Philips HTS3373/98 User manual

Register your product and get support at
www.philips.com/welcome
HTS3373
EN User manual
MS-MY Manual pengguna
=+7: Ԛʹ˫ 
=+&1 Ⴌ߀൱Ҭ 

2

3
7 Adjust sound 29
Control the volume 29
Select surround sound 29
Select a preset sound 29
8 Adjust settings 30
General setup 30
Audio setup 32
Video setup 33
Preferences 35
9 Additional Information 37
Update software 37
Care 37
10 Specications 38
11 Troubleshooting
40
12 Glossary
42
Contents
1 Important 4
Safety and important notice 4
Trademark notice 5
2 Your product 6
Feature highlights 6
Product overview 7
3 Connect 9
Place the product 9
Connect video cables 9
Connect speaker cables to speakers 11
Connect speaker to speaker stand 11
Connect speakers and subwoofer 11
Connect radio antenna 12
Connect audio cables/other devices 12
Connect power cord 14
4 Get started 15
Insert the remote control batteries 15
Find the correct viewing channel 15
Select menu display language 16
Turn on Progressive Scan 16
Change speaker settings 17
Use Philips EasyLink 18
Select a play source 19
5 Play 20
Play a disc 20
Play video 20
Play music 23
Play photo 24
Play from USB device 25
Play from portable media player 26
Play from radio 26
6 Advanced features 28
Create MP3 audio les 28
English
EN

4
Macrovision copyright
This product incorporates copyright
protection technology that is protected
by method claims of certain U.S. patents
and other intellectual property rights
owned by Macrovision Corporation and
other rights owners. Use of this copyright
protection technology must be authorized
by Macrovision Corporation, and is intended
for home and other limited viewing uses only
unless otherwise authorized by Macrovision
Corporation. Reverse engineering or
disassembly is prohibited.
Recycle notice
This electronic equipment contains a large
number of materials that can be recycled
or reused if disassembled by a specialized
company. If you are disposing of an old
machine, please take it to a recycling center.
Please observe the local regulations regarding
disposal of packaging materials, exhausted
batteries and old equipment.
About Progressive Scan
Consumers should note that not all high
denition television sets are fully compatible
with this product and may cause artifacts to
be displayed in the picture. In case of 525
or 625 progressive scan picture problems,
it is recommended that the user switch the
connection to the ‘standard denition’ output.
If there are questions regarding our TV set
compatibility with this model 525p and 625p
DVD player, please contact our customer
service center.
1 Important
Safety and important notice
Warning
Risk of overheating! Never install the product•
in a conned space. Always leave a space
of at least 4 inches around the product for
ventilation. Ensure curtains or other objects
never cover the ventilation slots on the
product.
Never place the product, remote control or
•
batteries near naked ames or other heat
sources, including direct sunlight.
Only use this product indoors. Keep this
•
product away from water, moisture and liquid-
lled objects.
Never place this product on other electrical
•
equipment.
Keep away from this product during lightning
•
storms.
Where the mains plug or an appliance
•
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
Visible and invisible laser radiation when open.
•
Avoid exposure to beam.
Copyright
The making of unauthorized copies of
copy-protected material, including computer
programmes, les, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
EN

5
Windows Media and the Windows logo are
trademarks, or registered trademarks of
Microsoft Corporation in the United States
and/or other countries.
HDMI, and HDMI logo and High-Denition
Multimedia Interface are trademarks or
registered trademarks of HDMI licensing LLC.
The USB-IF Logos are trademarks of Universal
Serial Bus Implementers Forum, inc.
LASER RADIATION
DO NOT VIEW DIRECTLY
WITH OPTICAL INSTRUMENTS
CLASS 1M LASER PRODUCT
Trademark notice
Manufactured under license from Dolby
Laboratories. Dolby, Pro Logic and the
double-D symbol are trademarks of Dolby
Laboratories.
DivX, DivX Ultra Certied, and associated
logos are trademarks of DivX, Inc. and are
used under license.
Ofcial DivX® Ultra Certied product.
Plays all versions of DivX ® video (including
DivX ® 6) with enhanced playback of DivX®
media les and the DivX® Media Format.
Plays DivX® video with menus, subtitles and
audio tracks.
Manufactured under license under U.S. Patent
#’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,487,535 & other U.S. and worldwide patents
issued & pending. DTS and DTS Digital
Surround are registered trademarks and the
DTS logos and Symbol are trademarks of
DTS, Inc. © 1996-2008 DTS, Inc. All Rights
Reserved.
ENERGY STAR and the ENERGY STAR mark
are registered U.S. marks.
English
EN

