA video
cable
1
2
3
4
5
RF coaxial cable
RF coaxial
cable
❶Connect the RF coaxial cable from the TV
antenna or cable TV to the ANTENNA IN jack of
this unit.
❷Use RF coaxial cable to connect ANTENNA
OUT jack of this unit to the antenna input jack of
your RF modulator.
❸Use RF coaxial cable to connect antenna output
jack of your RF modulator to the antenna input
jack of your TV.
❹Use RCA audio / video cables to connect the AV
OUT jacks of this unit to the audio / video input
jacks of your RF modulator.
❺Plug in the power cords of the devices to the AC
outlet.
*RF modulator is not supplied with this unit. You
need to purchase it at your local store.
Basic Setup
2
A
Finding the Viewing Channel
❶Press STANDBY-ON to turn on the unit.
❷Turn on your TV.

If connected to your VCR, make sure it is
switched off or in standby mode before
proceeding.
❸Press “2” on the TV’s remote control, then press
channel down button repeatedly until you see the
“Initial Setup” menu. This is the correct viewing
channel (external input channel) for the recorder.
OSD Language
English
Français
Español
*
Refer to your TV’s user manual for
details.
B
Initial Setting
❶ Use K/ Lto select your desired language, then
press OK .
❷ Use K/ Lto select the type of broadcasting
signal, then press OK .
Channel Preset
Make sure the antenna is
connected to “ANTENNA IN”jack.
Antenna
Cable (Analog)
Cable (Analog / Digital)
The unit will start getting channels available in
your area.
Antenna:
(When using antenna)
The channels broadcasted in analog TV and digital
TV are automatically scanned and memorized.
Only the receivable channels in the area will be
memorized.
Cable (Analog):
(When using basic cable)
The channels broadcasted in analog CATV are
automatically scanned and memorized.
Cable (Analog / Digital):
(When using basic cable)
The channels broadcasted in analog CATV and
digital CATV are automatically scanned and
memorized.
Entry screen for the clock setting will appear.
❸ Use {/ Bto select an item to set, and use
K/ Lto select the contents to suit your
preference, then press OK when you finish
setting all the contents.
Connection to a Cable /
Satellite Box
If you have a Cable / Satellite Box, follow the
instructions below.
A
Before Connecting
❶Disconnect the power cords of the devices from
the AC outlet.
❷Disconnect RF coaxial cable from antenna input
jack of your TV.
B
Connecting
Make the connections as illustrated below.
AUDIOOUT
LR VIDEO
OUT
S-VIDEO
OUT
RFOUTANT.IN
IN
OUT
OUT
VIDEO
OUT
Y
P R /C R
P B /C B
R
L
R
L
VIDEO
IN
S-VIDEO S-VIDEOANTENNA
COAXIAL OPTICAL
AVIN AVOUT
COMPONENT
VIDEOOUTPUT
DIGITALAUDIOOUTPUT
PCM/BITSTREAM
IN
HDMIOUT
ANT.IN
AUDIO IN
RL
VIDEO IN
RF OUTANT.IN
AUDIOOUT
LR VIDEO
OUT
S-VIDEO
OUT
N
IN
OUT
OUT
VIDEO
OUT
Y
P R /C R
P B /C B
R
L
R
L
VIDEO
IN
S-VIDEO S-VIDANTENNA
AV IN AVOUT
COMPONENT
VIDEOOUTPUT
IN
rear of
this unit
cable/satellite
box
rear of your TV
2
1
3
4
5
6
from
cable TV /
satellite
RF coaxial
cable
RF coaxial
cable
RF coaxial
cable
RCA audio /
video cable
RCA
audio /
video cable
❶Connect the RF coaxial cable from the cable TV /
satellite to the antenna input jack of your cable /
satellite box.
❷Use RF coaxial cable to connect the RF output
jack of your cable / satellite box to ANTENNA
IN jack of this unit.
❸Use RF coaxial cable to connect ANTENNA
OUT jack of this unit to the antenna input jack of
your TV.
❹Use RCA audio / video cables to connect the
audio / video output jacks of your cable / satellite
box to the AV IN jacks of this unit.
❺Use RCA audio / video cables to connect the AV
OUT jacks of this unit to the audio / video input
jacks of your TV.
❻Plug in the power cords of the devices to the AC
outlet.
*
Refer to the user manual for other
connection methods.
E2H42UD_DVDR3576H-37_QG_EN.indd 2E2H42UD_DVDR3576H-37_QG_EN.indd 2 2008/01/05 19:39:272008/01/05 19:39:27