Philips FC8130/01 User manual

ServiceManual
Philips Consumer Lifestyle
Published by Philips Consumer Lifestyle Printed in the Netherlands © Copyright reserved Subject to modification
Vacuum cleaner
FC8130/01
15/05 Version 1.4
PRODUCT INFORMATION
- This product meets the requirements regarding
interference suppression on radio and TV.
- After the product has been repaired, it should function
properly and has to meet the safety requirements as
officially laid down at this moment.
TECHNICAL INFORMATION
- Color : Pistil Red
- Power consumption : 1800 W
(IEC) 230 V
- Maximum Air displacement : 42 l/s
- Dust storage capacity : 3 L
- Cord length (depending on type) : 7 m
- Filter system : Double layered
S-Bag
: Permanent motor
protection filter
: HEPA 10
exhaust filter
- Noise : < 80 dB
ACCESSORIES
- Nozzle : All purpose floor nozzle
- Additional nozzle : Parquet nozzle
- Tubes : Metal Telescopic tube
- Accessories : Crevice nozzle and small nozzle
- Accessory Storage : Tube clip
- Coupling : Conical coupling
OPTIONAL (accessories)
- HEPA exhaust filter : FC8070 (8838 070 01010)
- FC8021 : S-bag Classic
- FC8022 : S-bag Clinic
- FC8023 : S-bag Anti-Odor

FC8130/01
2-8
DISASSEMBLY- AND RE-ASSEMBLY ADVISE
- First remove the dust container.
- Remove the dustcover using a screwdriver (see picture).
- When the dustcover has been removed, 3 of the 7 screws D
that need to be unscrewed to disassemble the upper
housing, are accessible (see picture).
D
D
D
- The 4th screw Dis hidden under the 0/I button, to remove
the button use a screwdriver (see picture)
D
- Finally the last 3 screws Dthat need to be removed are
situated at the bottom side of the appliance (see picture).
D
D
D
- During re-assembling, take care all the wires are positioned
in the guides correctly.
REPAIR INSTRUCTION
- The spare parts have been standardized as much as possible.
- Depending on the original cord, the spare cord must be
shortened to the length of the original cord.
-Item 36, air valve, opens to cool the motor if the air
displacement is too low or if the airflow is blocked.

FC8130/01
3-8
PARTS LIST
ELECTRICAL DIAGRAM
Blue
Blue
Red
Red
Brown
Cord
Winder
Main PCB
230 V
LED PCB
Sensor
PCB
M
Switch
Pos Service code Description
1
2
3
4
5
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
4222 459 51051
4222 459 51071
4222 459 49021
4222 459 48701
4322 004 93721
4222 459 46441
4222 459 51131
4222 459 51211
4222 459 46271
4222 459 51151
4222 459 46341
4222 459 51961
4222 459 51161
4222 459 50981
4222 459 46581
4222 459 51181
4222 459 50961
4222 459 46451
4222 459 51111
4222 459 46221
4222 459 52101
4222 459 46381
4222 459 50941
9965 100 56857
Dustcover assy Pistil Red
Dustcover latch kit Pistil Red
Seal for suction
Dustbag holder assy
Reusable dustbag
Anti missing protector kit
Front wheel kit Pistil Red
Right side panel Ink Black
Inlet filter
Inlet filter frame Pistil Red
Dustchamber seal
Safety valve kit
Left side panel Ink Black
Button on/off Sour Cherry
Button spring
Mid frame assy Pistil Red
Button CW Sour Cherry
Sealing Motor front cover
Filter panel Pistil Red
Outlet HEPA assy
Cordw. compl. 2000 W Europe
Cordwinder complete UK/HK
Back wheel assy Pistil Red
Motor cover
Pos Service code Description
28
29
30
31
32
33
34
36
37
38
39
42
45
46
47
49
50
51
52
53
54
4222 459 46321
4222 459 46331
4222 459 51971
4222 459 46411
4222 459 46371
4222 459 46521
4222 459 51201
4222 459 51991
4222 459 52001
4222 459 46511
9965 100 56858
4222 459 46571
4222 459 46591
4322 004 25121
4322 004 25111
4322 004 25101
4322 004 25701
4322 004 25071
4322 004 25201
4322 004 25141
4222 459 49161
4222 459 54601
LED PCB assy
Sensor PCB assy
Front cover motor
Rubber piston
Switch
Outer motor cov. assy (incl silenc.)
Motor 230 V 1800W
Protector kit motor compartment
Main PCB assy 230 V
Fixation outer motor cover
Motor fixation rubbers
Noise red. around outer mot. cov.
Hose assy
Small nozzle
Crevice nozzle
Floor nozzle
All floor nozzle # 34, 35 mm
Deep Black 80231 PVC free
Telescopic tube (2TT)
Accessory holder
Parquet nozzle
Cord outlet Ink Black
Nozzle holder Pistil Red

FC8130/01
4-8
EXPLODED VIEW
A
2x
B
2x
C
14
16
3
15
12
11
13
1 2
9
10
5
4

FC8130/01
5-8
EXPLODED VIEW
D
7x
E
2x
22
18
24
25
21
19
54
18
17
20
23
53

FC8130/01
6-8
EXPLODED VIEW
H
2x
F
2x
G
4x
K
2x
J
39
42
34
30
29
31
26
33
28
32
36
38
37

FC8130/01
7-8
EXPLODED VIEW
52
45
51
50
49
46
47

FC8130/01
8-8
Version history
Version 1.1 : FC8130/01 initial release.
Version 1.2 : Due to standardisation the following Service codes have been changed:
Pos. Nr. 45: Hose assy, Service code 4222 459 46591 changed into 4322 004 25181.
Pos. Nr. 51: Accessory holder, Service code 4322 004 23831 changed into 4322 004 25201.
Pos. Nr. 52: Parquet Nozzle, Service code 4222 459 49031 changed into 4322 004 25141.
Version 1.3 : Pos. Nr. 45: Hose assy, Service code 4322 004 25181 changed into 4222 459 46591.
Version 1.4 : In Parts List: Added Pos. 49: 4322 004 25701 All oor nozzle # 34, 35 mm Deep Black 80231 PVC free.