Philips PET7432/05 User manual

2Connect the AC adaptor cable to the DC
IN Jack on the main unit and the power
outlet.
3Switch on the TV and set to the correct
video-in channel.
➜You can consult the owner's manual of
your TV. (If your TV does not have Audio
and Video inputs, you will need to
purchase a RF modulator. Please consult
your dealer.)
1Attach the main unit and the second screen
to the back of the front seat headrests.
2Connect the supplied AV cable to the AV
OUT jack on the main unit and the AV IN
jack on the second screen.
3Connect the supplied car adaptor cable to
the DC IN jacks on the main unit and the
second screen, and to the car cigarette
lighter socket.
Prepare (for in-car use)
1
Quick start guide
Philips Portable DVD Player PET7432
1Slide the ON/OFF switch to ON to switch
on the main unit.
2Slide OPEN 2on the main unit.
3Remove the protective card (if any) and load
a disc with the label side facing up.
4Close the disc compartment.
➜Playback will start automatically. If not,
press 2;/OK.
5To stop playback, press 9.
2Enjoy
Note:
During play, you can:
– Press OPTION to select some play options:
audio, subtitle, repeat, and time display.
– Press BRIGHTNESS on the main unit or
rotate BRIGHTNESS -/+ on the second
screen to adjust brightness of screen to match
lighting conditions.
1Prepare (for domestic use)
Connect additional equipment (TV for
example)
1Connect the AV OUT socket on the main
unit to the video and audio sockets on a TV
as shown directly.
Printed in China WK0911
TV
Main unit
Red
Yellow
Not supplied
Second screen
AV cable
Car adaptor
cable
Cigarette
lighter
White
Note:
– This portable DVD player is designed with a
built-in lithium battery to supply power to the
player when you are on travel(charging of the
DVD player only possible in the power-off
mode).
PET7432-Eng_QSG.qxd 3/17/09 11:34 Page 1