Pioneer 7MT030 User manual

Installation Guide
Bathroom Accessories:
7MT030•
7MT031•
7MT032•
7MT033•
7MT034•
REV-11 19, 12
Engineering Excellence
Pioneer Industries, Inc. © 2012
Engineering Excellence
Engineering E xc ellence

2REV-11 19, 12
Thank you for purchasing this pioneer quality product.
Tools Required
Level Tape Measure Straight &
Philips Screw-
drivers
Prior to Installation
Do not use these products in any area where they are likely to be used•
inadvertently as a grab bar or support bar. These products are not designed
or intended for use as a grab bar or support bar.
Pioneer reserves the right to make changes in the design of faucets without•
noticeasspeciedinthepricebook.

3REV-11 19, 12
Bath Accessories Installation
Determine the installation location for the bathroom hardware.•
Drill 1/4” diameter hole approximate 1-1/8” apart. Place plastic anchors•
screws(B)intothedrilledholesusinghammertotapitinushwiththe
wall. Place the mounting plate (A) and secure them to the wall with the
help of mounting screws.
For 7MT030 & 7MT031 Install the mounting plate (A) 24-5/16” & 18-•
5/16” apart respectively.
Secure the bathroom hardware with the screw at the bottom. Do not•
overtighten.
For more care information or trouble shooting inquiries about your
Pioneer Product, please see the contact information on the back page.

4REV-11 19, 12
3325S.GareldAve.|Commerce,CA90040
Telephone:(800)338-9468|(323)888-8873|Fax:(323)888-9515
Hours: M - F, 7:30am to 5:00pm PST
www.pioneerind.com
Engineering Excellence
Eng ineering E xcellence