Philips SHB6017/28 User manual

Quick start guide
Philips Bluetooth stereo headset SHB6017
EN
Exchangeable ear caps
Power on/off
Mic
LED
Adjustable ear hook
Charging socket
Charge the headset
1Remove the USB cap.
2Plug the headset into a powered
USB port with USB charging cable.
Get the best fit
1Choose the earbuds that best t for your ear canal.
2Gently blend the earhook to t into your ears.
3Adjust the rubber part of the earhook to the height
that you feel t.
4Twist the earbuds to the right position for best t and
noise isolation.
Please refer to www.philips.com/welcome for full user manual.
Pair the headset with your mobile phone
1Ensure that the mobile phone is turned
on and its Bluetooth feature is activated.
2Ensure that the headset is charged and
turned off.
3Press until the LED starts ashing red
and blue alternately. Do not stop pressing
the button after seeing the blue LED only.
The headset is in pairing mode, which
»
lasts ve minutes.
4Pair the headset with the mobile phone.
For details, refer to the user manual of the
mobile phone.
Settings Connectivity
Select
Back
Enter Password
Settings
Devices Found
Select
Back
Philips SHB6017
Settings Connectivity
Bluetooth
Select
Back
Add
Bluetooth
device
The PIN code ''0000''
is not required for
some mobile phones.

© 2011 Koninklijke Philips Electronics N.V. All rights reserved.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
V1.0
Turn headset on/off Hold until LED turns on/off.
Play / Pause music Tap
Stop music Hold
Next / Previous track Tap /
Adjust volume Press VOL +/VOL -
Pick up / End a call Tap
Reject a call Hold
Redial the last number Press twice quickly.
Activate voice dialing* Hold until beep occurs.
Mute/Unmute the Mic Double tap during a call.
Transfer a call to a mobile phone Hold during a call.
Operate the headset
*Available if supported by your mobile phone.
The red/blue LED ashes alternately. The headset is ready for pairing.
The blue LED ashes once every 6
seconds. The headset is connected to the device.
The blue LED ashes twice every 3
seconds. The headset is not connected.
The blue LED ashes once every half a
second. There is an incoming/outgoing call.
The blue LED ashes once every second. The headset is active on a call.
The red LED ashes three times and
beeps twice every minute.
The battery is low in power.
Solid red LED. The headset is charging.
The LED is off. The headset is off./Charging is nished.
The headset beeps every 5 seconds. The Mic is muted.
LED and sound indication
Welcome to Philips!
For an optimal experience, register your product at
www.philips.com/welcome