Pineapple RYNO WALL SHELF User manual

REQUIRED
ITEMS
RYNO®WALLSHELF WALLFIXING
Wall mounting baton
(only provided with floor fixed version)
9 x large wall hardware fixings
10 x small wall hardware fixings
Handheld power drill
Tools for wall fixing hardware
Drill bit for wall fixing hardware
These instructions apply only when fixing to a brick wall with no obstructions (e.g. cables, plumbing, etc.).When
fixing to any other surface,or with obstructions, please contact your Pineapple representative for further advice
[phone]
T
E
[e-mail]

04
01
Mark position of baton for correct location
of unit
02
03
Attach baton to wall using suitable load
bearing wall fixings
Hang wall unit onto baton ensuring it is
seated correctly and unit is horizontal
Drill through fixing points with a pilot drill and
install suitable hardware into the wall
[phone]
T
E
[e-mail]
RYNO®WALLSHELF WALLFIXING

05
Drill appropriately sized holes through wall
unit and secure to wall using appropriate
fixing and washers
[phone]
T
E
[e-mail]
RYNO®WALLSHELF WALLFIXING

Ensure the proper and adequate hardware is used to secure furniture
Ensure fixings are appropriate for the anchoring material
Use fixings of an appropriate strength and consider using security fixings in
challenging environments
Consider using high strength thread-locker on fixings in challenging environments
Ensure all gaps are sealed with the appropriate anti-pick mastic after product
installation if necessary
Please read all instructions carefully to ensure proper installation. Failure to read and
follow instructions may result inadequate product installation and void of warranty
Pineapple shall not be held liable for any consequences caused by the improper
installation of products to the installer or the end user
[phone]
T
E
[e-mail]
DISCLAIMER