Philips ExpertClean Sonicare 7300 User manual

English 6
Русский 30
Қазақша 58

English
6English
Introduction
Congratulations on your new Philips Sonicare power toothbrush! Superior
plaque removal, whiter teeth and healthier gums are at your fingertips.
Using Sonicare’s combination of gentle sonic technology and clinically
developed and proven features, you can be confident that you’re getting
the very best clean, every time. Further support and product registration
are available to you at: http://www.philips.com/welcome.
Welcome to the Philips Sonicare family!
Intended Use
ExpertClean series power toothbrushes are intended to remove adherent
plaque and food debris from the teeth to reduce tooth decay and improve
and maintain oral health. ExpertClean series power toothbrushes are
intended for consumer home use. Use by children should be with adult
supervision.
Important safety information
Only use the product for its intended purpose. Read this important
information carefully before you use the product and its batteries and
accessories, and save it for future reference. Misuse can lead to hazards or
serious injuries.
Warnings
- Keep the charger and/or sanitizer away from water.
- Do not place or store the appliance where it can fall or be pulled into a
tub or sink.
- After cleaning, make sure the charger and/or sanitizer is completely dry
before you connect it to the wall socket.
- This appliance can be used by children and persons with reduced
physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the
hazards involved. Cleaning and user maintenance shall not be made by
children without supervision.
- Children shall not play with the appliance.
- Keep the sanitizer out of the reach of children at all times.
- Stop using the sanitizer if the UV light bulb remains on when the door
is open. UV light can be harmful to the human eye and skin.
- Only operate the sanitizer with the protective screen in place.
- Do not touch the sanitizer's UV light bulb when it is hot.

7
English
- If you have used the sanitizer for 3 UV clean cycles in a row, switch it off
for at least 30 minutes before you start another UV clean cycle.
- Only use original Philips accessories or consumables. Only use the
charger provided with the product. If supplied, only use the original
USB cable and USB power supply unit.
- If the appliance is damaged in any way (brush head, toothbrush
handle, charger and/or sanitizer), stop using it.
- This appliance contains no user-serviceable parts. If the appliance is
damaged, stop using it and contact the Consumer Care Center in your
country (see 'Warranty and support'). If the cord is damaged, replace
the charger and/or sanitizer with a new one.
- Do not use the charger and/or sanitizer outdoors or near heated
surfaces.
- Do not clean any part of the product in the dishwasher.
- This appliance has only been designed for cleaning teeth, gums and
tongue.
- Stop using the appliance and consult your dentist/doctor if excessive
bleeding occurs after use, if bleeding continues to occur after 1 week of
use or if you experience discomfort or pain.
- If you have had oral or gum surgery in the previous 2 months, consult
your dentist before you use this appliance.
- If you have a pacemaker or other implanted device, contact your
doctor or the manufacturer of the implanted device prior to use.
- If you have medical concerns, consult your doctor before you use this
appliance.
- This appliance is a personal care device and is not intended for use on
multiple patients in a dental practice or institution.
- Stop using a brush head with crushed or bent bristles. Replace the
brush head every 3 months or sooner if signs of wear appear.
- If your toothpaste contains peroxide, baking soda or bicarbonate
(common in whitening toothpastes), thoroughly clean the brush head
with soap and water after each use. This prevents possible cracking of
the plastic.
- Avoid direct contact with products that contain essential oils or
coconut oil. Contact may result in bristles dislodging.
- Only use this product for its intended purpose as shown in this user
manual. Misuse can lead to hazards or serious injuries.
- Only use original Philips accessories or consumables. Only use charger
HX61xx, TCB
- Charge, use and store the product at a temperature between 0°C and
40°C.

