Philips DreamStation 2 User manual

Patient
quick start guide
DreamStation 2
CPAP Advanced
Auto CPAP Advanced
© 2021 Koninklijke Philips N.V. All rights reserved. Specications are subject to change without notice.
Trademarks are the property of Koninklijke Philips N.V. or their respective owners.
www.philips.com/respironics
Respironics Inc.
1001 Murry Ridge Lane
Murrysville, PA 15668 USA
1149265
1149265 R02
ZL 02/15/2021

“
Connecting to DreamMapper
Sync your device to your tablet or mobile phone using the
DreamMapper app, available in the App Store and Google Play.
With the device and mobile phone powered up and in close
proximity, initiate Bluetooth setup and pairing in DreamMapper.
Follow the pairing instructions in DreamMapper.
A 6-digit PIN will appear on the DreamStation 2 screen.
Depending on your phone, you will need to either enter the
PIN into DreamMapper or tap “Pair” on the device screen
within 30 seconds to complete the pairing.
The screen displays Pairing to Device” and then “Success:
Device is now paired.”

“
Get started with therapy
To begin therapy, press the Therapy button.
A blue ring indicates therapy is on.
Interactive touchscreen
Humidifcation icon
Therapy button
Customize your settings
Ramp Plus
Humidifcation (if available)
Heated tube temperature (if available)
The Ramp Plus feature allows you to set a comfortable starting
pressure while you fall asleep.
1. Tap the humidifcation icon to view your current setting.
2. Tap again until you reach a preferred moisture level.
Humidication can be turned o or set from 1 (minimum)
to 5 (maximum).
1. Tap the heated tube icon to view your current temperature setting.
2. Tap again until you reach your preferred temperature. Heat can be
turned o or set from 1 (minimum) to 5 (maximum).
1. Tap the Ramp Plus icon to view and adjust your Ramp Plus pressure.
2. Tap the +or - symbols until you reach a comfortable setting.
Ramp Plus settings can be turned o or set from 4 to 10 cm H2O.
3. Tap Confrm” to save the setting.
Once humidifcation is set, it will be saved and
automatically activated for future therapy sessions.
Once the temperature is set, it will be saved and automatically
activated for future therapy sessions.
Once Ramp Plus is set, it will be saved and automatically activated for
future therapy sessions without tapping the Ramp Plus icon again.
Therapy pressure
A solid ring indicates
prescription pressure is
being delivered. A dotted
ring indicates Ramp Plus
pressure is being delivered.
Ramp Plus icon
Heated tube
temperature icon
Note: If the screen goes
dark after 60 seconds
of inactivity, simply tap
it to wake up the device
if you want to make
further changes. This
will also simultaneously
restart Ramp Plus.

-
-
“
’
“ ”
Therapy data summary
To stop airow, press the Therapy button. A summary of your therapy data will be
displayed. Access to certain information will depend on what your provider has set.
Information in blue indicates that you
can tap to learn more or take action.
Last Session screen
The AHI screen displays the Apnea Hypopnea
Index (AHI) value for the most recent one day
time frame (if enabled by your provider).
The Days 4hrs+ screen displays the total number
of sessions lasting 4+ hours that you ve had in the
past 30 days. Once you have reached your goal,
Complete will be displayed.
The Usage Hours screen displays the amount
of time you received therapy in hours and
minutes during your last 3 sessions.
The Mask Fit screen displays how your mask
t during your last session. You can also run
a Mask Fit check. Put on your mask and tap
Start” to initiate the Mask Fit check.

“ ’
“
”
Settings
Comfort, device, and data
Access to certain information will depend on what your provider has set.
To make adjustments to settings and to access
additional information, tap Settings.”
Adjust available Comfort settings. Information in
blue indicates that you can tap to make changes.
a. Ramp Plus time and pressure
b. Humidity
c. Heated tube (if available)
d. Tube size
e. FLEX
Swipe up to view additional device information
like adjusting airplane mode, clearing Bluetooth
pairings, and resetting time or language.
Tap on the information in blue to make changes.
You can also view the device s serial number,
software version, and modem status.
Tap View Reports” to select a date range and
view additional therapy data summaries.
To exit out of Settings at any time, tap “Back
to return to the Last Session screen.
Consult your User Manual for detailed troubleshooting information.