Plantronics BackBeat Pro User manual

BackBeat PRO/
BackBeat PRO+
User Guide

Contents
What's in the box 3
Headphone overview 4
Power on/off 4
Active Noise Canceling 4
Play/pause music 4
Volume 4
Track selection 4
OpenMic 4
Voice dial (phone feature) 4
Answer or end a call 4
Decline a call 4
Mute/unmute 4
Call back last call 4
Pairing mode 4
Be safe 4
Pair 5
Pair to mobile device 5
NFC pairing (Android) 5
Plug and play 5
Pair USB adapter again 5
Pair second device 6
Charge and fit 7
Charge 7
Adjust the fit 7
More Features 8
Use sensors 8
Reset Sensors 8
Flexible power 8
Advanced OpenMic 8
Customize 8
Specifications 9
Support 10
2

RL
ANC
Headphones Ballistic nylon travel case
Charging cable 3.5mm cable
Bluetooth USB adapter*
NOTE * BackBeat PRO+ only
What's in the box
3

ANC
RL
ANC
Slide the switch to power on or off.
Slide the switch to activate or deactivate ANC to block out unwanted noise.
Tap the Play/pause button on the left ear cup to play or pause music.
Rotate the volume wheel forward (+) or backward (–) to control the volume.
Rotate the track wheel forward or backward to control the track selection.
Hear your surroundings by tapping the Mic button when not on a call.
If your smartphone has a voice-enabled assistant, press the call button for 3 seconds and wait
for phone prompt.
Tap the Call button on the right ear cup.
Press and hold the Call button for 2 seconds.
While on an active call, choose:
• Tap the Mic button
• Take off/put on your headset while on an active call (requires active smart sensors)
Double-tap the Call button .
With your headphones powered on, press and hold the Call button until you hear "pairing" and
the LEDs flash red and blue.
Please read the safety guide for important safety, charging, battery and regulatory information
before using your new headset.
Headphone overview
Power on/off
Active Noise Canceling
Play/pause music
Volume
Track selection
OpenMic
Voice dial (phone feature)
Answer or end a call
Decline a call
Mute/unmute
Call back last call
Pairing mode
Be safe
4

BackBeat PRO and BackBeat PRO+ pair differently the first time.
1For BackBeat PRO The first time you power on your headphones, the pairing process begins.
Holding your headphones, slide the power switch to the ON position. The LEDs flash red and blue.
R
2For BackBeat PRO+ Power on your headphones, then press and hold the Call button until the
LEDs flash red and blue.
3Activate Bluetooth®on your phone and set it to search for new devices.
•iPhone Settings > Bluetooth > On*
•Android Settings > Bluetooth: On > Scan for devices*
NOTE *Menus may vary by device.
4Select “PLT_BBTPRO.”
Once successfully paired, you hear “pairing successful” and the headphone LEDs stop flashing.
1Ensure NFC is on and your phone’s display is unlocked. (Phones may vary.)
2Tap and hold the headphones to the phone’s NFC tag location until NFC pairing completes. If
necessary, accept the connection.
NOTE The headphone’s NFC tag is located on the outside of the left ear cup. (Phone tag locations
vary.)
L R
BackBeat PRO+ only The high-fidelity Bluetooth USB adapter comes pre-paired to your
heaphones so you can listen music and make calls on your computer.
1With your headphones powered on, insert the USB adapter into your laptop or PC. Pairing is
successful when you hear “pairing successful” and the USB adapter is solid blue.
2Go to sound preferences and select “BT600” as the default device to configure your adapter to
play music.
1Insert the high-fidelity Bluetooth USB adapter into your laptop or computer and wait for your
computer to recognize it.
2Put your headphones in pair mode.
3Put your USB adapter into pair mode by gently pressing and holding the recessed Pair button until
the USB adapter flashes red and blue.
Pair
Pair to mobile device
NFC pairing (Android)
Plug and play
Pair USB adapter again
5

Pairing is successful when you hear "pairing successful" and the USB adapter LED is solid blue.
1Press and hold the Call button until the LEDs flash red and blue.
2Activate Bluetooth on your second device and follow the last two steps of "Pair to mobile device."
Pair second device
6

It takes up to 3 hours to fully charge your headphones. The LEDs turn off once charging is
complete.
=
=
=
=
=
TIP To check the headphones battery status, tap the Call button while wearing your headphones.
Headphones must be in idle state.
Your headphones have up to 24 hours of listening time.
Adjust the headphones for a comfortable fit.
Lengthen or shorten the band until it fits comfortably. When not using your headphones, fold the
ear cushions in and against your body.
Charge and fit
Charge
Adjust the fit
7

