Philips STH3000 User manual

STH3000
STH3010
EN User manual SC 用户手册
Please read this instruction carefully
before using the appliance.
使用产品前请仔细阅读本使用说明书。
Please keep this instruction book for future reference.
保留备用。

3
4
5
7
8
9
10
11
14
2

3

4

5
7 8
3
1
6
154
2Distilled/
Demineralized water
50%50% 㧥亼Ⅱ
䒜ࡃⅡ

6
EN The appliance is suitable to be used with tap water. However,
if you live in an area with hard water, we recommend that
you mix an equal amount of tap water with distilled or
demineralized water. This will prevent fast scale build up and
prolong the lifetime of the appliance.
Warning: Do not add perfume, water from tumble dryer,
vinegar, magnetically treated water (e.g., Aqua+), starch,
descaling agents, ironing aids, chemically descaled water
or other chemicals as they may cause water spitting, brown
staining or damage to your appliance.
SC 本产品可使用自来水。但如果您居住的区域水质较
硬，我们建议您将等量的自来水与蒸馏水或软化水
混合使用。这样可以防止水垢快速积聚，从而延长
产品的使用寿命。
警告：请勿加入香水、转筒式干燥机中的水、醋、
磁处理水（例如 Aqua+）、淀粉、除垢剂、熨衣
剂、化学除垢水或其他化学物质，这些会造成喷
水、留下棕色污渍或损坏产品。

7
1
4
2
30 sec.
30 ⻿
34
4
5

8

9
3
260 NJO
60 ܳ䧌
11

10
2
1
6
4
7
5
3

11
EN
Problem Possible cause Solution
The appli-
ance does
not heat up.
The appliance is not
plugged in properly
or not switched on.
Check if the mains plug
is inserted properly
and its wall socket is
working.
Check if the appliance
is switched on.
The
appliance
does not
produce
any steam.
The appliance is not
plugged in properly
or not switched on.
Check if the mains plug
is inserted properly and
its wall socket is working.
Check if the appliance
is switched on.
The appliance has
not heated up
suciently.
Let the appliance heat
up ≈30 seconds
(‘steam-ready” light will
be on). When the
appliance is ready for
use, the light turns o.
You have not
pressed the steam
trigger fully.
Press the steam trigger
fully for a few seconds.
The water level in
the water tank is too
low or it has all
been used up.
Unplug the appliance
and rell the water tank.

12
Problem Possible cause Solution
Steam plate is
placed in a
horizontal position.
Use the appliance
vertically, wait for a few
seconds for the steam
to be released.
Water
droplets
drop from
the
appliance
steamer
head.
The appliance has
not been fully
heated up.
To allow the appliance
to fully heat up.
The
appliance
produces a
pumping
sound/the
handle
vibrates.
Water is pumped to
the steamer head to
be converted into
steam.
This is normal.
The water level in
the water tank is too
low or it has all
been used up.
Unplug the appliance
and rell the water tank.
Steamer
head and/
or handle is
wet.
Filling door is not
fully inserted.
Detach the tank and
ensure lling door has
been fully inserted.
The tank has been
overlled with water
residue around it.
Wipe o the water
residue left on tank.

13
SC
问题 可能的原因 解决方法
产品无法加热。 产品未正确插
入电源插头或
未打开电源。
检查电源插头是否正
确插入，以及墙壁插
座是否正常工作。
检查是否已打开产品
电源。
蒸汽挂烫机不能
产生蒸汽
产品未正确插
入电源插头或
未打开电源。
检查电源插头是否正
确插入，以及墙壁插
座是否正常工作。
检查是否已打开产品
电源。
产品未充分
加热。
让产品加热约 30 秒
（“蒸汽就绪”指示
灯将亮起）。当产品
可供使用时，指示灯
将关闭。
您没有完全按
下蒸汽开关。
完全按下蒸汽开关数
秒钟。
水箱中的水位
太低或水已
用完。
拔掉产品的电源插
头，然后为水箱
加水。
蒸汽面板放
在了水平位
置上。
垂直使用产品，等待
几秒钟以释放蒸汽。

14
问题 可能的原因 解决方法
有水滴从产品
的蒸汽喷头中
滴出。
产品未完全
加热。
将产品完全加热。
产品会产生抽水
声/手柄震动。
水被抽到蒸汽
喷头以转化为
蒸汽。
这是正常的。
水箱中的水位
太低或水已
用完。
拔掉产品的电源插
头，然后为水箱
加水。
蒸汽喷头和/或
手柄潮湿。
注水口未完全
插入。
拆下水箱，并确保
注水口已完全插入。
水箱注水过
满，上面有
积水。
擦去水箱上的
积水。

产品： 飞利浦手持式蒸汽熨烫刷
型号： STH3000, STH3010
额定电压： 220 V～
额定频率： 50 Hz
额定输入功率： 1000 W
生产日期： 请见产品本体
产地： 中国浙江慈溪
飞利浦（中国）投资有限公司
上海市静安区灵石路 718 号A1 幢
全国顾客服务热线: 4008 800 008
本产品根据国标 GB4706.1-2005,
GB4706.84-2007 制造
保留备用
发行日期：200911

©2020 Koninklijke Philips N.V.
All rights reserved.
4239 001 19751