Plantronics backbeat FIT 300 series User manual

BackBeat FIT 300 Series
User Guide

Contents
Inline controls overview 3
Be safe 3
Pair 4
Get paired 4
Pair mode 4
Basics 5
Power on or off 5
Answer or end a call 6
Adjust the volume 6
Music and more 7
Reconnect 10
Mute the headset 10
Redial 10
Charge and fit 11
Charge 11
Get the best sound 11
Wear the headset 12
Headset Features 13
Quick charge 13
Pair multiple devices 13
Use two devices 13
Voice control 14
Voice prompts 14
DeepSleep Mode 15
Install the app 15
Support 16
2

voice
:02
:02:04
:02
:04
:02
Charge port
Headset indicator light (LED)
Center button: Play/pause music
Center button: Activate voice dialing, search and other smartphone controls
Center button: Answer/end/decline call
Center button: Redial
Center button: Power on/off
Center button: Status check; battery level and connection status
+Volume up button: Skip to next track
+Volume up button: Increase volume
+Volume down button: Play previous track
+Volume down button: Decrease volume
+ or - Volume up or Volume down button: Mute/unmute
Please read the safety guide for important safety, charging, battery and regulatory information
before using your new headset.
Inline controls overview
Be safe
3

The first time you power on your headset, the pairing process begins.
1Power on the headset by pressing the Center button until you hear "pairing" and the LED light
flashes red and blue.
2Activate Bluetooth®on your phone to search for new devices.
•iPhone > Settings > Bluetooth > On*
•Android > Settings > Bluetooth > On > Scan*
NOTE *Menus may vary by device.
3Select “PLT BBFIT300 SERIES .”
If necessary, enter four zeros (0000) for the passcode or accept the connection.
Once successfully paired, you hear “pairing successful” and the indicator light stops flashing.
With the headset powered off, press and hold the Center button until you hear "pairing."
NOTE You can connect up to 2 devices to your headset.
Pair
Get paired
Pair mode
4

Press the Center button for 2 seconds until you hear 'power on or 'power off'.'
Basics
Power on or off
5

Tap the Center button.
Tap the Volume up (+) or down (–) button.
Answer or end a call
Adjust the volume
6

Listen to your music, podcasts, navigation and other streaming audio on your headset.
NOTE Functionality varies by application.
Play or pause audio
Tap the Center button.
Skip to next track
Press the Volume up (+) button for more than 1 second.
Music and more
7

Restart track
While audio is being paused, tap the center button, you hear the track restart.
Play previous track
Press the Volume down button until you hear the confirmation tone to restart the current track.
Press the button twice (each press until the confirmation tone sounds) to go to the previous track.
Access music and call controls
Access the inline control with your right hand or left hand-whichever feels most natural.
8

.
L
R
9

If your headset loses Bluetooth connection with your phone, it will automatically try to reconnect.
If your headset can't reconnect, tap any key once or manually connect through the phone's
Bluetooth. If your headset remains out of range for more than 90 minutes, the DeepSleep mode
will activate.
During a conversation, press and hold the Volume up button or the Volume down button until you
hear “mute on” or “mute off." An alert repeats every 15 minutes when mute is on.
Double-tap the Center button to call the last number you dialed.
Reconnect
Mute the headset
Redial
10

The door covering the charging port is located on the left side of the control panel. Open it with
your fingernail. For best performance, fully charge your battery before use.
It takes up to 2 hours to fully charge the headphones from a completely drained battery state.
While charging, the indicator light is red and turns off once charging is complete.
For the best sound, a good seal with your ear canal is essential. Try on the three different sized
eartpips to find which one fits you best. You may end up with a different size eartip in each ear for
the best fit. The right side eartip notch is larger than the left side eartip.
1Try it out Put the earbuds in your ears and make sure the stabilizing loop is tucked securely in your
ear for stability.
The stabilizing loop should be comfortable once it is tucked securely in your ear.
Listen to your favorite song while trying out each eartip and select the one that gives you the best
fit and sound.
2Remove the eartip To remove the eartip, pull straight out with some force.
Charge and fit
Charge
Get the best sound
11

