Philips ALETTA AL1T5 User manual

Lighting Systems ALETTA AL1T5
Page 1 of 2 Louver Shield, 1 T5 Lamp per Fixture, Grid Mounted
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2010 Philips Group •
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
D1007
Features
1. Housing: 23 gauge pre-painted steel. 20 gauge available, consult factory.
2. Lamp: One T5, T5HO. (by others)
3. Faux Housing: Extruded Frosty acrylic.
4. Louver: High purity Semi-Specular, 2-3/4" (6.99cm) opening x 1-3/8" (3.49cm)
deep on 2" (5.08cm)ctrs with micro-prismatic side overlays. Elongated lens
openings are 22" (55.88cm) windows.
5. Performance Kick Reflector: .020" (0.05cm) 95%-98% reflective, UV
resistant polypropylene.
6. Trim: Extruded aluminum trim, painted white, interfaces with ceiling grid or
plaster frame by others.
Electrical
Ballasts are electronic and high power factor. Dimming ballasts are available on
many lamp types, please consult factory regarding specific applications. 1325
max lumen battery pack is standard. See application table on page 2 for output
with specific lamp types. Continuous luminaires utilize 12 gauge through wires.
Factory installed ballast disconnect allows the ballast to be disconnected from and
reconnected to incoming power under load without turning the entire circuit off.
Mounting
Housing is suspended by hanger wires and laid into standard or slot-T grid ceiling.
Mounting accessory available for drywall installations (see page 2).
Labels
UL, cUL and I.B.E.W.
Ordering Instructions
Individual Fixtures:
1. Order quantity of Individual Units required.
Continuous Runs:
1. Order one Starter and one Ender fixture per run.
2. Order appropriate quantity of Joiner fixtures.
Continuous runs only - Prior to installing Aletta in a grid ceiling, the installing
contractor must ensure that the fixture will set into two main runners, spaced 2'
(60.96cm) on center. No grid cross members are required except at the beginning
and end of the run.
7.00”
(17.78cm)
23.00”
(58.42cm)
2.00”
(5.08cm)
2.75”
(6.99cm)
24.00” (60.96cm)
5.28”
(13.41cm)
7.00”
(17.78cm)
12 53 46
Louver w/ Elongated
Lens Detail
* For dimming, use "D" option. If "D" is not selected, ballast will be static.
Ordering Information
Family Shielding Length Lamps Lamp Type Ballast Factor Voltage Housing Option
A1
Aletta LE = Louver w/
Elongated Lens
2 = 2' (60.96cm)
4 = 4' (121.92cm)
1 = 1 Lamp T5 = T5 Standard
Output
HO = T5 High
Output
10 = *1.0 T5,
HO Dimming
and Static
11 = 1.15 T5
1 = 120v
2 = 277v
3 = 347v
U = Individual Unit
S = Starter
J = Joiner
E = Ender
D = Dimming
E = EM Pack
2 = 2 Circuit
4 = 4 Through Wire
5 = 5 Through Wire

Lighting Systems ALETTA AL1T5
Page 2 of 2 Louver Shield, 1 T5 Lamp per Fixture, Grid Mounted
Job Information Type:
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2010 Philips Group • D1007
Performance
COEFFICIENTS OF UTILIZATOIN
% EFFECTIVE CEILING CAVITY REFLECTANCEE
CANDLEPOWER CURVE
80 70 50
WALLREFLECTANCE
70 50 30 70 50 30 50 30 10
0 83 83 83 81 81 81 78 78 78
1 77 74 71 75 72 70 69 67 65
2 71 65 61 69 64 60 61 58 55
3 65 58 53 63 57 52 55 51 47
4 60 52 47 58 51 46 50 45 41
5 56 47 42 54 47 41 45 40 37
6 52 43 37 51 43 37 41 36 33
7 48 40 34 47 39 34 38 33 30
8 45 36 31 44 36 31 35 30 27
9 43 34 28 42 33 28 33 28 25
10 40 31 26 39 31 26 30 26 23
20% FLOOR CAVITY REFLECTANCE
ZoneLumens % Lamp % Luminaire
0-90 3500 70.0 100
0-180 3500 70.0 100
DISTRIBUTION
REPORT NO.: ALE41T5.IES
LAMPS: 1 FP54/835/HO
LUMENS: 4450*
EFFICIENCY: 70.0%
* 25°C Rating
Lamp
Length
Lamp
Type
Lamp Rated
Output
Lamp
Wattage
Battery
Lumen Output
4’
(121.92cm)
CANDLEPOWER
ZONE 0 22 45 67 90
DEG. T5HO 4450* 54 1250*
4’
(121.92cm) T5 2600* 28 1325*
CANDELAS
0 1859 1859
4’
(121.92cm) T8 2950 32 1100
1859 1859 1859
5 1851 1854 1851 1851 1850
2’
(60.96cm) T5HO 1750* 24 725*
15 1736 1753 1791 1804 1785
25 1539 1581 1473 1259 1124
35 1281 1285 880 766 750
45
2’
(60.96cm) T5 1200* 14 750*
958 807 606 627 631
55 517 448 459 477
2’
(60.96cm) T8 1350 17 650
491
* 25˚C Rating
65 264 274 307 379 403
75 130 155 215 268 271
85 29 46 43 45 40
90 0 0 0 0 0
Mounting Accessory
Drywall Conversion Kit
For Individual Units only
FK92X2 – Conversion Kit for 2’ (60.96cm) Unit
FK92X4 – Conversion Kit for 4’ (121.92cm) Unit
EM Pack Output Table
ROOM CAVITY RATIO