8English
- Keep product and batteries away from fire and do not expose them to
direct sunlight or high temperatures.
- If the product becomes abnormally hot or smelly, changes color or if
charging takes longer than usual, stop using and charging the product
and contact Philips.
- Do not place products and their batteries in microwave ovens or on
induction cookers.
- Do not open, modify, pierce, damage or dismantle the product or
battery to prevent batteries from heating up or releasing toxic or
hazardous substances. Do not short-circuit, overcharge or reverse
charge batteries.
- If batteries are damaged or leaking, avoid contact with the skin or eyes.
If this occurs, immediately rinse well with water and seek medical care.
Electromagnetic fields (EMF)
This Philips appliance complies with all applicable standards and
regulations regarding exposure to electromagnetic fields.
Radio Equipment Directive
Hereby, Philips declares that electric tootbrushes equipped with a radio
frequency interface (Bluetooth or NFC) are in compliance with Directive
2014/53/EU.
- The Bluetooth radio frequency interface in applicable products
operates at 2.4 GHz.
- The maximum radio frequency power of products equipped with
Bluetooth is 3 dBm.
- The NFC radio frequency interface in applicable products operates at
13.56 MHz.
- The maximum radio frequency power of products equipped with NFC
is 30.16 dBm.
The full text of the EU declaration of conformity is available at the
following internet address: www.philips.com/support
Note: The Features of different models may vary. Some models may
not be equipped with Bluetooth or NFC.

9
English
Your Philips Sonicare (Fig. 1)
1 Hygienic travel cap
2 Smart brush head(s)
3 Handle
4 Power on/off button
5 Intensity light
6 Mode/intensity button
7 Modes
8 Brush head replacement reminder light
9 Battery indication
10 Charger
11 Travel case *
12 USB wall adapter*
13 Micro USB cable *
14 UV Sanitizer*
* Note: The content of the box may vary based on the model
purchased.
Using your Philips Sonicare
Brushing instructions
1Push the brush head firmly onto the handle. Wet bristles and apply
toothpaste.
Note: It is normal to see a slight gap between the brush head and the
handle. This allows the brush head to vibrate properly.
2Place the toothbrush bristles against the teeth at a slight angle (45
degrees), pressing firmly to make the bristles reach the gumline or
slightly beneath the gumline.

10 English
Note: Keep the center of the brush in contact with the teeth at all
times.
3Press the power on/off button to turn on the Philips Sonicare.
4Apply light pressure to maximize Philips Sonicare’s effectiveness and
let the Philips Sonicare toothbrush do the brushing for you. Gently
move the brush head slowly across the teeth in a small back and forth
motion so the longer bristles reach between your teeth. Continue this
motion throughout the brushing cycle.
Note: To learn how to brush with specific modes, see ‘Modes’.
5To clean the inside surfaces of the front teeth, tilt the brush handle
semi-upright and make several vertical overlapping brushing strokes
on each tooth.

11
English
Note:
- A change in vibration from the handle alerts you when you apply too
much pressure (see Pressure sensor)
- Your Philips Sonicare toothbrush is safe to use on braces ,dental
moderations and dental restorations (fillings, crowns, veneers)
- Do not use your power toothbrush in the shower.
Brush heads
To see what type of brush head you have, check the label at the bottom of
the brush head. The symbol at the bottom of the brush head indicates
that it is a smart brush head, equipped with the BrushSync technology.
Brush head
name
Premium Plaque
Control
Premium White Premium Gum
Care
Brush head
label
C3 W3 G3
Benefit Plaque removal Plaque and stain
removal
Healthier Gums
To explore our full range of brush heads, go to
www.philips.com/toothbrush-heads for more information.
*Note: The type of brush heads vary based on the model purchased.
BrushSync Technology
BrushSync technology enables your brush heads to communicate with
your handle using a microchip. The symbol at the bottom of the brush
head indicates that it is equipped with the BrushSync technology. This
enables the following features:
- Brush head mode pairing
- Brush head replacement reminder

