Philips DVR2008/97 User manual

Quick Start Guide
2008 © Koninklijke Philips N.V.
All rights reserved.
sgpjl_822/97EN02
www.philips.com
Need help?
User Manual
See the user manual that came with your Philips recorder.
3Enjoy Register your product and get support at:
www.philips.com/welcome
DVR2008
Connect
Set up
Enjoy
1
2
3
What’s in the box?
HDD
HDD Recorder
Remote Control
and 2 batteries
RF antenna cable
User
Manual
Audio/video cable
Start time of
the programme Present time
Current
point of
playback LIVE TV
Start playback
A
Play a recording
APress REC LIST.
BUse ST keys to select a title and press u.
To stop play, pressÇ.
B
Play a media le
zTo play from a USB device
Insert the USB device to the USB socket, then press
USB. OR, if a confirmation screen is displayed, select
[ Confirm ] to view the USB contents menu.
Note:
- This recorder supports USB devices which conform
to the USB Mass Storage Device class standard.
zTo play from media files
Press HOME, then select [ Media Files ], then
press OK.
Previous
List
Music
Edit Repeat
Artist: Artiste1
Title: Music
Album: Music
Genre: Rock
Tra ck : 1
Comment:
1. Music.mp3 2.Music2.mp3 3. Music3.mp3 4.Music4.mp3
APress Xto select the media type [ Music ],
[ Photos ] or [ Movies ],
BSelect the title and press u. To stop play, pressÇ.
About the Time Shift Buffer
Once you turn on the recorder, the selected TV
programme will be stored in a temporary hard disk
storage called Time Shift Buffer ‘TSB’. The ‘TSB’ can
store up to 10 hours of programmes temporarily in
Standard Play (SP) mode.
Press DISPLAY to display the Time Shift video bar.
11:01:05 12:10:05
11:49:10
During play of :
zTo watch live TV, press LIVE TV.
zTo go to current play position of connected device,
press Ç.
Note:
- The contents in the time shift video bar will be
cleared when you press 2, USB, TIMER or REC LIST.
Start recording
A
Record from TV or an external
device
zTo record a TV programme,
Press 0 - 9 to select the preset channel to record.
Note If you have used Option B in ‘Basic
Connection’, press SOURCE repeatedly to select
‘CVBS’. Use the remote control of your cable box to
select the TV programme to record.
zTo record from a connected device,
press SOURCE repeatedly to select the video
source to record (CVBS or YPbPr).
APress âto start recording. Press âagain to extend
the recording time.
BTo end recording, pressÇ.
CTo playback the recording, press REC LIST, use
ST keys to select the title and press u.
DVR2008AP_qsg_eng_wk822.indd 1DVR2008AP_qsg_eng_wk822.indd 1 2008-05-23 3:39:42 PM2008-05-23 3:39:42 PM

1Connect 2Set up
Basic Connection
Before Connecting
Select one of the following basic connections ( Aor B) according to the type of connecting devices you have.
Option A
Use this connection if you are connecting the antenna
cable directly from the antenna wall socket or from a
cable TV socket.
AUnplug the antenna cable that is connected to your
TV and plug it into the ANTENNA-IN socket
on this recorder.
BConnect the supplied RF antenna cable from the
TV-OUT socket on the recorder to the
Antenna In socket on the TV.
CConnect a composite video cable (yellow end) from
the CVBS OUTPUT socket on the recorder to
the video input socket on your TV.
DConnect an audio cable (red/white ends) from the
AUDIO OUTPUT sockets on the recorder to the
audio input sockets on your TV.
EPlug in the power cord from the recorder to an AC
power outlet.
Television (rear)
Note See the accompanying user manual for other possible connections (e.g. Component Video or S-VIDEO).
Philips Recorder (rear)
Option B
Use this connection if your current antenna cable is
connected to a cable box.
AKeep the existing antenna connection from the cable
box to your TV.
BConnect the supplied RF antenna cable from the
ANTENNA-IN socket on the recorder to the
RF Out socket on the cable box/ satellite receiver.
CFollow steps Cto Dunder ‘Option A’ before you
proceed to step Dbelow.
DConnect a composite video cable (yellow end) from
the VIDEO INPUT socket on the recorder to the
video output socket on your cable box/satellite
receiver.
EConnect an audio cable (red/white ends) from the
AUDIO INPUT sockets on the recorder to the
audio output sockets on your cable box/satellite
receiver.
FPlug in the power cord from the recorder to an AC
power outlet.
TV-OUT ANTE NNA-IN
MAINS
YPr Pb
VIDEO
OUTPUT
AUDIO
LR
CVBS
INPUT
S-VIDEO
YPb Pr
VIDE
AUDIO
L R
CVBS
O
1
INPUT
YPb Pr
VIDE
AUDIO
LR
CVBS
O
INPUT
RF
S-VIDEO
OUT
IN AUDIO
R L
VIDEO
RF
S-VIDEO
OUT
IN AUDIO
R L
VIDEO
6
From an off-air
antenna wall
socket
Television (rear)
Cable Box (rear)
DAutomatic channel search begins.
Cancel
OK
First Installation
Menu Language
TV Region
TV Shape
Auto Scan
Clock
Note If you have used Option Bin ‘Basic
Connection’ select [ Cancel ], then press OK to skip
channel search. No preset channels will be stored.
Otherwise, wait for auto scanning to complete.
ESet the date and time.
Use the numeric keypad 0-9 to enter the correct
date and time. Use WX keys to toggle between the
fields. Press OK to confirm. Select [ Confirm ],
then press OK.
Year Month Day
2008 1 1
Hour Min. Sec.
00 00 00
First Installation
Menu Language
TV Region
TV Shape
Auto Scan
Clock
FInstallation is complete.
Setup Completed
First Installation
Menu Language
TV Region
TV Shape
Auto Scan
Clock
The recorder is now ready for use.
A
Finding the viewing channel
APress 2on the recorder.
BSwitch on the TV and other connected devices (e.g.
Cable box, Satellite receiver). The installation menu is
displayed.
Menu Language
TV Region
TV Shape
Auto Scan
Clock
First Installation

CIn case you don’t see the recorder’s installation menu,
press the channel down button on the TV’s remote
control repeatedly (or AV, SELECT, °button) until you
see the menu. This is the correct viewing channel for
the recorder.
B
Start basic setup
Use the recorder’s remote control and follow the on-
screen instructions to complete the installation.
Note Press ST keys to toggle between options.
To conrm your selection, press OK.
ASelect the menu display language.
Menu Language
TV Region
TV Shape
Auto Scan
Clock
First Installation

BSelect the country of your residence.
Use ST keys to select the option. Press OK to
confirm.
CSelect the TV aspect ratio.
Use ST keys to select the option. Press OK to
confirm.
TV-OUT ANTENNA-IN
MAINS
YPr Pb
VIDEO
OUTPUT
AUDIO
LR
CVBS
INPUT
S-VIDEO
YPb Pr
VIDE
AUDIO
L R
CVBS
O
R
1
YPr Pb
VIDEO
OUTPUT
AUDIO
LR
CVBS S-VIDEO
OUTPUT
From an off-air
antenna wall or
cable TV socket
Philips Recorder (rear)
DVR2008AP_qsg_eng_wk822.indd 2DVR2008AP_qsg_eng_wk822.indd 2 2008-05-23 3:39:44 PM2008-05-23 3:39:44 PM