Philips Sonicare DiamondClean User manual

How to charge my Phillips Sonicare Toothbrush
Depending on the model you have, you can charge your Philips Sonicare Toothbrush with a
normal charger, charging glass, travel case or charging pad. Find out how to charge your Philips
Sonicare Toothbrush.
Charging your Philips Sonicare Toothbrush
1. Plug the charger in a live outlet
2. Place the handle on the charger
3. The battery indicator will start flashing to indicate that your toothbrush is charging.
The battery indicator stops flashing when your toothbrush is fully charged. It can take up to 24
hours before your toothbrush is fully charged.
Charging your DiamondClean Toothbrush with the charging glass
Follow these instructions on how to charge your DiamondClean or DiamondClean Smart
Toothbrush with the charging glass
1. Place the handle in the charging glass or stand and place it on the charging base
2. Plug the charging base in an outlet
3. The battery indicator will start flashing white or green to indicate that your toothbrush is
charging.
The battery indicator stops flashing when your toothbrush is fully charged. It can take up to 24
hours before your toothbrush is fully charged.

Charging your DiamondClean Toothbrush with the travel case
Follow these instructions on how to charge your DiamondClean or DiamondClean Smart
Toothbrush with the travel case
1. Place the handle in the travel case
2. Connect a mini USB cable from the travel case to the USB adapter or a laptop
3. Some models come with a build in USB cable which is located at the bottom of your
travel case.
4. The battery indicator will start flashing white or green to indicate that your toothbrush is
charging
The battery indicator stops flashing when your toothbrush is fully charged. It can take up to 24
hours before your toothbrush is fully charged.
Charging your DiamondClean Toothbrush with the charging pad
Follow these instructions on how to charge your DiamondClean Toothbrush on the wireless
charging pad.
1. Plug the USB cable into the wall adapter and plug into a live outlet
2. Place the handle on the raised surface of the charging pad

3. The charging pad beeps and the battery indicator will start flashing white to indicate that
your toothbrush is charging.
The battery indicator stops flashing and turns solid white when your toothbrush is fully charged.
It can take up to 12 hours before your toothbrush is fully charged.
How to change modes or intensity settings of
my Philips Sonicare toothbrush
Find out how to change the intensity settings or brushing modes of your Philips Sonicare
toothbrush. Find the settings that fit your brushing experience.
Instructions to change intensity settings
To change the intensity settings of your Philips Sonicare toothbrush, follow these simple steps:
1) Turn on your Sonicare toothbrush
1. Press the mode button (or the power button if you do not have a mode button) to change
and select the preferred brushing mode
3) Your Philips Sonicare toothbrush will remember the selected intensity settings for your
next brushing session.
Tip: change the intensity settings before rinsing the brush head or applying toothpaste.
Instructions to change and select brushing modes
To change the brushing modes of your Philips Sonicare toothbrush, follow these simple steps.
Please note that not all Philips Sonicare toothbrush models have brushing modes available.
1. Turn off your Philips Sonicare toothbrush
2. Press the mode button (or the power button if you have a Philips Sonicare
DiamondClean) to change and select the preferred brushing mode
3. Your Philips Sonicare toothbrush will remember the selected mode for your next
brushing session.

How do I charge my Philips Sonicare
toothbrush
Charging the battery of your Philips Sonicare toothbrush is easy as 1-2-3. Find out how to charge
your Philips Sonicare toothbrush properly.
Most Philips Sonicare toothbrushes
1) Plug the charger into a live electric power outlet
2) Place the handle on the charger
3) The flashing light on the handle indicates that the toothbrush is charging
4) It takes at least 24 hours to fully charge the battery
Please note:
In step 3 above, if the battery charge indicator on the handle does not blink green, you
may not have the charger plugged into a live outlet. To confirm that the charger is
plugged into a live outlet, press the on/off button while the handle is sitting on the
charger.
The handle should not activate when it is charging in a normal manner. If the handle
turns on in the charger, repeat steps 1 - 3 using a different power outlet. If you repeat the
procedure and your handle continues to activate while on the charger, contact the Philips
call center for instructions
Charging your Philips Sonicare DiamondClean and
DiamondClean Smart toothbrush
1) Plug the chrome base charger into a live electric power outlet
2) Place the glass on the chrome base
3) Place your Philips Sonicare DiamondClean or DiamondClean smart into the glass in an
upright position
4) The flashing light on the handle indicates that the toothbrush is charging*. If the indicator
does not start flashing, keep the handle in the charger for at least 10-15 minutes to allow the
toothbrush to recover
5) It takes at least 24 hours to fully charge the battery
DiamondClean Smart toothbrushes (in addition to a flashing battery indicator) will also
illuminate at the bottom and you will hear a beep.
Philips Sonicare PowerUp
For PowerUp, the procedure for checking to see if the handle is charging is different:

1) Plug the charger into an outlet that you know is a live outlet
2) Place the handle on the charger
3) If the battery is charging, the battery charge indicator will begin to flash green. With the
handle on the charger, press the on/off button. The handle should not activate when it is charging
in a normal manner
4) It takes approximately 30 hours to fully charge the battery
How to use my Philips Sonicare Toothbrush
with braces
All Philips Sonicare Toothbrushes are suited for braces. Use this instructional video to brush
your teeth with the Philips Sonicare Toothbrush while wearing braces.
Instructions to brush your teeth wearing braces
1. Wet the bristles of the brush head
2. Apply a small amount of toothpaste
3. Place the bristles against your teeth at a 45° angle
4. Press the power button to start brushing
5. First, brush above the brackets. Then below the brackets
6. Finally, clean between your braces with a circular motion
Please do not force the bristles into the gaps of your braces.
How to clean my Philips Sonicare toothbrush
Improve the lifespan of your Philips Sonicare Toothbrush and clean your toothbrush and brush
heads regularly. View this instructional video on how to keep your toothbrush clean and healthy.
Instructions to clean your Philips Sonicare Toothbrush
Follow these simple steps to clean and maintain your Philips Sonicare Toothbrush. Never use the
dishwasher to clean your toothbrush, brush head or charger.
**Cleaning your toothbrush after each use
1. Rinse your brush head and bristles to remove toothpaste and food particles.
2. Wipe the entire surface of the handle with a damp cloth
Clean your toothbrush every week
1. Remove the brush head

2. Rinse the bottom of the brush head with warm water
3. Rinse the metal shaft area with warm water
4. Wipe the entire surface of the handle with a damp cloth
Note: Do not push on the rubber seal around the metal shaft with sharp objects, as this may cause
water damage.