12 English
Brushing modes
Your power toothbrush is equipped with up to 4 different modes*: Clean,
Deep Clean+, White+* and Gum health*.
Based on the smart brush head you use, the mode will be selected
automatically.
To manually change the mode, press the mode/intensity button while the
toothbrush is off.
* Note:
- The type and number of modes vary based on the model purchased.
- All brush heads work with each mode.
- When the Philips Sonicare toothbrush is used in clinical studies, it must
be used at high intensity, with the EasyStart feature turned off.
Brush head mode pairing
Brush heads with BrushSync technology are equipped with a microchip
which communicates to the handle and automatically pairs it with the
recommended mode and intensity.
Note: If you change modes/intensity, the brush head will remember the
last used setting. If you wish to brush with the recommended setting, you
can find the recommended mode/intensity in ‘Brushing Modes’.

13
English
Clean and Deep
Clean+
White+ Gum Health
Benefit Plaque removal Plaque and
surface stains
removal
Plaque removal
and gum
massage
Recommended
brush head
Premium Plaque
Control* (C3)
Premium White*
(W3)
Premium Gum
Care* (G3)
Recommended
intensity level
3 3 3
Total brushing
time
Clean: 2 minutes
Deep Clean: 3
minutes*
2 minutes and
40 seconds
3 minutes and
20 seconds
*Note:
- The modes and type brush head vary based on the model purchased.
- When brushing with the Sonicare App in 'Deep Clean' mode, the
brushing time will be 2 minutes.

14 English
Clean and Deep
Clean+
White+ Gum Health
How to brush Clean: Brush
each segment
for 20 seconds
Deep Clean+:
Brush each
segment for 30
seconds
Brush each
segment for 20
seconds,
then brush
segments 1 and
2 for 20 seconds
each.
Brush each
segment for 20
seconds,
then brush
segments 1, 2, 3
and 4 for 20
seconds each.
Intensity settings
Your power toothbrush comes with 3 different intensity settings: low,
medium and high. When attached to the handle, the smart brush head will
automatically select the recommended intensity. To manually change the
intensity, turn on the handle and press the mode/intensity button.

15
English
While toothbrush is
ON, press this
button to change
intensity setting
Features
- EasyStart
- Sonicare App - Connected brushing experience
- Brush head replacement reminder
- Pressure sensor
- BrushPacer
EasyStart
The EasyStart feature gently increases the power of the handle over the
first 14 brushings to help you get used to the brushing power of the Philips
Sonicare.
The EasyStart feature works with all modes.
Note: The EasyStart feature comes deactivated with your product. To
activate EasyStart, see 'Activating or deactivating features'.
Sonicare App - Connected brushing experience
The Sonicare app pairs with your toothbrush to provide you with
interactive brushing features. By brushing with your Sonicare app account,
you will be able to:
- Receive brushing suggestions and personalized feedback
- Track your brushing progress over time
To start using the connected brushing features:
1Download the Sonicare app to your phone
2Follow the steps in the app setup

16 English
3Pair your toothbrush with the app
4Create your account
5Personalize your app by answering questions about your brushing
habits and interests
6Start your connected brushing experience
Note: Make sure your phone’s Bluetooth is turned on when using the
connected brushing features.
Note: If you have any questions while setting up your account, be sure to
review the Sonicare Privacy Statement, available throughout the app
setup process.
How to Brush with the App
1Go to the Brushing Screen in the app and select Start Brushing.
2First brushing starts on the upper right molar. You can customize your
starting location in Settings.
3Follow the brushing guidance.
Tip: To ensure the best performance of the brushing sensors, keep your
head looking forward.
4Gently begin brushing. The app will highlight the correct segment. The
timer will help you keep track.
5Move your brush head when the highlighted segment changes.
6Repeat, until you finish brushing all segments.
7When done brushing, review and touch up any missed areas. Follow
the in-app instructions on how to use the touch-up feature.
Brush Head Replacement Reminder
Over time, the handle will track the wear of your smart brush head by
measuring:
- The overall pressure you apply while brushing
- The total time you have brushed with your brush head
Once your brush head is no longer effective, the Brush Head Replacement
Reminder will blink amber and audibly beep.

