Philips HTS3548W User manual

3Enjoy DVD HOME THEATRE SYSTEM
Quick Start Guide
Connect
Set up
Enjoy
1
2
3
What’s in the box?
Start disc playback
APress OPEN/CLOSE çto open the disc tray.
BPlace a disc with the disc label facing up.
CPress OPEN/CLOSE çto close the disc tray.
DPlayback starts automatically.
EIf the disc menu appears on the TV, use
  keys or the numeric keypad to
select an option in the menu and press OK
to start playback.
zTo enjoy the powerful surround sound
from the speakers, press SURROUND
on the remote control to turn on the
multi-channel surround mode.
FPress to stop playback.
Note When you press ubutton, playback
resumes from where it last stopped. To start
playback from the beginning, you have to press .
Playback other supported
devices
USB device
AInsert your USB device to the USB socket.
BPress DISC/USB to switch to ‘USB’ mode.
CPress uto start playback.
DTo stop playback, press DISC/USB to switch to
‘DISC’ mode. You can unplug your USB device now.
USB
MP3 LINE-IN
Other portable audio player
AUse the supplied MP3 LINE-IN cable to connect the
headphone output socket on your portable audio
player to MP3 LINE-IN socket.
BPress PLAY on your portable audio player.
CPress MP3 LINE-IN to listen to the playback.
-
HTS3548W
User
Manual
1 centre, 2 front, 2 rear speakers
and subwoofer
FM wire
antenna
AM/MW
loop antenna
MP3 LINE-IN cable
Need help?
User Manual
See the user manual that came with your Philips DVD Home Theatre System.
Online
Go to www.philips.com/welcome 2007 CKoninklijke Philips N.V.
All rights reserved.
www.philips.com
Main Unit Remote Control
and 2 batteries
Composite
video cable
Power cables
(2x)
Wireless receiver Wireless transmitter
Troubleshooting
For more troubleshooting tips, see the user manual.
No picture.
• Press DISC/USB on the remote control.
• Check the connection to the TV and ensure the plugs are rmly in place.
No sound.
• Check the speaker connections and settings.
• Check the audio connections and press SOURCE to select the correct input source.
• Press SURROUND to turn on the multi-channel surround output.
If the indicator on the wireless transmitter blinks continuously for more than one minute.
• Press and hold CONNECT button on the wireless transmitter for 5 seconds. Turn on the wireless receiver.
Screws and Allen key
(for connecting the
tall speakers)
hts3548w_98qsg_eng2.indd 1hts3548w_98qsg_eng2.indd 1 2007-05-02 10:49:01 AM2007-05-02 10:49:01 AM

1Connect
A
Placement
Proper speakers system placement is important to
ensure optimum sound performance.
FRONT
RIGHT
FRONT
LEFT
CENTER
REAR
RIGHT
REAR
LEFT
SUBWOOFER
APlace the centre speaker above or close to the TV.
BPlace the subwoofer on the floor, at least one metre
away from the TV.
CPlace the front speakers at equal distances from the
TV.
DPlace the rear speakers at the back or beside the
listening position.
EPlace the wireless receiver at the back of the room
facing the wireless transmitter at the main unit.
B
Connect the main unit to TV
Pr
COAXIAL
CVBS
S-VIDEO
Pb
Y
VIDEO OUT
VIDEOIN
(CVBS)
VIDEO IN
(CVBS)
zConnect a composite video cable (supplied) from the
CVBS socket on the main unit to the VIDEO IN
socket on your TV.
Note It is important to connect the main unit
directly to your TV.
2Set up
C
Connect the wireless transmitter to
the main unit
WIRELESS
TRANSMITTER
WIRELESS
TRANSMITTER
zConnect the wireless transmitter to the WIRELESS
TRANSMITTER socket at the rear of the main unit.
D
Connect the speakers and
subwoofer
WIRELESS
TRANSMITTER
AConnect the tall speakers, secure it with the supplied
screw using the Allen key.
BConnect the subwoofer, front and centre speakers
to the same coloured sockets at the rear of the main
unit.
CConnect the rear speakers to the same coloured
sockets at the bottom of the wireless receiver.
A
Finding the viewing channel
APress 2(STANDBY ON) on the main unit to turn
it on.
BTurn on the TV. Use the TVs remote control to
select the correct viewing channel.
STANDBY-ON
Note To search for the correct viewing channel,
press the Channel Down button on the TVs remote
control repeatedly (or AV, SELECT, °button) until
you see the Video In channel.
B
Select the display language on the
screen
APress SETUP.
The { General Setup Page } appears.
General Setup Page
Disc Lock
Display Dim
Program
OSD Language
Screen Saver
Sleep
DivX(R) VOD Code
English
Melayu
Русский
ไทย
BPress to select { OSD Language } and press .
CUse  keys to select a language option in the
menu and press OK to confirm.
DPress SETUP to exit.
Note The language set here is only for the menus
that are shown on the TV while operating this Home
Theatre system, not for the DVD disc menu.
There are various setup options (Audio Setup, Video
Setup, Preference Setup) available on this Home Theatre
System. Refer to the user manual for more information.
E
Connect the radio antennas and
power cable
Keep the antennas away from the electronic devices to
prevent unwanted interference.
A
C
B
WIRELESS
TRANSMITTER
AConnect the FM antenna to the inner pin of the
FM 75 socket. Extend the wire for optimum
reception.
BUnfold the AM/MW loop antenna and fix the claw
into the slot. Push the tabs and insert the wires into
the AM/MW sockets.
CConnect the power cables from the main unit and
wireless receiver to the AC power outlet.
F
Connect audio output from TV
(optional)
To hear the TV audio through this home theatre system,
use a red and white audio cables (not supplied) to
connect the AUDIO IN-TV sockets on the main unit to
the AUDIO OUT sockets on your TV.
AUDIO
OUT
AUDIOIN
WIRELESS
TRANSMITTER
AUDIO
OUT
AUDIO OUT
Note Press TV on the remote control to get the
sound output from the speakers system when watching
the TV programmes.
Main Unit (rear)
Television (rear)
Main Unit (rear)
Main Unit (rear)
FM antenna
AM/MW antenna
SETUP
Television
(rear)
Main Unit (rear)
SUBWOOFER
FRONT
RIGHT
FRONT
LEFT
REAR
RIGHT
REAR
LEFT
FRONT CENTER
WIreless
Receiver
(botom)
hts3548w_98qsg_eng2.indd 2hts3548w_98qsg_eng2.indd 2 2007-05-02 10:49:05 AM2007-05-02 10:49:05 AM