6
Hi speed USB 2.0 Link and MP3 link
Simply plug your USB device into the USB jack
to play your MP3/WMA/JPEG/DivX les; or
plug your portable media player to the MP3
LINK jack to enjoy the music play in superb
sound quality.
Sync the audio output with the video play
Synchronize audio and video by delaying the
audio output if the video signal sent to the TV
is slower than the audio streams.
Create MP3 les
Convert your favorite audio tracks from an
audio CD into MP3 format. The created MP3
les are saved in your USB device.
Screen Fit
View the movie in full screen display on any
TV. It is only applicable to DVD and JPEG les.
Region codes
You can play discs with the following region
codes.
DVD region code Countries
Asia Pacic, Taiwan, Korea
Australia, New Zealand,
Latin America
India
China
2 Your product
Congratulations on your purchase, and
welcome to Philips! To fully benet from the
support that Philips offers, register your product
at www.philips.com/welcome.
Feature highlights
Video upscaling to 1080p
Enjoy watching discs in the highest picture
quality available for your HDTV. This product
offers full high-denition video playback up
to 1080p resolution that provides a highly
detailed picture and increased sharpness that
delivers a more true-to-life picture for an
amazing viewing experience.
Philips EasyLink
Your product supports Philips EasyLink, which
uses the HDMI CEC (Consumer Electronics
Control) protocol. EasyLink-compliant devices
that are connected through HDMI connectors
can be controlled by a single remote control.
Note
Philips does not guarantee 100%•
interoperability with all HDMI CEC devices.
Listen to rich uncompressed multi-channel
surround sound
This Home Theater System supports 5.1
channels of uncompressed audio that delivers
a real-to-life sound experience as if you are
listening to it live.
EN

7
k (USB)
Connects a USB supported device.•
Remote control
a (Standby-On)
Turns on the Home Theater System•
or switches to standby mode.
When EasyLink is enabled, press•
and hold for at least three seconds
to turn all connected HDMI CEC
compliant devices to standby.
b
(Open/Close)
Opens or closes the disc•
compartment.
c SLEEP
Sets a delay after which the home•
theater system switches to standby.
n
q
r
s
t
u
v
w
x
m
a
b
c
d
e
f
g
h
i
j
k
l
p
o
Product overview
Main unit
a (Standby-On)
Turns on the Home Theater System•
or switches to standby mode.
b Disc compartment
c
(Open/Close)
Opens or closes the disc•
compartment.
d (Play/Pause)
Starts, pauses or resumes play.•
In radio mode, automatically tune•
radio stations during rst-time setup.
e (Stop)
Stops play.•
In radio mode, erases the current•
preset radio station.
f SOURCE
Selects a media to play or listen to•
audio from the connected device.
g Display panel
Displays the current status or the•
disc information.
h IR sensor
Detects signals from the remote•
control. Point the remote control at
the IR sensor.
i VOL
Increases or decreases volume.•
j MP3 LINK
Connects a portable audio player•
a b cdefghijk
English
EN

8
o Source buttons
• AUDIO SOURCE: Selects an audio
input source.
• RADIO: Switches to FM radio.
• USB: Switches to the USB source.
• DISC: Switches to the disc source.
p OK
Conrms an entry or selection.•
q BACK
Returns to a previous screen.•
For DVD, goes to the title menu.•
For VCD version 2.0 or SVCD with•
PBC turned on, returns to the menu
during playback.
r / (Previous/Next)
Skips to the previous or next title,•
chapter, or track.
s (Mute)
Mutes or restores audio output.•
t VOL +/-
Increases or decreases volume.•
u SOUND
Selects a predened sound effect.•
v ANGLE
Displays video from different camera•
angles.
w REPEAT/PROGRAM
Selects or turns off repeat or shufe•
mode.
In radio mode, resets the list of•
preset stations: press to manually
reset; press and hold to automatically
reset.
x REPEAT A-B
Marks the section for repeat play, or•
turns off repeat mode.
d SETUP
Accesses or exits the setup menu.•
e (Navigation buttons)
Navigates through the menus.•
Press left and right for fast backward•
or forward search.
In radio mode, press up and down to•
tune the radio frequency.
In radio mode, press left or right to•
start auto search.
f INFO
For discs, displays information about•
the current status or the disc.
For slideshows, displays a thumbnail•
view of photo les.
g (Play/Pause)
Starts, pauses or resumes play.•
In radio mode, automatically tune•
radio stations during rst-time setup.
h (Stop)
Stops play.•
In radio mode, erases the current•
preset radio station.
i SURR (Surround Sound)
Switches to supported surround•
sound or stereo sound.
j AUDIO SYNC
Selects an audio language or channel.•
Press and hold to access the setting•
for audio sync, then press VOL +/- to
set the audio delay time.
k Numeric buttons
Selects an item to play.•
l SUBTITLE
Selects a subtitle language for video.•
m SCREEN FIT
Fits the picture format to the TV•
screen (using zoom factor 1.3X and
1.6X).
n CREATE MP3/ZOOM
Accesses the menu to create MP3.•
Zooms in or out of the picture.•
EN