3Replace the eartip Push the eartip onto the earbud tip marked with the "L" or "R" with the notch on
the rubber eartip lining up with the raised plastic notch in the earbud tip.
4Clean the eartip When eartips get soiled, it is recommended that you wipe the eartip with an
alcohol wipe or a cotton swab dipped in Isopropyl alcohol. The alcohol will kill bacteria that may
cause an odor and wipe away any dirt and earwax.
5When the cord becomes soiled, it is recommend that you use a damp soapy cloth to clean the
cable as needed.
1Drape the headset cord behind your neck and attach the clothing clip to the back of your shirt to
maximize fit and stability for headpnone.
2Another option for improving fit and stability is to cinch the excess cord up into a loop with the clip
instead of attaching it to your clothing.
Wear the headset
12

Charge empty battery 15 minutes for up to a full hour of music listening.
Your earbuds can pair and connect 2 devices. To enter pair mode after the first pairing process,
start with the earbuds powered on and idle. Press and hold the Volume up and the Volume down
buttons together until you hear 'pair mode' and the LED flashes red and blue.
It's easy to answer calls from two devices.
When on a call, you hear a ringtone notification of the incoming call from the second paired
device.
To answer a second call from the other device, tap the Center button to end the current call and
automatically answer the new call. If you choose to not answer the second call, it will go to
voicemail.
Headset Features
Quick charge
Pair multiple devices
Use two devices
13

Siri, Google Now™, Cortana When not on a call, press and hold the Voice button for 2 seconds
until you hear the tone. Wait for the phone prompt to activate voice dialing, search, and other
smartphone voice controls.
Your headset tells you about status changes. For example:
“Power on”
“Pairing successful”
"Phone 1 connected"
"No phone is connected"
“Mute on”
Voice control
Voice prompts
14

If you leave your headphones powered on but out of range of your paired phone for 120 minutes,
your headset conserves its battery power by entering into DeepSleep mode.
Once back in range with your phone, press the Center button button to exit DeepSleep mode.
Get the most from your headset by installing our free mobile app, Plantronics Hub for iOS/
Android. Explore all of your headset's features, view instructions, and contact Plantronics support
easily from your smartphone.
plantronics.com/software
DeepSleep Mode
Install the app
15

EN
0800 410014
FI
0800 117095
NO
80011336
AR
[phone]*
FR
0800 945770
PL
[phone]*
CS
[phone]*
GA
1800 551 896
PT
800 84 45 17
DA
80 88 46 10
HE
[phone]*
RO
[phone]*
DE
Deutschland 0800 9323 400
Österreich 0800 242 500
Schweiz 0800 932 340
HU
[phone]*
RU
8-800-100-64-14
[phone]*
EL
[phone]*
IT
800 950934
SV
0200 21 46 81
ES
900 803 666
NL
NL 0800 7526876
BE 0800 39202
LUX 800 24870
TR
[phone]*
*Support in English
For warranty details, go to plantronics.com/warranty.
Support
NEED MORE HELP?
plantronics.com/support
Plantronics, Inc. Plantronics B.V.
345 Encinal Street
Santa Cruz, CA 95060
United States
Scorpius 171
2132 LR Hoofddorp
Netherlands
©2017 Plantronics, Inc. BackBeat, DeepSleep, Plantronics, and Simply Smarter Communications are trademarks of Plantronics, Inc. registered in the US
and other countries, and PLT is a trademark of Plantronics, Inc. iPhone and iTunes are trademarks of Apple Inc., registered in the U.S. and other countries.
Bluetooth is a registered trademark owned by Bluetooth SIG, Inc. and any use by Plantronics, Inc. is under license. All other trademarks are the property of
their respective owners.
Patents: EM 002814079; patents pending.
208877-06 (07.17)