Smart sensors respond when you put on or take off your headphones.
With active sensors putting on the headset will: taking off the headset will:
Incoming mobile call answer the call
Music/media resume music/media (if playing
previous to taking off)*
pause music/media (if playing)*
Mute unmute if on an active call mute if on an active call
NOTE *Functionality varies by application. Does not function with web-based apps.
You may need to reset the sensors if they are not working as expected.
To reset the headset sensors, connect it directly to your computer's USB port, and place it, with
the ear cups up, on a flat, non-metallic surface for more than 10 seconds.
When the battery is exhausted, use your headphones with the provided 3.5 mm cable.
Use the cable to:
• Adjust the volume with the (+) and (–) buttons
• Play/pause music or answer/end a call with the center button = single tap
• Track forward with the center button = double tap*
• Track backward with the center button = triple tap*
• Activate smartphone voice-enabled assistant with the center button = 3 second press*
NOTE *Specific to BackBeat PRO+
When listening to music, you will be able to hear your surroundings by activating OpenMic .
To increase or decrease the microphone level, rotate the volume wheel forward (+) or
backward (–). To cancel OpenMic, press the Mic button again.
Your headphones speak in English. You can change the language and other settings using your
PC/Mac, the updating tool, and the provided USB cable.
The updating tool (plantronics.com/myheadset-updater) enables you to:
• Change language
• Receive firmware updates
• Turn "mute off" voice alert on/off
• Turn smart sensors on/off
More Features
Use sensors
Reset Sensors
Flexible power
Advanced OpenMic
Customize
8

Listening time Up to 24 hours wireless streaming*
Standby time Up to 21 days*
DeepSleep mode Up to 180 days*
Operating distance (range) Up to 100 meters/330 feet from phone or tablet with
Class 1 Bluetooth
Headphones weight 340 grams
Audio aptX®low latency codec2AAC codec2, 40mm dynamic
drivers, Frequency response 20-20kHz
Noise canceling Controllable Active Noise Canceling (ANC) plus Digital
Signal Processing (DSP) and dual microphones
Multipoint Simultaneously connect two Bluetooth devices (2H2S)
Status alerts Spoken alerts in 14 language options, which vary by
region (US and UK English, Cantonese, Danish, EU-
French, German, Italian, Japanese, Korean, Mandarin,
Norwegian, Russian, EU-Spanish and Swedish)
Battery type Rechargeable, non-replaceable lithium-ion
Charge time (maximum) Up to 3 hours
Cables USB charging and angled 3.5mm with inline mic
(compatible with Apple devices)
Bluetooth v4.0 + EDR A2DP for audio streaming, AVRCP for music controls,
Hands-free v1.6 for wideband, and Headset v1.2
Operating and storage temperature 32°F – 104°F (0 – 40°C)
NOTE * Performance is dependent upon battery and may vary by device.
Specifications
9

EN
Tel: [phone]
FI
Tel: [phone]
NO
Tel: [phone]
AR
Tel: [phone]*
FR
Tel: [phone]
PL
Tel: [phone]*
CS
Tel: [phone]*
GA
Tel: [phone]
PT
Tel: [phone]
DA
Tel: [phone]
HE
Tel: [phone]*
RO
Tel: [phone]*
DE
Deutschland 0800 9323 400
Österreich 0800 242 500
Schweiz 0800 932 340
HU
Tel: [phone]*
RU
Tel: [phone]
Tel: [phone]*
EL
Tel: [phone]*
IT
Tel: [phone]
SV
Tel: [phone]
ES
Tel: [phone]
NL
NL 0800 7526876
BE 0800 39202
LUX 800 24870
TR
Tel: [phone]*
*Support in English
For warranty details, go to plantronics.com/warranty.
Support
NEED MORE HELP?
plantronics.com/support
Plantronics, Inc. Plantronics BV
345 Encinal Street
Santa Cruz, CA 95060
United States
South Point Building C
Scorpius 140
2132 LR Hoofddorp, Netherlands
©2015 Plantronics, Inc. All Rights Reserved. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics is under license. All
other trademarks are the property of their respective owners.
Patents: CN ZL201430495604.9; EM 002592337; patents pending.
203024-06 (09.15)