9
1 Place the home theater near your TV.
2 Place the speakers system at normal
listening height and parallel to your
listening area.
3 Place the subwoofer in the corner of the
room or at least 1 meter/3 feet away
from your TV.
Tip
To reduce interference or noise, place the•
home theater away from radiation devices.
Connect video cables
Connect this Home Theater System to TV to
view disc play. Select the best video connection
that the TV can support.
Option 1: Connect to the HDMI jack (for•
a HDMI, DVI or HDCP-compliant TV).
Option 2: Connect to the component•
video jacks (for a standard TV or
Progressive Scan TV).
Option 3: Connect to the video (CVBS)•
jack (for a standard TV).
Note
You must connect this Home Theater System•
directly to a TV.
SUBWOOFER
FRONT
RIGHT
FRONT
LEFT
CENTER
REAR
RIGH
T
REAR
LEFT
3 Connect
Make the following connections to use your
Home Theater System.
Basic connections:
Video•
Speakers and subwoofer•
Power•
Optional connections:
Radio antenna•
Audio•
Audio from TV•
Audio from cable box/recorder/•
game console
Other devices•
Portable media player•
USB device•
Note
Refer to the type plate at the back or bottom•
of the product for identication and supply
ratings.
Before you make or change any connections,
•
ensure that all devices are disconnected from
the power outlet.
Tip
Different types of connectors can be used to•
connect this product, depending on availability
and your needs. A comprehensive interactive
guide to help you connect your product is
available at www.connectivityguide.philips.
com.
Place the product
Place the product where it cannot be•
pushed, pulled over or knocked down.
Do not place it in an enclosed cabinet.
Be sure that you have full access to the•
power cord for easy disconnection of the
product from the power supply.
English
EN

10
Option 2: Connect to the component
video jack
1 Connect the component video cable
(not supplied) to the Y Pb Pr jacks on
this Home Theater System and the
COMPONENT VIDEO input jacks on the
TV.
If a progressive scan TV is used, you•
may turn on the progressive scan
mode. (see ‘Get started’ > ‘Turn on
Progressive Scan’).
Note
The component video input jack on the TV•
might be labeled as Y Pb Pr, Y Cb Cr or YUV.
This type of connection provides good picture
•
quality.
VIDEO OUT
Pb PrY
Pb PrY
Option 1: Connect to the HDMI jack
1 Connect an HDMI cable (not supplied)
to the HDMI OUT jack on this Home
Theater System and the HDMI input jack
on the TV.
Note
If your device supports HDMI CEC, you can•
control compliant devices with a single remote
control. (see ‘Get started’ > ‘Use Philips
EasyLink’).
Tip
If the TV has a DVI connection only, connect•
via a HDMI/DVI adaptor. Connect an audio
cable for sound output.
You can optimize the video output. (see
•
‘Adjust settings’ > ‘Video setup’ > [HDMI
Setup]).
This type of connection provides the best
•
picture quality.
HDMI OUT
HDMI IN
EN

11
Connect speaker to speaker
stand
1 Attach the speakers to the speaker stands
and secure the position with screws.
Connect speakers and
subwoofer
Option 3: Connect to the Video
(CVBS) jack
1 Connect a composite video cable to
the VIDEO jack on this Home Theater
System and the VIDEO input jack on the
TV.
Note
The video input jack on the TV might be•
labeled as A/V IN, VIDEO IN, COMPOSITE or
BASEBAND.
This type of connection provides standard
•
picture quality.
Connect speaker cables to
speakers
1 Connect the speaker cables to the
matching color jacks on the speakers (or
speaker stands).
VIDEO
VIDEO OUT
VIDEO IN
English
EN

