Plantronics BackBeat GO 410 Series User manual

BackBeat GO 410 Series
User Guide

Contents
Headset overview 3
Be safe 3
Pair 4
Get paired 4
Pair mode 4
Install the app 5
The basics 6
Power on or off 6
Charge and fit 6
Answer or end a call 7
Adjust the volume 7
Music 7
Stay connected 9
Mute 9
Redial 9
More Features 10
Use two devices 10
DeepSleep mode 10
Smart magnet 11
Convertible cable 11
Headset pouch 11
Support 13
2

™
Siri
Google Assistant
:02
:02
:02
:02
:04
:02
:04
:02
ANC
:02
Smart
Magnet
Charge port
Indicator light (LED)
Answer/end: Tap 1 time (1x)
Power on: Tap and hold 2 seconds
Power off: Tap and hold 4 seconds
Bluetooth®pairing: With headset powered off, tap and hold 4 seconds
Play/pause music: Tap 1 time (1x)
Next track: Tap and hold 2 seconds
Previous track: Tap and hold 2 seconds
Siri, Google
Assistant™
Tap and hold 2 seconds
+ Volume up button: Tap to increase volume
- Volume down button: Tap to decrease volume
+ and - Volume up and down button: Mute/unmute
+ and Active Noise Cancelling: Tap and hold 2 seconds to toggle on/off
- and Smart Magnet: Tap and hold 2 seconds to toggle on/off
Please read the safety guide for important safety, charging, battery and regulatory information
before using your new headset.
Headset overview
Be safe
3

The first time you power on your headset, the pairing process begins.
1Power on the headset by pressing the Center button until you hear "pairing" and the LED light
flashes red and white.
:04
“Pairing”
2Select “PLT BBGO410 Series .”
If necessary, enter four zeros (0000) for the passcode or accept the connection.
Once successfully paired, you hear “pairing successful” and the indicator light stops flashing.
With the headset powered off, press and hold the Center button until you hear "pairing."
NOTE You can connect up to 2 devices to your headset.
Pair
Get paired
Pair mode
4

Get the most from your headset by downloading our free app, BackBeat for iOS/Android™.
With this app, you can:
• Select language
• Turn features on/off
• Find MyHeadset
• View the user guide
For maximum benefit, install the BackBeat app on every device paired to the headset.
Install the app
5

Press the Center button until you hear “power on" or "power off."
Charge
It takes 2 hours to fully charge the headset. The headset LED turns off once charging is complete.
Fit
Out of the box, the medium eartips are installed on the earbuds. Try each eartip (small, medium
and large) and choose the eartip with the best fit for each ear.
RL
The basics
Power on or off
Charge and fit
6

Replace eartips
Changing the eartips and locking them in place is easy. Left and right are indicated on the earbud
and on the eartip.
1To put the eartip on the earbud, hold the eartip loop, place it over the earbud and pull the eartip up
and over the small tab on back of earbud to click it in place.
2Ensure that you can't see the tab and the eartip is locked in place.
Tap the Center button or use your softphone.
To adjust the volume, tap the Volume up or Volume down button.
Play or pause music
Tap the play/pause button once.
Skip to next track
Press the Volume up (+) button for 2 seconds.
Answer or end a call
Adjust the volume
Music
7

voice
:02
:02:04
:02
Play previous track
Press the Volume down (-) button for 2 seconds.
8

Bluetooth has a working “range” of up to 33 feet between the phone and headset before audio
degrades and the connection is lost. If you lose connection, your headset will try to reconnect
once you move back into range.
During a call, press the Volume up and Volume down buttons. You hear "mute on/off."
Double-tap the Center button to call the last number you dialed.
Stay connected
Mute
Redial
9

It's easy to answer calls from two devices.
When on a call, you hear a ringtone notification of the incoming call from the second paired
device.
To answer a second call from the other device, tap the Center button to end the current call and
automatically answer the new call. If you choose to not answer the second call, it will go to
voicemail.
If you leave your headphones powered on but out of range of your paired phone for 90 minutes,
your headset conserves its battery power by entering into DeepSleep mode.
Once back in range with your phone, press the Center button button to exit DeepSleep mode.
More Features
Use two devices
DeepSleep mode
10