17
English
Note: The Brush Head Replacement Reminder comes activated with your
product. To deactivate this feature, see 'Activating or deactivating
features'.
Pressure sensor
Your Philips Sonicare measures the pressure you apply while brushing to
protect your gums and teeth from damage.
If you apply too much pressure, the handle will change its vibration until
you reduce the pressure.
Note: The Pressure Sensor comes activated with your product. To
deactivate this feature, see 'Activating or deactivating features'.
BrushPacer
The BrushPacer features indicates when you are supposed to move onto
the next section of your teeth via a brief change in vibration.
The toothbrush will automatically turn off at the end of the brushing
session.
Charging and battery status
Charging
1Plug the charger into an electrical outlet.
2Place the handle on the charger.
3The charging indicator will flash green until your toothbrush is fully
charged.
Note: Your handle comes pre-charged for first use. After first use, charge
for at least 24 hours.
Charging on charger or sanitizer
1Plug the charger or sanitizer into an electrical outlet.
2Place the handle on the charger or sanitizer.

18 English
3The charger will charge your toothbrush until it is fully charged.
Note: Your handle comes pre-charged for first use. After first use, charge
for at least 24 hours.
Charging with the travel case*
* Note: The charging travel case may not be included depending on the
model purchased.
1Connect the charging travel case to 5V DC input power either from:
- The USB adapter provided
- a UL-listed or certified to ANSI/UL 60950-1 personal computer's
standard USB connector or,
- a UL-listed or certified to ANSI/UL 60950-1 LPS power supply with
USB output port or,
- a UL-listed or certified 1310 Class 2 power supply.
Important: The wall adapter must be a safe extra low voltage
source, compatible with the electrical ratings marked on the bottom
of the device.
2The travel case will charge your toothbrush until your toothbrush is
fully charged.
Note: Charging the handle with the charging travel case may take longer
than on the charger.
Battery Status (handle on plugged in charger)
When the handle is placed on the charger, sanitizer or travel case , the
battery light will flash green based on the current battery level.
Number of Flashing LEDs Battery charging status
1 Low
2 Medium
3 High
Note: When the handle is fully charged, the three battery indicator lights
light up green. After 30 seconds the battery indicator lights switch off.
Battery Status (when handle is not placed on Charger)
When removing the handle from the charger, sanitizer or travel case, the
battery light at the bottom of the handle will indicate the status of the
battery.

19
English
LED Color Number of LEDs Battery status
Solid Green 3 High
Solid Green 2 Medium
Solid Green 1 Low
Flashing Amber 1 (with beeps) Empty or near empty
UV Sanitizer
- With the UV sanitizer you can clean your brush head after every use.
Unplug the sanitizer, discontinue use and call Consumer Care if:
- The UV light bulb remains on when the door is open.
- The window is broken or missing from the sanitizer.
- The sanitizer gives off smoke or a burning smell while it is operating.
Note: UV light can be harmful to the human eye and skin. This device
should be kept out of reach of children at all times.
1After brushing, rinse the brush head and shake off excess water.
Warning: Do not place the travel cap on the brush head during
sanitization.
2Place your finger in the door recess on top of the sanitizer and pull
open the door.

20 English
3Place the brush head on one of the 2 pegs in the sanitizer with the
bristles facing the light bulb.
Note: Only clean Philips Sonicare snap-on brush heads in the sanitizer.
Note: Do not clean Philips Sonicare for Kids brush heads in the
sanitizer.
4Make sure the sanitizer is plugged into a live outlet of appropriate
voltage.
5Close the door and press the green power on/off button once to select
the UV clean cycle.
Note: You can only turn on the sanitizer if the door is properly closed.
Note: The sanitizer stops if you open the door during the sanitizing
cycle.
Note: The sanitizer cycle runs for 10 minutes and then automatically
shuts off.
The sanitizer is in operation when the light glows through the window.