12
Connect audio cables/other
devices
Route the audio from other devices to this
Home Theater System to enjoy audio play with
multi-channel surround capabilities.
Connect audio from TV
(also used for EasyLink control)
1 Connect the audio cables (not supplied)
to the AUDIO IN-AUX1 jacks on this
Home Theater System and the AUDIO
output jacks on the TV.
Note
To listen to the audio output from this•
connection, press AUDIO SOURCE
repeatedly until ‘AUX1’ is displayed on the
display panel.
AUDIO OUT
AUX 1
AUDIO IN
1 Connect the speakers and subwoofer to
the matching jacks on this Home Theater
System.
Note
Ensure that the colors of the plugs and jacks•
are matched.
Connect radio antenna
1 Connect the FM antenna to the FM75
jack on this Home Theater System
(for some models, this cable is already
connected).
2 Extend the FM antenna and x its ends to
the wall.
Tip
For better FM stereo reception, connect to an•
external FM antenna.
FM (75 Ω)
ANTENNA
EN

13
Connect to coaxial jack
1 Connect a coaxial cable (not supplied)
to the DIGITAL-IN-COAXIAL jack
on this Home Theater System and the
COAXIAL/DIGITAL output jack on the
device.
Note
To listen to the audio output from this•
connection, press AUDIO SOURCE
repeatedly until ‘COAX IN’ is displayed on the
display panel.
Connect to optical jack
1 Connect an optical cable (not supplied) to
the DIGITAL-IN-OPTICAL jack on this
Home Theater System and the OPTICAL/
SPDIF output jack on the device.
COAXIAL
DIGITAL OUT
COAXIAL
DIGITAL IN
DIGITAL IN
OPTICAL
DIGITAL OUT
OPTICAL
Connect audio from a cable box,
recorder or games console
You can choose to connect to analog or digital
jacks depending on the device capabilities.
1 Connect the audio cables (not supplied)
to the AUDIO IN-AUX2 jacks on this
Home Theater System and the AUDIO
output jacks on the device.
Note
To listen to the audio output from this•
connection, press AUDIO SOURCE
repeatedly until ‘AUX2’ is displayed on the
display panel.
AUX 2
AUDIO OUT
AUX 2
AUDIO IN
English
EN

14
Connect USB device
1 Connect the USB device to USB jack
on this Home Theater System.
Note
This Home Theater System can only play/view•
MP3, WMA, DivX (Ultra) or JPEG les that are
stored on such devices.
Press
• USB to access the content and play the
les.
Connect power cord
Warning
Risk of product damage! Ensure that the•
power supply voltage corresponds to the
voltage printed on the back or the underside
of the product.
Before any connection to power outlet, set the
•
voltage selector (at the rear or bottom of this
product) to the local power line voltage.
1 Connect the power cord to the power
outlet when all the required connections
are done.
The product is ready to be set up for»
use.
Note
To listen to the audio output from this•
connection, press AUDIO SOURCE
repeatedly until ‘OPTI IN’ is displayed on the
display panel.
Connect portable media player
1 Connect a 3.5mm stereo audio cable (not
supplied) to the MP3 LINK jack on this
Home Theater System and the phone
jack on the portable media player (such as
MP3 player).
Note
To listen to the audio output from this•
connection, press AUDIO SOURCE
repeatedly until ‘MP3 LINK’ is displayed on the
display panel.
MP3
EN

15
Navigate through the menu
1 Point the remote control directly at the
remote sensor on the Home Theater
System and select the desired function.
2 Press the following buttons on the
remote control to navigate through the
on-screen menus.
Button Action
Move up or down
Move left or right
OK Conrm a selection
Enter numbers
Find the correct viewing
channel
1 Press to turn on this product.
2 Press DISC to switch to disc mode.
3 Turn on the TV and switch to the correct
video-in channel in one of the following
ways:
Go to the lowest channel on your•
TV, then press the Channel Down
button until you see the Philips
screen.
Press• SOURCE button repeatedly
on the remote control of your TV.
4 Get started
Insert the remote control
batteries
1 Slide the battery cover off the back of the
remote control.
2 Insert the 2 supplied batteries (AAA). Be
sure the + and - ends of the batteries line
up with the markings inside the case.
3 Slide the cover back into position.
Note
Do not mix batteries (old and new or carbon•
and alkaline, etc.).
Remove batteries if they are exhausted or if
•
the remote control is not to be used for a long
time.
Batteries contain chemical substances, they
•
should be disposed of properly.
Control a play source
1 Press RADIO, USB or DISC button to
select the source you wish to control.
2 Select the desired function (for example
, ).
English
EN

