Plantronics RIG 500 PRO Series User manual

RIG 500 PRO Series
User Guide

Contents
Setup and basics 3
Fit 3
Set up your headset 3
Adjust the volume 4
System volume 5
Mute 5
Support 6
2

1The headband adjusts to three sizes (small, medium, large) by moving the earcups. To remove an
earcup, press the earcup to detach it from the headband.
2To change your ear cushions, gently pull the ear cushion off. To replace it, align the notches.
Your headset components easily snap into the headset frame to configure the best fit and sound.
Follow the diagram to put your headset together.
Connect to PC RIG 500 PRO, RIG 500 PRO ESPORTS
Setup and basics
Fit
Set up your headset
3

Connect to console RIG 500 PRO ESPORTS, RIG 500 PRO HC, RIG 500 PRO HX/HX SE
Out of the box, the volume wheel has the Xbox One sleeve attached and the PS4 sleeve is supplied
(the RIG 500 PRO HS/HS SE models have the PS4 sleeve attached and the Xbox One sleeve is
supplied). Align notches on the appropriate sleeve and volume wheel before attaching to your
controller.
PS4 sleeve supplied in box
Xbox One sleeve attached
Xbox One
ALIGN
PS4
To adjust your headset volume, turn the volume wheel.
NOTE If your controller has a volume feature, you can lock the volume wheel at maximum by turning
it fully to the right.
Adjust the volume
4

To adjust system volume, check your console's user guide.
Lift the boom to a full stop to mute the microphone.
CAUTION Do not force the boom past its upper or lower limits.
System volume
Mute
5

Support
NEED MORE HELP?
plantronics.com/support
Plantronics, Inc. Plantronics B.V.
345 Encinal Street
Santa Cruz, CA 95060
United States
Scorpius 171
2132 LR Hoofddorp
Netherlands
©2018 Plantronics, Inc. All trademarks are the property of their respective owners.
Patents pending.
213538-06 (08.18)