Plantronics BackBeat 500 SERIES User manual

BackBeat 500 SERIES
User Guide

The first time you power on your headphones, the pairing process begins.
1Slide the power switch on. You hear "pairing" and the LEDs flash red and blue.
2Activate Bluetooth®on your phone and set it to search for new devices.
•iPhone Settings > Bluetooth > On*
•Android Settings > Bluetooth: On > Scan for devices*
NOTE *Menus may vary by device.
3Select “PLT BB500 Series.”
If necessary, enter four zeros (0000) for the passcode or accept the connection.
Once successfully paired, you hear “pairing successful” and the LEDs stop flashing.
1Slide and hold the power button towards the Bluetooth icon until the LEDs flash red and blue.
2Select “PLT BB500 Series” in your device's Bluetooth Settings.
If your Mac is Bluetooth enabled, you can pair your headset to it.
1Place your headset in pair mode (slide and hold the power button towards the Bluetooth icon). You
will hear "pairing" and the LEDs will flash red and blue.
2On your Mac, choose Apple menu > System Preferences > Bluetooth.
3Click Set Up New Device or "+", select "PLT BB500 series stereo" and follow the onscreen
instructions.
Pair
Get Paired
Pair second device
Pair to Mac
3

It takes up to 2.5 hours to fully charge your headphones. The LEDs turn off once charging is
complete.
TIP To check the headphones battery status, tap the Call button while wearing your headphones.
Headphones must be in idle state.
Your headphones have up to 18 hours of listening time.
Charge and fit
Charge
4

Mute/unmute
Volume up
Volume down
Play/pause music
Track forward
Track backward
Bluetooth pair button
Power on/off
Call button
Be safe
Please read the safety guide for important safety, charging, battery and regulatory information
before using your new headset.
Slide the switch to power on or off.
Tap the Play/pause button.
Tap the Forward button or Back button to control the track selection.
If your smartphone has a voice-enabled assistant, press and hold the Call button for 2 seconds
and wait for the phone prompt.
Answer or end a call
Tap the Call button.
Decline a call
Press and hold the Call button for 2 seconds.
The basics
Headset overview
Power on/off
Play/pause music
Track selection
Activate voice assistant
Make/Take/End Calls
5

Call back last call (smartphone)
To dial your last number you dialed, double-tap the Call button.
During a call, press the volume up and down buttons. You hear "mute on/off."
Most headsets are found under car seats, in pockets or on a messy desk. For less obvious
locations, locate your headset by sending a tone to find it.
1Download the Plantronics Hub app for iOS and Android by visiting plantronics.com/software.
2Locate your lost headset by using Find MyHeadset within the Plantronics Hub app.
Mute
Find your headset
6

EN
0800 410014
FI
0800 117095
NO
80011336
AR
[phone]*
FR
0800 945770
PL
[phone]*
CS
[phone]*
GA
1800 551 896
PT
800 84 45 17
DA
80 88 46 10
HE
[phone]*
RO
[phone]*
DE
Deutschland 0800 9323 400
Österreich 0800 242 500
Schweiz 0800 932 340
HU
[phone]*
RU
8-800-100-64-14
[phone]*
EL
[phone]*
IT
800 950934
SV
0200 21 46 81
ES
900 803 666
NL
NL 0800 7526876
BE 0800 39202
LUX 800 24870
TR
[phone]*
*Support in English
For warranty details, go to plantronics.com/warranty.
Support
NEED MORE HELP?
plantronics.com/support
Plantronics, Inc. Plantronics B.V.
345 Encinal Street
Santa Cruz, CA 95060
United States
Scorpius 171
2132 LR Hoofddorp
Netherlands
©2017 Plantronics, Inc. BackBeat and Plantronics are trademarks of Plantronics, Inc. registered in the US and other countries, and Plantronics Hub is a
trademark of Plantronics, Inc. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics, Inc. is under license. All other
trademarks are the property of their respective owners.
Patents pending.
208780-06 (03.17)