16
Tip
You can set the default language for DVD disc•
menu (see ‘Adjust settings’ > ‘Preferences’ >
[Disc Menu]).
Turn on Progressive Scan
If the TV supports progressive scan output, you
can connect this Home Theater System and the
TV using component video connection. (see
‘Connect video cables’ > ‘Option 2: Connect to
the component video jack’).
1 Turn on the TV and ensure that the TV
progressive scan mode is deactivated (see
the TV user manual).
2 Switch the TV to the correct viewing
channel for this Home Theater System.
3 Press DISC.
4 Press SETUP.
5 Press to select [Video Setup] in the
menu, then press .
6 Select [Progressive] > [On], then press
OK.
A warning message is displayed.»
7 To proceed, select [Ok] and press OK.
The progressive setup is complete.»
Video Setup
Picture Setting
Closed Caption
HDMI Setup
TV Display
TV System
Screen Fit
Progressive
On
Off
Tip
The video-in channel is between the lowest•
and highest channels and may be called
FRONT, A/V IN, VIDEO, HDMI etc. See the
TV user manual on how to select the correct
input on the TV.
Select menu display language
Note
Skip this setting if this product is connected•
to a HDMI CEC compliant TV. It switches
automatically to the same OSD menu language
as per your TV setting.
1 Press DISC.
2 Press SETUP.
»[General Setup] menu is displayed.
3 Press .
4 Press to select [OSD Language] in
the menu, then press .
The language options are different•
depending on your country or
region. It may not correspond to the
illustration shown here.
5 Press to select a language, then press
OK.
General Setup
Screen Saver
Disc Lock
EasyLink Setup
Display Dim
DivX(R) VOD Code
Sleep Timer
ᇓ໗ࡩ฼
ɻʼᐥ᛽
English
Melayu
Русский
ไทย
OSD Language
Auto
EN

17
To set the speakers level
1 Select [Speakers Volume] in the menu,
then press .
2 Press to change the volume level,
then press OK.
The test tone is emitted from the»
speaker.
Repeat the above setting for other•
speakers until all the speakers output
level sounds equally balance.
To exit the menu, press• SETUP.
To set the output delay time (center and rear
speakers only)
1 Select [Speakers Delay] in the menu,
then press .
2 Press to set the delay time, then press
OK.
Repeat the above setting for other•
speakers until the sound output from
different speakers reach the listening
position at the same time.
To exit the menu, press• SETUP.
Speakers Volume Setup
Front Left
Front Right
Center
Subwoofer
Rear Left
Rear Right
0dB
0dB
0dB
0dB
0dB
0dB
Speakers Distance Setup
Center
Rear Left
Rear Right
0MS
0MS
0MS
Note
If a blank/distorted screen is displayed, wait for•
15 seconds for the auto recover.
If no picture displayed, turn off the progressive
•
scan mode as follows: 1) Press to open
the disc compartment. 2) Press . 3) Press
AUDIO SYNC.
8 Press SETUP to exit the menu.
9 You can now turn on the progressive scan
mode on the TV.
Note
If distorted picture is displayed, turn off the•
progressive scan feature on this product and
TV.
Change speaker settings
Ideally, the distance between listening position
and all the speakers should be the same. If not,
change the speaker settings based on their
distance from the listening position to obtain
the best possible surround sound.
1 Press DISC.
2 Press SETUP.
3 Press to select [Audio Setup] in the
menu, then press .
If the speaker setup option is not•
accessible, press twice before you
press SETUP.
CD Upsampling
Speakers Delay
Speakers Volume
HDMI Audio
Audio Setup
Audio Sync
English
EN

18
One-touch standby
When you connect your product to devices
that support one-touch standby, you can use
your product remote control to switch your
product and all connected HDMI devices to
standby mode. You can perform one-touch
standby using the remote control from any of
the connected HDMI devices.
System audio control
When you connect your product to HDMI
CEC compliant devices, your product can
switch automatically to play audio from the
connected device.
To use one-touch audio, you must map the
audio input from the connected device to
your product.
You can use the remote control from the
connected device to adjust the volume.
Audio Input Mapping
When you map the audio input correctly, this
Home Theater System switches to the audio
from the played device automatically.
Map the devices to the audio inputs
Note
Before you start, ensure that the audio output•
of the HDMI TV and other HDMI devices have
been connected to the audio input jacks on
this Home Theater System.
OSD Language
Sleep Timer
Screen Saver
Disc Lock
Display Dim
General Setup
DivX(R) VOD Code
EasyLink
One Touch Standby
System Audio Control
Audio Input Mapping
One Touch Play
EasyLink Setup
Tip
Set a longer delay time if the center speaker or•
rear speaker is closer to the listening position
than the front speaker.
Allow 1ms setting for every 1 foot distance
•
between the speaker and the listening position.
Use Philips EasyLink
Your product supports Philips EasyLink, which
uses the HDMI CEC (Consumer Electronics
Control) protocol. EasyLink-compliant devices
that are connected through HDMI connectors
can be controlled by a single remote control.
Note
Philips does not guarantee 100%•
interoperability with all HDMI CEC devices.
1 Turn on the HDMI CEC operations on
the TV and other connected devices. See
TVs/devices manual for details.
2 You can now enjoy the following Philips
EasyLink controls.
EasyLink
You can turn off or turn on all EasyLink
features.
One-touch play
When you connect your product to devices
that support one-touch play, you can control
your product and the devices with one
remote control. For example, when you
press Play on your DVD remote control, your
TV automatically switches to the correct
channel to show the DVD content.
To enable One-touch play, a video disc must
be placed in the disc compartment before
operation.
EN

19
Select a play source
On the main unit
Press• SOURCE button repeatedly to
select: DISC > USB > FM >AUX 1 >
AUX 2 > COAX IN> OPTI IN > MP3
LINK > DISC ...
On the remote control
Press• AUDIO SOURCE repeatedly to
switch to the connected audio source:
Display Device connected to
AUX 1 AUDIO IN-AUX1 jacks
AUX 2 AUDIO IN-AUX2 jacks
COAX IN DIGITAL IN-COAXIAL
jack
OPTI IN DIGITAL IN-OPTICAL jack
MP3 LINK MP3 LINK jack
Press• RADIO to switch to FM band.
Press• USB to switch to USB mode.
Press• DISC to switch to disc mode.
1 Press DISC.
2 Press SETUP.
»[General Setup] menu is displayed.
3 Press .
4 Select [EasyLink Setup], then press .
• [One Touch Play] and [One Touch
Standby] functions are turned on by
default in the factory.
5 Select [System Audio Control] > [On],
then press OK to start scanning devices.
Once complete, audio input mapping»
menu is displayed.
For example, if the TV audio is
connected to the AUX1 jack on this
Home Theater System, select [Aux1]
and map with the TV (brand name) at
the right panel.
6 Select the audio input of this Home
Theater System that is used to connect to
other HDMI device (e.g. AUX1, AUX2),
then press .
7 Select the correct connected device, then
press OK.
Repeat steps 5~7 to map other»
connected devices.
8 Press SETUP to exit the menu.
Aux 2
Audio Input Mapping
Aux 1 [TV]
other (Non-HDMI)
[DVD 3400]
Coaxial In
Optical In
English
EN

20
Play video
Note
For video disc, playback always resumes from•
the point where it was last stopped. To start
play from the beginning, press while the
message is displayed.
Control video play
1 Play a title.
2 Use the remote control to control the
title.
Button Action
Starts, pauses or resumes
playback.
Stops play.
Skips to the next title or chapter.
Skips to the beginning of the
current title or chapter. Press
twice to jump to the previous
title or chapter.
/ Searches fast-forward (right)
or fast-backward (left). Press
repeatedly to change the search
speed.
In pause mode, slow motion•
backward or forward play.
/ Searches slow-forward (down)
or slow-backward (up). Press
repeatedly to change the search
speed.
For VCD, only slow-forward•
play is possible.
5 Play
Play a disc
Caution
Never place any objects other than discs into•
the disc compartment.
Never touch the disc optical lens inside the
•
disc compartment.
1 Press to open the disc compartment.
2 Insert a disc with its label facing up.
For double-sided disc, load the side•
to play faces up.
3 Press to close the disc compartment
and start disc play.
To view disc play, turn on the TV to•
the correct viewing channel for this
Home Theater System.
To stop disc play, press• .
Note
Check the types of discs supported. (see•
‘Specications’ > ‘Playback media’).
If the password entry menu is displayed, enter
•
the password before you can play the locked
or restricted disc.
If you pause or stop a disc for about 5 minutes,
•
the screen saver activates. To deactivate the
screen saver, press DISC.
After you pause or stop a disc and no buttons
•
are pressed within 15 minutes, this product
automatically switches to standby mode.
EN